User Manual

16
3.Settheproperimageby movingthecamerabodyandsetthefocus byturning
the lens to left or right direction.
Note
1. Vari-Focal Dome Operation Guide: Once the picture appears
on the monitor, open the cover and adjust the lens wrench to
“NEAR ←→ FAR”, get the view zoom that you desire, and then
adjust thefocus wrench of thelens to obtain the best picture.
Afteradjustment,tightenbothwrenches.
2. You may power on the ICA-525 and connect it to a monitor
template for adjust the image.
3. Duringadjustfocus,pleasetakecaresthatdon’ttouch, collision
and knock sensor.
Zoom Adjustment
Focal Adjustment
NEAR
FAR
WIDE
TELE
4.When the ICA-525 focus adjustment has been completed, use the provided L-
wrenchtofastenthetamper-resistanthousingtothemainbody.