Instructions

13
Open the chamber
Once the clearing cycle has completed, you
can press the Open/Close button to raise the
platform and your smoothed part.
Install the Reservoir Cover
If you do not plan to use your Polysher
TM
again in the near future, we recommend
exchanging the grate cover with the solid
cover to inhibit solvent evaporation, avoid
vapor buildup in the chamber, and prevent the
nebulizer sponge from drying out.
Dry the part
You can now remove the platform from the
Polysher
TM
. Do not touch the part yet as the
surface may be sticky and you may leave
nger marks on the part. The part should be
left to dry for about an hour before gentle
handling. You can use the other platform to
polish another part, if needed. The part will
slowly harden after a couple of weeks, to
speed up the process you can use a fan.
4
5
6