User manual

A-12
Printer Menus
5. Address Recovery
Use this option to direct the printer’s memory to go back
a certain number of addresses when an error occurs in
order to reprint the address. The options on this menu
are: A. Get Addresses; and B. Clear Memory.
A. Get Addresses
Select Get Addresses after a jam is cleared and you
want to restart printing at the point where the printer left
off just before the jam occurred.
To retrieve any address in the data buffer, press the
Enter button. The first 16 characters of the first line of
the last address printed will be displayed on the LCD.
If NONE TO RECOVER appears, there is no data in
the memory to print. Press the + or – buttons to scroll
through the addresses. When the desired address ap-
pears, press the Enter button to print that address plus
the remaining addresses in the buffer.
B. Clear Memory
Clear Memory should be selected before you start a new
batch print ing. This is required since the memory will
contain up to twenty addresses from the previous batch.
An alternative way to clear the memory is to press the +
and – buttons simultaneously.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
Using the
Main Menu
(continued)
SV61183 Book.indb A-12SV61183 Book.indb A-12 6/9/2004 9:17:03 AM6/9/2004 9:17:03 AM