Installation Guide

031518-1
Plastic Development Group, LLC, Southfield, MI 48075 • www.plasticdevelopmentgroup.com Made in China
Step 6:
Attach the 2
Straps to the
Lid and Side
Panels with
the four Bolts
and and Washers.
Side Panel
Lid Panel
Straps
Step 5:
Hold the Lid Panel
horizontally and line
up the Lid Tabs with
Back Panel Hinge
Pins. Push Lid Panel
horizontally into Backhorizontally into Back
Hinge Pins and rotate
the Lid closed to lock
into place.
Hinge Pins
Lid Panel
Lid Tabs
Step 4:
Slide Front Panel
into position using
the slots at the front
of the Side Panels.
Press the Lock-Tabs
into the slots in theinto the slots in the
Bottom Panel to
lock in place.
Lock-Tab Slots
Side Panel
Front Panel
Step 3:
Slide Back Panel
into position using
the slots at the rear
of the Side Panels.
Press the Lock-Tabs
into the slots in theinto the slots in the
Bottom Panel to lock
in place.
Lock-Tab Slots
Side Panel
Back Panel
Step 2:
Slide a Side Panel onto
the Bottom Panel then
repeat with the other.
Bottom Panel
Side Panel
Step 1:
Place Bottom Panel
on a level surface.
Bottom Panel
Lid Support (pre-assembled on panel)
Straps
2 pcs
Bolts/
Washers
4 sets
Bottom PanelLid Panel
Back PanelFront PanelSide Panels (2 pcs)
Parts Included:
Patent Pending
#DB120
120 gal Deck Box Assembly Instructions