Speaker User Manual

12
For more information visit our web site at http://www.polkaudio.com
11
For customer service call 800-377-7655
PSW350
Driver Complement:
1 - 10" (254mm) woofer
Amplifier Power*:
FTC Rated Amplifier Power:
100 watts continuous into 4ohms @ .05% 30 -
200Hz
Dynamic Power:
260 watts
Calculated Maximum Output (in-room):
110dB
Enclosure Type:
direct radiating, vented
Port Type:
dual, rear firing
Overall Frequency Response:
25Hz - 180Hz
-3dB Limits:
38Hz - 160Hz
Crossover Frequency:
adjustable 60Hz - 160Hz
Phase Control:
switch 0º or 180º
Inputs:
speaker, LFE and line level
Outputs:
speaker level
Available Finish:
black
Dimensions:
(includes binding posts & heat sinks)
15"H x 13 1/2"W x 18 1/2"D
381mmH x 342.9mmW x 469.9mmD
Shipping Weight:
40lbs • 18.2kg
PSW450
Driver Complement:
1 - 12" (304.8mm) woofer
Amplifier Power*:
FTC Rated Amplifier Power:
150 watts continuous into 4ohms @ <1% 30 -
200Hz
Dynamic Power:
350 watts
Calculated Maximum Output (in-room):
113dB
Enclosure Type:
direct radiating, vented
Port Type:
dual, rear firing
Overall Frequency Response:
25Hz - 160Hz
-3dB Limits:
35Hz - 125Hz
Crossover Frequency:
adjustable 60Hz - 125Hz
Phase Control:
switch 0º or 180º
Inputs:
speaker, LFE and line level
Outputs:
speaker level (switchable 80Hz or full range)
Available Finish:
black
Dimensions:
(includes binding posts & heat sinks)
17 1/2"H x 15"W x 19"D
444.5mmH x 381mmW x 482.6mmD
Shipping Weight:
45lbs • 20.5kg
SPECIFICATIONS
*This specification conforms to Federal regula-
tions regarding amplifier power ratings. For
purposes of comparison, be certain that all
power ratings conform to these stringent FTC
regulations. Power ratings alone connot predict
actual sound output. For this reason we also
specify the calculated maximun sound output.
SPECIFICATIONS
TROUBLE SHOOTING
Possible Solution
• Check AC plug and green LED on
the back; make sure outlet is opera-
tional
• Check volume control on subwoofer
• For speaker level wire conections,
check (+) on amplifier to (+) on
subwoofer and do the same for
(-) to (-)
• Check that RCA line level inputs of
the subwoofer are not wired from
speaker level outputs of amplifier
• Turn crossover frequency down
• Move phase switch to “REV”
and compare
• Turn volume up on subwoofer
• Move subwoofer into corner
• Move phase switch to “REV”
and compare
• Secure all wire and line level
connections
• Route all speaker and/or line level
connections away from AC wires
• Check for bad RCA phono cable
(hookup option 2,3,4)
PROBLEM
No Bass
Excessive
Mid-bass
Not
Enough
Bass
Hum from
Subwoofer
PSW250
Driver Complement:
1 - 8" (203.2mm) woofer
Amplifier Power*:
FTC Rated Amplifier Power:
50 watts continuous into 4ohms @ .03% 30 -
200Hz
Dynamic Power:
125 watts
Calculated Maximum Output (in-room):
105dB
Enclosure Type:
direct radiating, vented
Port Type:
dual, rear firing
Overall Frequency Response:
30Hz - 180Hz
-3dB Limits:
40Hz - 160Hz
Crossover Frequency:
adjustable 80Hz - 160Hz
Phase Control:
switch 0º or 180º
Inputs:
speaker and line level
Outputs:
speaker level
Available Finish:
black
Dimensions:
(includes binding posts & heat sinks)
13"H x 11 1/2"W x 18 1/2"D
330.2mmH x 292.1mmW x 469.9mmD
Shipping Weight:
33lbs • 15kg
SPECIFICATIONS