COP VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:Layout 1 25/02/2014 14.10 Pagina 2 Polti S.p.A. - 22070 Bulgarograsso (CO) - Italy - Via Ferloni, 83 www.polti.
COP VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:Layout 1 G I B Pagina 1 2 3 2A C 6 K D J 14.09 5 A L 25/02/2014 9 1 4 17 11 9 11 16 F 8 H 10 E 13 7 11 15 12 20 22 14 11 21 OPTIONAL 11 18 19 11 V 24 11 U R S Q 11 5 T 6 4 Fig. A Fig. 1 Fig. 2 Fig. 3 Fig.4A Fig. 5 Fig. 6 Fig. 7 Fig.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 14 VAPORETTO ECO PRO 3000 ENGLISH • • • • • • • • • • PRECAUTIONS KEEP THESE INSTRUCTIONS Read these instructions carefully before using the appliance. Any use which does not comply with these instructions will invalidate the warranty. If this instruction manual is lost, it is possible to review it and/or download it from the web site www.polti.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 15 VAPORETTO ECO PRO 3000 - The wiring system to which the appliance is connected must always comply with the laws in force. - Before connecting the appliance, make sure that the mains voltage is the same as the voltage indicated on the data label of the appliance and that the power outlet is connected to earth. - Always turn off the appliance at the on/off switch before unplugging it.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 16 VAPORETTO ECO PRO 3000 ENGLISH SAFETY WARNINGS: Risk of injury and/or burns during use of the appliance - Use of the appliance in places where there is a danger of explosions is prohibited. - Do not use the product with toxic substances. - In case of breakdown or malfunction switch off the appliance and never attempt to disassemble it, but refer to an authorized Polti Service Centre.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 17 VAPORETTO ECO PRO 3000 - This appliance has been designed to work with normal tap water. Absolutely do not use distilled water, dryer condensate water, perfumed water, rain water, battery water, water from air conditioning systems and the like. Do not use chemical substances or detergents. - Do not use limescale products other than Kalstop FP2003. - Never leave the appliance exposed to the weather.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 18 VAPORETTO ECO PRO 3000 Read these instructions carefully before using the appliance. ENGLISH Dear Customer, Congratulations and thank you for purchasing this POLTI product, contributing to the conservation of our most precious natural resource: the Environment.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 19 VAPORETTO ECO PRO 3000 CORRECT USE OF THE PRODUCT This appliance is intended for home use as a steam cleaner as described and in accordance with the instructions provided in this manual. Please read these instructions carefully and keep them, as you may find them useful in future. SET UP Before using VAPORETTO for the first time assemble the pivoting wheels as indicated in the Fig. A.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 20 VAPORETTO ECO PRO 3000 ENGLISH NOTE: when filling, make sure that the water does not overflow, to avoid wetting the surface on which your Vaporella is resting STEAM REGULATION FEATURE VAPORETTOs are equipped with a steam regulation control (I) (Fig. 5). You can increase the steam flow by turning the control in clockwise direction. Turning it in an anti- clockwise direction reduces the steam flow.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 21 dure here below when re-filling the generator tank. According to model, ‘water out’ is indicated by a warning light (J), or by an audible alarm signal from the machine, or on more basic models by the exhaustion of the steam output. When you have used up all the water in the tank, proceed as follows: • Switch off the machine at the generator on/off switch (B).
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 22 ENGLISH VAPORETTO ECO PRO 3000 surface to make dirt rise to the surface, cover the brush with a cotton cloth locking it in the relevant lever hooks (9), then wipe the surface again to collect the dirt. Proceed rapidly and without pressing over the carpet, running the brush forward, backward and sideways without pausing too long at the same point.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 23 • • • • - - CARE OF YOUR VAPORETTO Before carrying out any maintenance on the device, always unplug it from the power mains making sure that the product has cooled down before proceeding. After using the brushes, we recommend letting the bristles cool down in their natural position, in order to avoid any deformation. To clean the body of the appliance, simply use a moist cloth.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 24 VAPORETTO ECO PRO 3000 ENGLISH tion e.g. for removing creases from curtain, clothing etc • To obtain a continuous jet of steam move the sliding button (U). The steam will continue to come out even when the steam request button (R) is released. To stop the steam flow move the sliding button backwards (U). STEAM DISINFECTOR (mod.
VT ECO PRO 3000 - 1U02 PRELIMINARE 2014:VT 2300 M0S05357 1L05 25/02/2014 14.26 Pagina 25 VAPORETTO ECO PRO 3000 TROUBLESHOOTING The appliance does not turn on. CAUSE SOLUTION Power cable (F) not plugged in Connect the power supply cable (F) to a suitable electric socket. Boiler switch (B) off Turn on the boiler switch (B). The appliance is not pressurised Wait the pressure indicator (K) goes off.
