Assembly instructions Patton Counter Stool ASSEMBLY REQUIREMENT 1 PERSON ASSEMBLY | 10 MINUTES ASSEMBLY TIME (APPROXIMATE) TOOLS REQUIRED: ALLEN WRENCH (PROVIDED) ASSEMBLY PREPARATION 1. Remove all packaging materials, staples and packing straps from ihe carton, 2. Refer to Parts Checklist and ensure they are complete before you start assembling, 3. Place all components an a clean, flat and soft surface carpet or rag) 16 prevent ports from getting scratched, TIPS FOR ASSEMBLY 1.
PARTS CHECKLIST Allen Wrench X4 Screws X4 Crush Washers x4 Washers fa po a, STEP. Tr While sitting, place stool seat upside down In your lap with backrest hanging over knees. Align stool base with holes and secure the legs to the seat using washers C.D and screws B as shown, NOTE: First hand tighten ofl 4 screws and then photofinishing an Allen wrench A, NOTE The stool leg may need to be adjusted to align properly for installation.
Missing something? We work very hard to ship a perfect product; but sometimes furniture or hardware go missing of get damaged in transit, Please contact us ond we'll quickly mike fright. [DO O Need some help? Our support team is here for you. £2 help@polyandoarkcom %. 1(855) 310-1450 (Dpolyandbark.