SDS

ManualsBrandsPlymouth Foam ManualsBuilding materials5-1/2" x 50' Foam Sill Sealer

Polyethylene Foam

1 of 6

SAFETY DATA SHEET

Polyethylene Foam

Version: 1

Preparation date:

2015-06-01

1. IDENTIFICATION

Product Name:

CELL-AIRE®, CORRO-FOAM®, CELLUPLANK®, ETHAFOAM®,

ETHAFOAM® 260CI, ETHAFOAM® HRC, ETHAFOAM® MRC, ETHAFOAM®

M SERIES, SYNERGY®, STRATOCELL®, STRATOCELL® PLUS,

STRATOCELL® RC, CELLU-CUSHION®, CELLU- CUSHION® 84, AND OPTI-

STEP

POLYETHYLENE FOAMS. INCLUDES VARIOUS EXTRUDED

POLYETHYLENE FOAM PROFILES AND LAMINATES (DOLPHIN-PAD™).

Product Code:

Not Applicable

SDS#:

PE-01

Recommended Use:

Foam packaging used for cushioning and product protection.

Uses Advised Against:

Uses other than those identified are not recommended

Manufacturer, Importer,

Supplier:

Sealed Air Corporation (US)

7665 National Turnpike, Building D

Louisville, KY 40214-4801

Phone: (502) 380-4333

Emergency Telephone

Number:

Chemtrec 800-424-9300

2. HAZARD(S) IDENTIFICATION

Classification of the substance or mixture:

This product is not classified as hazardous according to OSHA 29CFR 1910.1200 (HazCom 2012-GHS).

Signal Word:

Not applicable

Hazard Statements:

Not applicable

Precautionary statements:

Wash hands thoroughly after handling.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact

lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get

medical advice/attention.

Health hazards not otherwise classified (HHNOC) -

Not applicable

Physical hazards not otherwise classified (PHNOC)

This polyethylene foam is made with a flammable

hydrocarbon blowing agent, most of which is

removed prior to shipment. However, residual

flammable vapors may gradually exhaust from the

foam during storage, fabrication or use. Avoid close

confinement of large foam quantities and sources of

ignition near the foam (i.e. smoking, sparks, and

flames). Do not store near heating equipment.

Heating equipment should be inspected regularly

during every heating season to check for pinholes or

larger defects in the combustion chamber. Burns

readily when exposed to plentiful and hot ignition

sources. Use self-contained breathing apparatus in

the event of fire.

Summary of content (6 pages)

PAGE 1
SAFETY DATA SHEET Polyethylene Foam Version: 1 Preparation date: 2015-06-01 1. IDENTIFICATION Product Name: Product Code: SDS#: Recommended Use: Uses Advised Against: CELL-AIRE®, CORRO-FOAM®, CELLUPLANK®, ETHAFOAM®, ETHAFOAM® 260CI, ETHAFOAM® HRC, ETHAFOAM® MRC, ETHAFOAM® M SERIES, SYNERGY®, STRATOCELL®, STRATOCELL® PLUS, STRATOCELL® RC, CELLU-CUSHION®, CELLU- CUSHION® 84, AND OPTISTEPTM POLYETHYLENE FOAMS. INCLUDES VARIOUS EXTRUDED POLYETHYLENE FOAM PROFILES AND LAMINATES (DOLPHIN-PAD™).
PAGE 2
3. COMPOSITION/INFORMATION ON INGREDIENTS Classified Ingredients: Polyethylene Hydrocarbon Gas Glycerol Stearate Color Concentrate CAS No. 9002-88-4 75-28-5 or 74-98-6 Mixture Variety Weight % 85-100 0-5 0-2 0-1 Exact percentages and CAS numbers are being withheld as trade secret information. Occupational exposure limits, if available, are listed in Section 8. 4. FIRST-AID MEASURES Description of necessary first aid measures: Eyes: IF IN EYES: Rinse with water for several minutes.
PAGE 3
6. ACCIDENTAL RELEASE MEASURES Personal precautions: No information available. Environmental precautions: No information available. Methods and materials for containment and cleaning up: No information available. 7. HANDLING AND STORAGE Handling: Fabricating operations which cut large numbers of interior foam cells, can release localized amounts of flammable, residual blowing agent. Provide adequate ventilation to avoid the buildup of blowing agent concentration.
PAGE 4
Evaporation rate: Not available Viscosity: Not available *Only trace amounts of residual blowing agent (under 2 wt%) present in the foam. 10. STABILITY AND REACTIVITY Reactivity: No specific test data related to reactivity available for this product or its ingredients. Stability: Stable at room temperature. Possibility of Hazardous Reactions: Not applicable. Hazardous Decomposition Products: Not available. Materials to Avoid: Contact with strong oxidants for extended time.
PAGE 5
14. TRANSPORT INFORMATION DOT: Not regulated. TDG: Not regulated. IMDG: Not regulated. IATA: Not regulated. DOT (Ground) Bill of Lading Description: Not regulated. IMDG (Ocean) Bill of Lading Description: Not regulated. Note: Transport large quantities of this polyethylene foam in ventilated vehicles. Exercise caution when opening vehicles containing this polyethylene foam to avoid all possible sources of ignition (i.e. lit tobacco products, sparks and flames) near the foam and vehicle.
PAGE 6
16. OTHER INFORMATION Version Number: 1 Preparation date: 2015-06-01 SDS Code: PE-01 Reason for revision: Not applicable. Prepared by: NAPCRA Additional advice: Not applicable. Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, expressed or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control.