Owner's manual

DLP
®
Projector – User’s Manual
On-Screen Display (OSD) Menu Settings
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the top of the projector to navigate
and make changes to the OSD. The following illustration shows the corresponding buttons on the re-
mote control and on the projector.
1. To open the OSD, press the Menu button.
2. There are six menus. Press the cursor
but-
ton to move through the menus.
3. Press the cursor
button to move up and
down in a menu.
4. Press
to change values for settings, and
then press Enter or
to confirm the new set-
ting.
5. Press Menu to close the OSD or leave a sub-
menu.
Note:
Depending on the video source not all items in the OSD are available. For example, the Horizon-
tal/Vertical Position items in the Setup menu can only be modified when connected to a PC. Items
that are not available cannot be accessed and are grayed out.
– 20 –