User manual

AppendixAppendix
AppendixAppendix
Appendix
TT
TT
T
rourou
rourou
rou
bleshootingbleshooting
bleshootingbleshooting
bleshooting
If you are experiencing trouble with the LCD display, refer to the following. If the
problem persists, please contact your local dealer or our service center.
Problem: No image appears on screen.Problem: No image appears on screen.
Problem: No image appears on screen.Problem: No image appears on screen.
Problem: No image appears on screen.
` Check that all the I/O and power connectors are correctly and well connected as
described in the “Installation” section.
` Make sure the pins of the connectors are not crooked or broken.
Problem: Partial image or incorrectly displayed the image.Problem: Partial image or incorrectly displayed the image.
Problem: Partial image or incorrectly displayed the image.Problem: Partial image or incorrectly displayed the image.
Problem: Partial image or incorrectly displayed the image.
` Check to see if the resolution of your computer is higher than that of the LCD
display.
` Reconfigure the resolution of your computer to make it less than or equal to
1280 x 1024.
Problem: Image has flickering vertical line bars.Problem: Image has flickering vertical line bars.
Problem: Image has flickering vertical line bars.Problem: Image has flickering vertical line bars.
Problem: Image has flickering vertical line bars.
` Use “Clock” to make an adjustment.
` Check and reconfigure the display mode of the vertical refresh rate of your graphic
card to make it compatible with the LCD display.
Problem: Image is unstable and flickeringProblem: Image is unstable and flickering
Problem: Image is unstable and flickeringProblem: Image is unstable and flickering
Problem: Image is unstable and flickering
` Use “Phase” to make an adjustment.
Problem: Image is scrollingProblem: Image is scrolling
Problem: Image is scrollingProblem: Image is scrolling
Problem: Image is scrolling
` Check and make sure the VGA signal cable (or adapter) is well connected.
` Check and reconfigure the display mode of the vertical refresh rate of your graphic
card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)Problem: Vague image (characters and graphics)
Problem: Vague image (characters and graphics)Problem: Vague image (characters and graphics)
Problem: Vague image (characters and graphics)
` Use “Clock” to make an adjustment. If this problem still exists, use “Phase” to make
an adjustment.
16