User guide

ManualsBrandsPitco Frialator ManualsKitchenI8 Water Cooker Controller

Operations Manual

L20-308 Rev 1 (05/11)

IMPORTANT FOR FUTURE REFERENCE

Please complete this information and retain this manual

for the life of the equipment:

Model #: ___________________________

Serial #: ___________________________

Date Purchased: ____________________

ENGLISH

I8 Water Cooker Computer

Covering (P/N PP11375)

This manual details the operation and adjustment of the I8 Water Cooker computer developed for

the Pitco water cooker and rethermalizer products. This microprocessor control offers the latest

cooking technology, including temperature and time compensation that requires no user

adjustments for consistently cooked product. Other features include, drain valve interlock, faulty

probe detection, selectable melt cycles, beeper volume, and cook temperature. Each product key

may be programmed with cook, shake and hold times to keep pace with changing menus over time.

The target audience for this manual is the Store Manager.

Service technicians requiring more diagnostics will use L22-303 Service Manual I8 Water Cooker Computer

1234 5678

Summary of content (12 pages)

PAGE 1
Model #: ___________________________ Serial #: ___________________________ Date Purchased: ____________________ Operations Manual I8 Water Cooker Computer Covering (P/N PP11375) 1 2 3 4 5 6 0 7 8 9 This manual details the operation and adjustment of the I8 Water Cooker computer developed for the Pitco water cooker and rethermalizer products.
PAGE 2
I8 Water Cooker Computer Operations Pitco P/N PP11375 Table of Contents 1.0 2.0 3.0 4.0 2 Key Locations and Functions: 3 1.1 To turn the appliance ON: 3 1.2 To turn the appliance OFF: 3 1.3 To start a cook: 3 1.4 To cancel a cook: 3 1.5 To Check Actual and Set Temperatures: 3 1.6 To view the current Cook, Shake and Hold timer settings: 4 To enter Level 1 Programming(store manager): 4 2.1 To set the cook Temperature: 4 2.2 To change Cook, Shake and Hold timer settings: 4 2.
PAGE 3
I8 Water Cooker Computer Operations Pitco P/N PP11375 1.0 Key Locations and Functions: Program Key Key Indicators 1 2 3 Temperature Key 4 5 6 0 Product Keys 1.1 Clock Key 7 8 Key Indicators 9 8 Digit Display Product Keys To turn the appliance ON: If power is applied to the appliance(plugged in) and the control is off, the display will be blank. Turn on the control by pressing the power on/off switch located on the right side of the control to the ON position.
PAGE 4
I8 Water Cooker Computer Operations Pitco P/N PP11375 momentarily display [ACT xxx’F] (where xxx is the current vat temperature) and then return to normal operation. To view the set temperature, press the thermometer key twice. The control will momentarily display [SET xxx’F] (where xxx is the set temperature), and then return to normal operation and display either [READY], or [ACT xxx’F]. 1.
PAGE 5
I8 Water Cooker Computer Operations Pitco P/N PP11375 proceed to the next step(2.2.2) or press the program key three times to exit out of this programming option and to return to normal operation. To deactivate the cook timer on a product key, enter in a cook time of zero for this key. 2.2.2 Shake Time Shake Time is an alarm that sounds while a cook timer is running to prompt an operator to shake the product in the basket.
PAGE 6
I8 Water Cooker Computer Operations Pitco P/N PP11375 3.1 Fahrenheit or Celcius Temperature Display: This control will display temperatures in Fahrenheit(ºF).or Celsius(ºC) degrees. The default setting is degrees Fahrenheit(ºF). With the control display showing [SELECT ], press product key 1. The display will show 1 [DEGREE n] where n is the current setting, either F or C. Press the 0 key to scroll between the two options. Press the program key to save the setting.
PAGE 7
I8 Water Cooker Computer Operations Pitco P/N PP11375 3.5 Control or Timer Mode Setting: This control can operate in one of two basic modes, Control or Timer mode. The default mode setting is Control mode, and is the setting for normal operation. In this mode, the cook timers are active and the heat control outputs are enabled to control the heating of the vat. In Timer mode, the cook timers are active, but the heat control outputs are disabled.
PAGE 8
I8 Water Cooker Computer Operations Pitco P/N PP11375 4.4 Heat Failure Alarm: [HEAT] and [FAILURE] (alternating). This alarm will occur if the control does not sense a pilot flame or if the high limit switch has tripped and needs resetting. All heating and cooking functions are suspended if this alarm occurs. 4.5 System Failure Alarm: [SYSTEM]. This alarm will occur if the control detects a shorted temperature probe. All heating and cooking functions are suspended if this alarm occurs.
PAGE 9
I8 Water Cooker Computer Operations Pitco P/N PP11375 NOTES: ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________
PAGE 10
I8 Water Cooker Computer Operations Pitco P/N PP11375 NOTES: ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________
PAGE 11
I8 Water Cooker Computer Operations Pitco P/N PP11375 NOTES: ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________
PAGE 12
In the event of problems with or questions about your order, please contact the Pitco Frialator factory at (603)225-6684 Worldwide. www.pitco.com MAILING ADDRESS: In the event of problems with or questions about your equipment, please contact the Pitco Frialator Authorized Service and Parts(ASAP) covering your area, or contact Pitco at the numbers listed to the left. P.O. BOX 501, CONCORD, NH 03302-0501 SHIPPING ADDRESS: 10 FERRY ST.