Instructions / Assembly

A
B
D
D
B
E
E
C
A
parts per bracket
PREPPING THE PIPE
VERY IMPORTANT: These are all authentic malleable iron
and require necessary cleaning and prepping; do not skip
this step.
1. Clean and dry all the parts with gentle soap.
2. Use a lint-free rag to apply metal polish to the parts.
3. Use metal polish or clear coat paint to seal the dry pipe.
RECOMMENDED
DRILL WITH 1/4” BIT
FOR WALL ANCHOR
RECOMMENDED TOOLS
INSTALLATION INTO STUDS
1. Put shelf bracket together as shown above.
2. Mark holes on wall with flange.
3. Use anchors for the holes that are not marked on the stud, see anchor
info in below instructions.
4. Using #10 1-3/4” screws provided, drill flange into wall.
5. Attach your preferred shelf with provided wood screws
to the flanges.
INSTALLATION INTO DRYWALL
NOTE: It is recommended that you install into stud for a sturdier hold.
1. Put shelf bracket together as shown above.
2. Mark holes on wall with flange.
3. Drill 1/4” pilot holes into wall.
4. Install anchors - push anchors into the pre-drilled holes. Make sure the
anchors are pushed fully into the wall.
This may require light hammering.
5. Using #10 1-3/4” screws provided, drill flange into the wall.
6. Attach your preferred shelf with provided wood screws
to the flanges.
FITS +7” DEEP SHELVES
SCREWDRIVER
370 ANGLED RESTORE BRACKETS
THANK YOU SO MUCH FOR PURCHASING A PIPE DECOR PRODUCT. IF YOU HAVE ANY TROUBLE PUTTING YOUR KIT
TOGETHER OR MISSING PIECES PLEASE CONTACT [e-mail] FOR ANY HELP AND RETURNS.
4 brackets for 2 x 24 in shelves
6 brackets for 2 x 36 in shelves
370 24AB1
370 24AB2
370 24AB5
370 24AB6
370 24AB8
370 24AB9
370 36AB1
370 36AB2
370 36AB5
370 36AB6
370 36AB8
370 36AB9
SKUS
24 IN Shelf 36 IN Shelf
A - 1/2 IN STREET ELBOW (2PC)
B - 1/2 IN FLANGES (2pc)
C - 1/2 IN PIPE 4in
E - 1-3/4” SCREWS & ANCHORS (4pc)
D - 3/4” SCREWS (4pc)