Polycom Soundstation 2W- User Guide

SoundStation2W™ Administrator Guide - 35
Flash Timing
You can adjust the timing of the Flash de-
lay to 75, 100, 300, or 600 milliseconds.
1. Press the Menu button, choose Ad-
min Setup and press the Select but-
ton, enter the passcode (if required)
and press the ENTER soft key.
2. Choose Phone System followed by
Flash Timing from the available op-
tions and press the Select button.
3. Use the <- and -> soft keys to step
through the available Flash Timing
options.
4. Press the SAVE soft key to save
changes. You may press the Exit
button to cancel your selection.
5. After about 15 seconds you should
hear the tone, and you should see
READY appear on the console’s
LCD screen. This indicates that the
console and base station have recon-
nected. The new settings will now
be active.
If you change the Flash Timing
setting while you are on a call, the
new setting will become stored as
soon as the user goes back onhook
after the call.