Operating Instructions AV Receiver VSX- 924 -K/-S
CAUTION TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. D3-4-2-1-1_B1_En WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. 04 Basic Setup How to use the built-in AVNavigator................................................................................................................................36 Automatically conducting optimum sound tuning (Full Auto MCACC)......................................................................37 The Input Setup menu.............................
10 Controlling the rest of your system 14 Additional information About the Remote Setup menu.......................................................................................................................................76 Operating multiple receivers............................................................................................................................................76 Setting the remote to control other components...............................................................
Flow of settings on the receiver 9 Flow for connecting and setting the receiver 10 Basic playback (page 4 2) j The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used easily after following the procedure below to make the connections and settings.
Before you start Features............................................................................................................................................. 7 Checking what’s in the box............................................................................................................. 9 Installing the receiver....................................................................................................................... 9 Loading the batteries.......................................
01 Before you start Network Features % % ESS-24bit-DAC-equipped All channels are equipped with ESS SABRE Premier Audio DACs. The Jitter Eliminators achieve clearer sound. % % Hi-bit 24 Audio Processing % Easy setup using Advanced MCACC % Auto Phase Control Plus % Phase Control Connectivity PQLS Bit-stream % Jitterless high quality playback is possible by connecting a PQLS-compatible player with HDMI connections.
01 Before you start Playback/Processing Installation % % Multi-channel Music File playback This receiver enables multi-channel music file playback with a resolution of up to 96 kHz/24 bit. Playback of WAV and FLAC files via the front USB port and network is supported.
01 Before you start Checking what’s in the box Installing the receiver Please check that you’ve received the following supplied accessories: ! Setup microphone (cable: 5 m) ! Remote control unit ! AAA size IEC R03 dry cell batteries (to confirm system operation) x2 ! AM loop antenna ! FM wire antenna ! Power cord ! CD-ROM ! Quick start guide ! Safety Brochure ! Warranty sheet ! When installing this unit, make sure to put it on a level and stable surface.
01 Before you start Operating range of remote control unit The remote control may not work properly if: ! There are obstacles between the remote control and the receiver’s remote sensor. ! Direct sunlight or fluorescent light is shining onto the remote sensor. ! The receiver is located near a device that is emitting infrared rays. ! The receiver is operated simultaneously with another infrared remote control unit.
Controls and displays Remote control............................................................................................................................... 12 Display.............................................................................................................................................14 Front panel......................................................................................................................................
02 Controls and displays The remote has been conveniently color-coded according to component control using the following system: ! White – Receiver control, TV control ! Blue – Operation of other devices and each input (TUNER, etc.) (See pages 44, 45, 47, 48and 79.) Remote control This section explains how to operate the remote control for the receiver.
02 Controls and displays 13 Remote control LED Lights when a command is sent from the remote control. 14 SUB ZONE CONTROL buttons ! Z2 (ZONE 2) – Holding down this button (for 1.5 seconds) until the remote control LED flashes one time, the mode changes to Zone 2 operation. ! Z3 (ZONE 3) – It is not used with this receiver. ! HDZ (HDZONE) – Holding down this button (for 1.5 seconds) until the remote control LED flashes one time, the mode changes to HDZONE operation.
02 Controls and displays 8 Display 1 AUTO HDMI DIGITAL ANALOG 2 L SL XL 3 C XC LFE 45 6 DIGITAL PLUS DSD PCM R TrueHD MULTI-ZONE PQLS ALC SR DTS HD ES 96/24 S.RTRV SOUND UP MIX XR MSTR CD TUNER AUTO SURROUND STREAM DIRECT PROLOGIC x ADV.SURROUND STANDARD SP AB SLEEP 8 1 16 17 7 8 iPod 18 DVD TV BD DVR 9 10 11 12 13 TUNED RDS ATT STEREO MONO HDMI ! ! ! ! ! 14 15 dB 9 USB [2] [3] [4] 10 ATT Lights when the input signal level is lowered to reduce distortion (page 67).
02 Controls and displays 10 MCACC SETUP MIC jack Front panel Use to connect the supplied microphone (page 37). 1 2 3 4 5 6 3 7 11 SPEAKERS 8 Use to change the speaker terminal (page 71).
Connecting your equipment Connecting your equipment.......................................................................................................... 17 Rear panel....................................................................................................................................... 17 Determining the speakers’ application......................................................................................... 18 Placing the speakers....................................................
03 Connecting your equipment Connecting your equipment Note This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter explains the kinds of components you can connect to make up your home theater system. The input functions below are assigned by default to the receiver’s different input terminals. Refer to The Input Setup menu on page 39to change the assignments if other connections are used.
03 Connecting your equipment [B] 7.2 channel surround system (Front wide) Determining the speakers’ application ! Speaker System setting: Normal(SB/FW) This unit permits you to build various surround systems, in accordance with the number of speakers you have. ! Be sure to connect speakers to the front left and right channels (L and R). ! It is also possible to only connect one of the surround back speakers (SB) or neither.
03 Connecting your equipment [D] 5.2 channel surround system & Front Bi-amping connection (High quality surround) [F] 5.2 channel surround system & HDZONE connection (Multi Zone) ! Speaker System setting: HDZONE With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo playback on another component in HDZONE. (The selection of input devices is limited.
03 Connecting your equipment Placing the speakers Connecting the speakers Refer to the chart below for placement of the speakers you intend to connect. Each speaker connection on the receiver comprises a positive (+) and negative (–) terminal. Make sure to match these up with the terminals on the speakers themselves. This unit supports speakers with a nominal impedance of 6 W to 16 W.
03 Connecting your equipment Bi-amping your speakers Installing your speaker system Bi-amping is when you connect the high frequency driver and low frequency driver of your speakers to different amplifiers for better crossover performance. Your speakers must be bi-ampable to do this (having separate terminals for high and low) and the sound improvement will depend on the kind of speakers you’re using. At the very least, front left and right speakers only are necessary.
03 Connecting your equipment Bi-wiring your speakers Bi-Amping setup Your speakers can also be bi-wired if they support bi-amping. ! With these connections, the Speaker System setting makes no difference. Bi-amping connection of the front speakers for high sound quality with 5.1-channel surround sound. 1 Connect bi-amp compatible speakers to the front and surround back speaker terminals. See Bi-amping your speakers on page 21.
03 Connecting your equipment About the video converter About HDMI The video converter ensures that all video sources are output through the HDMI OUT terminal. If the TV is only connected to the receiver’s composite VIDEO MONITOR OUT jacks, all the other video devices must be connected through composite connections. If several video components are assigned to the same input function (see The Input Setup menu on page 39), the converter gives priority to HDMI, component, then composite (in that order).
03 Connecting your equipment — When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 63). After setting the ARC, some time may be required for the connected device to be recognized and the sound to be produced.
03 Connecting your equipment ! With factory default settings, video from the video cable or component cable will not be output from the HDMI terminal. To output video, you must switch video input to the device connected with the video cable or component cable and set V.CONV to ON (page 69). ! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables (page 24).
03 Connecting your equipment ! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for video signal input. Depending on the player, it may not be possible to output video signals to both HDMI and other video output (composite, etc.) simultaneously, and it may be necessary to make video output settings. Please refer to the operating instructions supplied with your player for more information.
03 Connecting your equipment ! If your set-top box is equipped with an HDMI output terminal, we recommend connecting it to the receiver’s HDMI SAT/CBL IN terminal. When doing so, also connect the receiver and TV by HDMI (see Connecting using HDMI on page 24). Connecting a satellite/cable receiver or other set-top box Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called ‘set-top boxes’.
03 Connecting your equipment Connecting other audio components Connecting additional amplifiers This receiver has both digital and analog inputs, allowing you to connect audio components for playback. When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see also The Input Setup menu on page 39).
03 Connecting your equipment Connecting external antennas Connecting AM/FM antennas To improve FM reception, connect an external FM antenna to FM UNBAL 75 W. Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Connecting external antennas on page 29).
03 Connecting your equipment Basic MULTI-ZONE setup (ZONE 2) MULTI-ZONE setup % This receiver can power up to three independent systems in separate rooms after you have made the proper MULTI-ZONE connections. Different sources can be playing in three zones at the same time or, depending on your needs, the same source can also be used.
03 Connecting your equipment MULTI-ZONE setup using HDMI terminal (HDZONE) Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE) Important Important ! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 94). ! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI Setup on page 63. % ! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 94).
03 Connecting your equipment Connecting to the network through LAN interface Connecting an iPod By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand. When connected in this way, you can play audio files stored on the components on the local network, including your computer.
03 Connecting your equipment Connecting an MHL-compatible device Connecting to a wireless LAN An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device. Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold AS-WL300 for connection. ! Use only the furnished accessory connecting cable.
03 Connecting your equipment Connecting an IR receiver Plugging in the receiver If you keep your stereo components in a closed cabinet or shelving unit, or you wish to use the sub zone remote control in another zone, you can use an optional IR receiver (such as a Niles or Xantech unit) to control your system instead of the remote sensor on the front panel of this receiver.
Basic Setup How to use the built-in AVNavigator........................................................................................... 36 Automatically conducting optimum sound tuning (Full Auto MCACC)..................................... 37 The Input Setup menu.................................................................................................................... 39 Operation Mode Setup..........................................................................................................
04 Basic Setup ! On a Mac, launch Safari and click displayed in ‘Bonjour’ on the Bookmarks bar. How to use the built-in AVNavigator The built-in AVNavigator is equipped with Wiring Navi, which allows you to perform connection of this receiver and initial settings in interactive mode. By simply following the screen prompts to connect and set the unit, highly accurate initial settings can be performed easily.
04 Basic Setup ! When using an Android device, from Google Play Store, download iControlAV5, which is a free application. After launching iControlAV5, follow the instructions on the screen. After that, on the Home screen, tap the icon. 1 Press u STANDBY/ON to switch on the receiver and your TV. Make sure that the TV’s video input is set to this receiver. 2 Connect the microphone to the MCACC SETUP MIC jack on the front panel.
04 5 Basic Setup 8 The Full Auto MCACC Setup procedure is completed and the Home Menu menu reappears automatically. Follow the instructions on-screen. Make sure the microphone is connected, and if you’re using a subwoofer, make sure it is switched on and set to a comfortable volume level. 6 Be sure to disconnect the microphone from this receiver upon completion of the Full Auto MCACC Setup.
04 Basic Setup Input function default and possible settings The Input Setup menu The terminals on the receiver generally correspond to the name of one of the input functions. If you have connected components to this receiver differently from (or in addition to) the defaults below, see The Input Setup menu on page 39to tell the receiver how you’ve connected up. The dots (k) indicate possible assignments.
04 Basic Setup Operable settings/items Operation Mode Setup This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided for users who find it difficult to master all these functions and settings. One of two settings can be selected for the Operation Mode: Expert and Basic. ! The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are connected with an HDMI cable.
04 Basic Setup About the Home Menu This receiver’s Home Menu (HOME MENU) can be used to make various settings and to check and adjust items that have been set. ! The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are connected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front panel display while performing the various operations and making settings.
Basic playback Playing a source.............................................................................................................................. 43 Playing an iPod............................................................................................................................... 44 Playing a USB device...................................................................................................................... 45 Playing an MHL-compatible device...............................
05 Basic playback Playing a source Note Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. Depending on the input to be played, the playback operation can in some cases be performed using the onscreen display. The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are connected with an HDMI cable.
05 Basic playback Playing back audio files stored on an iPod Playing an iPod To navigate songs on your iPod, you can take advantage of the GUI screen of your TV connected to this receiver. You can also control all operations for music in the front panel display of this receiver. ! Note that characters that cannot be displayed on this receiver are displayed as #. ! This feature is not available for photos on your iPod.
05 Basic playback Basic playback controls Playing a USB device This receiver’s remote control buttons can be used for basic playback of files stored on USB memory devices. ! Press iPod USB to switch the remote control to the iPod/USB operation mode. It is possible to play files using the USB interface on the front of this receiver.
05 Basic playback Category About playable file formats The USB function of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. ! With MP3, WAV, AAC, FLAC, AIFF and Apple Lossless files, when music files with the same format, sampling frequency, quantization bit number and number of channels are played successively, they are played with no gap.
05 Basic playback Listening to the radio Listening to station presets The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below. Once you are tuned to a station you can memorize the frequency for recall later-see Saving station presets on page 47for more on how to do this. 1 Press TUNER to select the tuner.
05 Basic playback Searching for RDS programs Music playback using Bluetooth wireless technology One of the most useful features of RDS is the ability to search for a particular kind of radio program. You can search for any of the program types listed above. 1 Press TUNER to select the FM band. ! RDS is only possible in the FM band. 2 Press PTY. Bluetooth wireless technology enabled device: cell phone PTY SEARCH shows in the display.
05 Basic playback Pairing with the unit (Initial registration) Listen to music on the unit from a Bluetooth capable device In order for the unit to playback music stored on a Bluetooth capable device, pairing must first be performed. Pairing should be performed when first using the unit with the Bluetooth capable device, or when the pairing data on the device has been erased for any reason. Pairing is a step required to allow communication using Bluetooth wireless technology to be carried out.
05 Basic playback Radio wave reflections Radio wave caution The radio waves received by this unit include the radio wave coming directly from the device equipped with Bluetooth wireless technology (direct wave) and waves coming from various directions due to reflections by walls, furniture and building (reflected waves). The reflected waves (due to obstacles and reflecting objects) further produce a variety of reflected waves as well as variation in reception condition depending on locations.
Listening to your system Enjoying various types of playback using the listening modes................................................. 52 Selecting MCACC presets............................................................................................................... 54 Choosing the input signal.............................................................................................................. 54 Better sound using Phase Control.................................................................
06 Listening to your system With two channel sources, you can select from: ! Pro Logic IIx MOVIE – Up to 7.1 channel sound (surround back), especially suited to movie sources ! Pro Logic IIx MUSIC – Up to 7.1 channel sound (surround back), especially suited to music sources Pro Logic IIx GAME – Up to 7.1 channel sound (surround back), especially suited to video games ! ! PRO LOGIC – 4.1 channel surround sound (sound from the surround speakers is mono) ! Pro Logic IIz HEIGHT – Up to 7.
06 Listening to your system Using the Advanced surround effects Using Stream Direct The Advanced surround effects can be used for a variety of additional surround sound effects. Most Advanced Surround modes are designed to be used with film soundtracks, but some modes are also suited for music sources. Try different settings with various soundtracks to see which you like. Use the Stream Direct modes when you want to hear the truest possible reproduction of a source.
06 Listening to your system Selecting MCACC presets Better sound using Phase Control ! Default setting: MEMORY 1 If you have calibrated your system for different listening positions, you can switch between settings to suit the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa, or playing a video game close to the TV).
Playback with NETWORK features Introduction.................................................................................................................................... 56 Playback with Network functions................................................................................................. 57 About network playback............................................................................................................... 60 About playable file formats.....................................
07 Playback with NETWORK features Using AirPlay on iPod touch, iPhone, iPad, and iTunes Introduction AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. To use AirPlay, select your receiver on your iPod touch, iPhone, iPad or in iTunes. *1 The receiver’s input will switch automatically to AirPlay when AirPlay is in use.
07 Playback with NETWORK features 2 Use i/j to select the folder, music files or Internet radio station to play back, and then press ENTER. About HTC Connect This receiver features “HTC Connect”, a simple way to enjoy music content from your HTC Connect certified smart phone. 1 HTC Connect music streaming provided on this product has been developed based on interoperability testing as defined by the HTC Connect Certification program with the HTC Connect-compatible smartphones.
07 Playback with NETWORK features About list of Internet radio Listening to Pandora Internet Radio The list of Internet radio stations on this receiver is created, edited, and managed by the vTuner database service exclusively for use with this receiver. For details about vTuner, see vTuner on page 115. (For Australian Model Only) Pandora is personalized internet radio that is designed to help you discover new music you’ll love mixed in with music you already know.
07 Playback with NETWORK features In order to use the Spotify audio stream playback function from the Spotify application About the Spotify audio stream playback function Spotify is a music streaming distribution service managed and operated by Spotify Ltd. and distributing music over the Internet. Spotify audio streams can be enjoyed using this unit and your smartphone or other mobile digital device. To use the Spotify audio stream playback function, select this unit on the Spotify application.
07 Playback with NETWORK features Disclaimer for Third Party Content About network playback Access to content provided by third parties requires a high speed internet connection and may also require account registration and a paid subscription. Third party content services may be changed, suspended, interrupted, or discontinued at any time without notice, and Pioneer disclaims any liability in connection with such occurrences.
07 Playback with NETWORK features Category About playable file formats The NETWORK feature of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. Also, the compatibility of file formats varies depending on the type of server. Check with your server to ensure the compatibility of file formats supported by your server.
Control with HDMI function About the Control with HDMI function........................................................................................ 63 Making Control with HDMI connections...................................................................................... 63 HDMI Setup..................................................................................................................................... 63 Before using synchronization........................................................
08 Control with HDMI function About the Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are possible when the component is connected to the receiver using an HDMI cable. ! The receiver’s volume can be set and the sound can be muted using the TV’s remote control. ! The receiver’s input switches over automatically when the TV’s input is changed or a Control with HDMIcompatible component is played.
08 Control with HDMI function Before using synchronization Setting the PQLS function Once you have finished all connections and settings, you must: PQLS (Precision Quartz Lock System) is a digital audio signal transfer control technology using the Control with HDMI function. It offers higher-quality audio playback by controlling audio signals from the receiver to a PQLS compatible player, etc.
08 Control with HDMI function Stream Smoother Link Using the Control with HDMI function, the receiver automatically detects whether a compressed video file is being played on the player, and if so automatically activates the Stream Smoother function. To activate the Stream Smoother Link function, make the setting below. 1 Set the HDMI Setup’s Control to ON, and set the Control Mode setting to ON. See HDMI Setup on page 63. 2 Set the STREAM (Stream Smoother) setting to AUTO.
Using other functions Setting the Audio options............................................................................................................. 67 Setting the Video options.............................................................................................................. 69 Switching the output (OUTPUT PARAMETER)............................................................................. 71 Changing the channel level while listening...................................................
09 Using other functions Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, are listed in bold. Important Setting What it does Option(s) OFF S.RTRV (Auto Sound Retriever) With the Auto Sound Retriever function, DSP processing is used to compensate for the loss of audio data upon compression, improving the sound’s sense of density and modulation.
09 Using other functions Setting What it does LFE (LFE Attenuate) Some audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. When set to the recommended value of 0 dB, the LFE is not restricted. When set to a value other than 0 dB, the LFE is restricted to the set value. When OFF is selected, the sound is not output from the LFE channel.
09 Using other functions Setting the Video options There are a number of additional picture settings you can make using the VIDEO PARAMETER menu. The defaults, if not stated, are listed in bold. Important ! When MAIN/HDZONE is set to HDZONE, the VIDEO PARAMETER menu setting only affects the HDMI OUT 1 terminal signal. Also, when HDZONE is set to ON, VIDEO PARAMETER cannot be set (does not work).
09 Setting Using other functions What it does Option(s) Setting DETAIL c What it does Option(s) Adjusts saturation from dull to bright. Adjusts how sharp edges appear. c 0 to +8 d Default: 0 c CHROMA (Chroma Level) d (The image is only an example for checking the effect.) 0 c –6 to +6 d Default: 0 Adjusts the overall brightness. d (The image is only an example for checking the effect.
09 Using other functions Switching the HDMI output Switching the output (OUTPUT PARAMETER) You can press OUT P. to switch the output of speaker terminals or HDMI terminals to be played. Set which terminal to use when outputting video and audio signals from the HDMI output terminals. The HDMI OUT 1 terminal is compatible with the Control with HDMI function. Switching the speaker terminals 1 Press OUT P..
09 Using other functions ZONE 2 remote controls Using the MULTI-ZONE controls Before operation, hold down Z2 on the remote control (for 1.5 seconds) until the remote control LED flashes one time. The following table shows the possible ZONE 2 remote controls: The following steps use the front panel controls to adjust the sub zone volume and select sources. See ZONE 2 remote controls and HDZONE remote controls on page 72.
09 Using other functions Network settings from a web browser Checking your system settings Network settings and Pandora account settings can be made using the browser on a computer connected to the same LAN as the receiver. Use the status display screen to check your current settings for features such as surround back channel processing and your current MCACC preset. 1 Press u STANDBY/ON to switch on the receiver. 1 Press STATUS. 2 Turn on the computer’s power and launch the Internet browser.
09 Using other functions Resetting the system Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Set MULTI-ZONE to MULTI ZONE OFF. ! Disconnect the iPod and USB memory device from the receiver beforehand. ! Set the Control with HDMI to OFF (see HDMI Setup on page 63).
Controlling the rest of your system About the Remote Setup menu..................................................................................................... 76 Operating multiple receivers......................................................................................................... 76 Setting the remote to control other components....................................................................... 76 Selecting preset codes directly.......................................................
10 Controlling the rest of your system About the Remote Setup menu Setting the remote to control other components The Remote Setup mode is set by pressing the number button while pressing RCU SETUP. The different items on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the respective items. Most components can be assigned to one of the input function buttons (such as DVD or CD) using the component’s manufacturer preset code stored in the remote.
10 Controlling the rest of your system 3 Point the two remote controls towards each other, then press the button that will be doing the learning on this receiver’s remote control. Programming signals from other remote controls The LED flashes once, then stops flashing, remaining lit. ! The remote controls should be 3 cm apart.
10 Controlling the rest of your system Erasing all learnt settings that are in one input function Resetting the remote control settings This operation erases all the operational settings of other devices that have been programmed in one input function, and restores the factory default. This function is handy for erasing all data programmed for devices no longer being used. Use this procedure to reset all the remote control’s settings to the factory default.
10 Controlling the rest of your system TV and Audio/Video components Controlling components This remote control can control components after entering the proper codes (see Setting the remote to control other components on page 76for more on this). Use the input function buttons to select the component.
10 Controlling the rest of your system Audio/Video components TV (Projector) Button(s) LD CD/CD-R/SACD MD/DAT TAPE Button(s) TV (Projector) u SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF u SOURCE POWER ON Number buttons numerics numerics numerics — 1 MOVIE CLEAR 2 STANDARD 3 DYNAMIC 4 USER1 5 USER2 6 USER3 7 COLOR+ 8 SHARP+ CLR +10 >10/CLEAR CLEAR ENTER (CLASS) ENTER DISC/ENTER OPEN/CLOSE ENTER — MSc TOP MENU — — LEGATO LINK —
The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu..................................................... 82 Automatic MCACC (Expert)........................................................................................................... 82 Manual MCACC setup.................................................................................................................... 84 Checking MCACC Data......................................................................................
11 The Advanced MCACC menu 2 Making receiver settings from the Advanced MCACC menu The Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a studio easily and with high precision.
11 3 The Advanced MCACC menu 8 Connect the microphone to the MCACC SETUP MIC jack on the front panel.
11 The Advanced MCACC menu 3 Manual MCACC setup You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system. Before making these settings, you should have already completed Automatically conducting optimum sound tuning (Full Auto MCACC) on page 37. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers). 4 Fine Speaker Distance CAUTION ! Default setting: 3.
11 The Advanced MCACC menu Standing Wave Acoustic Calibration EQ Professional ! Default setting: ON/ATT 0.0dB (all filters) Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area. This can have a negative effect on the overall sound, especially at certain lower frequencies.
11 3 The Advanced MCACC menu If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START. Checking MCACC Data The following options determine how the reverb characteristics of your listening area are displayed in Reverb View: ! EQ OFF – You will see the reverb characteristics of your listening area without the equalization performed by this receiver (before calibration).
11 The Advanced MCACC menu 3 Speaker Distance Use this to display the distance from the different channels to the listening position. See Speaker Distance on page 90for more on this. 1 Select ‘Speaker Distance’ from the MCACC Data Check menu. 2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check. The distance from the various channels set at the selected MCACC preset is displayed. ‘---’ is displayed for channels that are not connected.
The System Setup and Other Setup menus Making receiver settings from the System Setup menu............................................................. 89 Manual speaker setup.................................................................................................................... 89 Network Setup menu..................................................................................................................... 91 Checking the Network Information..............................................
12 The System Setup and Other Setup menus ! Speaker Distance – Specifies the distance of your speakers from the listening position (page 90). ! X-Curve – Adjusts the tonal balance of your speaker system for movie soundtracks (page 90). Making receiver settings from the System Setup menu The following section describes how to change the speaker-related settings manually and make various other settings (input selection, OSD language selection, etc.).
12 The System Setup and Other Setup menus ! Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a subwoofer. Select SMALL to send the bass frequencies to the subwoofer. ! Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the front speakers).
12 The System Setup and Other Setup menus Proxy Hostname/Proxy Port Network Setup menu This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address of your proxy server in the ‘Proxy Hostname’ field. Also, enter the port number of your proxy server in the ‘Proxy Port’ field. Make the settings for connecting the receiver to the Internet and using the network functions.
12 The System Setup and Other Setup menus Parental Lock Notes Set restrictions for using Internet services. Also set the password accompanying the usage restrictions. ! Upon shipment from the factory, the password is set to “0000”. ! This is only valid for MHL-compatible devices supporting this function. ! When the power is on, the MHL-compatible device is charged. (This receiver supports charging of devices up to 0.9 A.
12 The System Setup and Other Setup menus ! If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB memory device. If there are any old downloaded files or downloaded files for other models on the USB memory device, delete them. http://www.pioneer.
12 The System Setup and Other Setup menus ZONE Setup On Screen Display Setup Switches the sub-zone setting. 1 Select ‘ZONE Setup’ from the Other Setup menu. 2 Select ‘MAIN/HDZONE’, then press ENTER. When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over the video output on the display. This status display can be turned off by switching this setting to OFF. The setting can be made for the main zone and HDZONE, respectively.
12 The System Setup and Other Setup menus Making network settings using Safari Using Safari to set a friendly name 1 1 Launch Safari on your computer. Launch Safari on your computer. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark.
12 The System Setup and Other Setup menus 7 Using Safari to update the firmware 1 The firmware upload status screen is displayed. “The upload process finished successfully.” will be shown when the update is completed. Once updating is completed, the receiver’s power automatically turns off. Launch Safari on your computer. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark.
FAQ Troubleshooting............................................................................................................................. 98 Power...............................................................................................................................................98 No sound......................................................................................................................................... 98 Other audio problems............................................
13 FAQ Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work.
13 FAQ Symptom Remedy No sound from front height or front wide speakers. Check that the front height or front wide speakers are set to LARGE or SMALL, and the surround speakers are not set to NO (see Speaker Setting on page 89). Other audio problems When Speaker System is set to Normal(SB/FH) or Normal(SB/FW) and SP: SB ON is selected with the OUT P. button, no sound will be output from the front height or front wide speakers.
13 FAQ Symptom Remedy The volume level drops automatically. The temperature within the unit has exceeded the allowable value. Try moving the unit for better ventilation (see Installing the receiver on page 9). Volume seems different when input is switched. Set the Channel Level setting to ALL, then adjust the volume of the respective input sources (see Input Volume Absorber on page 71). Video Symptom Remedy No image is output when an input is selected.
13 FAQ Settings Professional Calibration EQ graphical output Symptom Remedy Symptom Remedy The Auto MCACC Setup continually shows an error. The ambient noise level may be too high. Keep the noise level in the room as low as possible (see also Problems when using the Auto MCACC Setup on page 38). If the noise level cannot be kept low enough, you will have to set up the surround sound manually (page 89). The reverb characteristics graph after EQ calibration does not appear entirely flat.
13 FAQ Symptom Remedy When playing a disc with the listening mode set to Auto Surround or Pro Logic II or DTS Neo:X ALC, does not appear on the receiver. Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 54). During playback of DVD-Audio, the display shows PCM. This will occur when playing DVD-Audio material over the HDMI connection. This is not a malfunction.
13 FAQ Symptom Remedy HDCP ERROR shows in the display. Check whether or not the connected component is compatible with HDCP. If it is not compatible with HDCP, reconnect the source device using a different type of connection (component or composite). Some components that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video, this is not a malfunction. Synchronized operation not possible using Control with HDMI function.
13 FAQ USB interface Symptom iPod Cause The folders/files stored on a The folders/files are currently stored USB memory device are not in a region other than the FAT (File displayed. Allocation Table) region. A USB memory device is not recognized. Remedy Symptom Cause Remedy Store the folders/files in the FAT region. iPod is not recognized. This receiver recognizes the iPod as a fraud. Switch off and on again this receiver. Reconnect the iPod with the receiver switched off.
13 FAQ Symptom Cause Remedy Symptom Cause Remedy The audio files stored on components on the network, such as a PC, cannot be played back. Windows Media Player 11 or Windows Media Player 12 is not currently installed on your PC. Install Windows Media Player 11 or Windows Media Player 12 on your PC (page 56). Audio playback is undesirably stopped or disturbed. The audio file currently being played back was not recorded in a format playable on this receiver.
13 FAQ Symptom Cause Remedy The sound of the Spotify audio stream is not produced. — Check whether this unit is selected on the Spotify application. Wireless LAN Network cannot be accessed via wireless LAN. Wireless LAN converter’s power is not on. ! Check that the USB cable connecting the wireless LAN converter to the receiver’s DC OUTPUT for WIRELESS LAN terminal is properly connected. Check that contents are playing on the Spotify application.
Additional information Surround sound formats..............................................................................................................108 SABRE DACTM.................................................................................................................................108 About HDMI..................................................................................................................................108 HTC Connect......................................................
14 Additional information Surround sound formats SABRE DACTM Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. SABRE DACTM and the logo are trademarks of ESS Technology, Inc.
14 Additional information About iPod About aptX AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPod touch (1st through 5th generation) and iPod nano (3rd through 7th generation).
14 Additional information Software license notice Auto Surround, ALC and Stream Direct with different input signal formats About Apple Lossless Audio Codec The following charts show what you will hear with different input signal formats, depending on the Stream Direct mode (see Using Stream Direct on page 53) you have selected. Copyright © 2011 Apple Inc. All rights reserved. Licensed under the Apache License, Version 2.0. You may obtain a copy of the License at http://www.apache.
14 Additional information If the subwoofer must be installed near a wall, place it at an angle so that it is not parallel to the wall surface. This can help reduce any sympathetic vibrations, but depending on the shape of the room this could result in standing waves. However, even if standing waves are generated, their influence on the sound quality can be prevented using the Auto MCACC’s standing wave control function (page 85).
14 Additional information About messages displayed when using network functions Important information regarding the HDMI connection Refer to the following information when you come up with a status message while operating the Network functions. There are cases where you may not be able to route HDMI signals through this receiver (this depends on the HDMI-equipped component you are connecting-check with the manufacturer for HDMI compatibility information).
14 Additional information Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: PIONEER HOME ELECTRONICS CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan Hereby, Pioneer, declares that this [*] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
14 Additional information Decoding Glossary A technology for converting digital signals that have been compressed upon recording by a digital signal processing circuit, etc., into the original signals. The term “decoding” (or “matrix decoding”) is also used for the technology which converts 2-channel sound sources into multiple channels or expands 5.1-channel signals into 6.1 or 7.1 channels. Audio formats/Decoding Dolby The Dolby technologies are explained below. See http://www.dolby.
14 Additional information ! Windows Media Player 11 (for Windows XP or Windows Vista) ! Windows Media Player 12 (for Windows 7 or Windows 8) For more information check the official Microsoft website. HDMI Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are possible when the component is connected to the receiver using an HDMI cable. ! The receiver’s volume can be set and the sound can be muted using the TV’s remote control.
14 Additional information vTuner Features index See Listening to Internet radio stations on page 57. DLNA Operation Mode See Operation Mode Setup on page 40. See About network playback on page 60. AVNavigator AirPlay See How to use the built-in AVNavigator on page 36. See Using AirPlay on iPod touch, iPhone, iPad, and iTunes on page 56. ECO MODE 1, 2 Wireless LAN See Using the Advanced surround effects on page 53. See Connecting to a wireless LAN on page 33.
14 Additional information Network Section Specifications LAN terminal................................................................................................................................10 BASE-T/100 BASE-TX Miscellaneous Audio Section Rated power output (1 kHz, 6 W, 1 %) Front, Center, Surround, Surround back.....................................................................................150 W per channel Rated power output (20 Hz to 20 kHz, 8 W, 0.
14 Additional information Elman 0144 Elta 0142, 0154, 0228 Emerson 0125, 0138, 0155 Epson 0216 Erres 0149, 0152, 0155 ESC 0229 Etron 0142 Eurofeel 0229, 0140 Euroline 0152 Euroman 0125, 0140, 0141, 0149, 0155, 0228, 0229 Europhon 0141, 0144, 0149, 0155, 0228, 0229 Expert 0156 Exquisit 0155 Fenner 0142, 0154 Ferguson 0148, 0152, 0153, 0157 Fidelity 0141, 0145, 0155, 0228 Filsai 0229 Finlandia 0145 Finlux 0132, 0138, 0141, 0144, 0149, 0152, 0155, 0229 Firstline 0141, 0142, 0149, 0154, 0155, 0228, 0229 Fishe
14 Naonis 0145 NEC 0147, 0229 Neckermann 0125, 0138, 0141, 0145, 0149, 0150, 0152, 0155, 0229 NEI 0149, 0152, 0155 Neufunk 0154, 0155 New Tech 0142, 0149, 0154, 0155, 0229 New World 0143 Nicamagic 0141, 0228 Nikkai 0140, 0141, 0143, 0149, 0152, 0154, 0155, 0228, 0229 Nobliko 0132, 0141, 0144, 0228 Nokia 0146 Nordic 0229 Nordmende 0138, 0146, 0148, 0149 Nordvision 0152 Novatronic 0155 Oceanic 0146, 0156 Okano 0125, 0150, 0155 ONCEAS 0141 Opera 0155 Orbit 0149, 0155 Orion 0142, 0149, 0152, 0154, 0155, 0194 Or
14 Supervision 2181 Synn 2181 Tatung 2130, 2188 TCM 2097 Teac 2162, 2177, 2181 Tec 2186 Technika 2188 Additional information Telefunken 2183 Tensai 2188 Tevion 2097, 2181, 2187 Thomson 2098, 2112, 2155, 2159 Tokai 2178, 2186 Toshiba 2102, 2156, 2168, 2169, 2172 TRANScontinents 2189 Trio 2188 TruVision 2185 Wharfedale 2180, 2181 Xbox 2098 Xlogic 2181, 2188 XMS 2188 Yamada 2189 Yamaha 2106 Yamakawa 2178, 2189 Yukai 2101, 2147 Interbuy 1038, 1050 Interfunk 1039 Intervision 1033, 1051 Irradio 1038, 1040, 1
14 Additional information ID Digital 6241 ILLUSION sat 6247 Imperial 6222, 6216, 6223, 6238, 6232 Ingelen 6213, 6261 Inno Hit 6228 International 6256 Interstar 6196 Intervision 6255 Inves 6268 iotronic 6244 ITT Nokia 6176, 6207 Jaeger 6238 K-SAT 6180 Kamm 6180 Kaon 6251 KaTelco 6267 Kathrein 6177, 6214, 6213, 6262, 6200, 6180, 6179, 6272, 6183 Kendo 6252 Kenwood 6220 Key West 6256 Kiton 6213 KR 6200 Kreiling 6213, 6194, 6228 Kreiselmeyer 6177 Kyostar 6200 L&S Electronic 6256, 6238 Labgear 6195 LaSAT 6177,
14 Starland 6180 Starlite 6214 Stream 6212 Stream System 6251 Strong 6220, 6228, 6256, 6200, 6180, 6245, 6217, 6239 Sumin 6199 Sunny 6251 Sunsat 6180 Sunstar 6174, 6256 SuperMax 6193 Supratech 6244 Systec 6238 Tantec 6176 Targa 6191 Tatung 6176 TBoston 6227, 6245 Tecatel 6233 Technical 6228 Technika 6217, 6232, 6218 TechniSat 6213, 6261, 6176, 6236, 6215, 6222, 6216, 6223 Technomate 6250 Technosat 6193 Technosonic 6254, 6232 Technotrend 6232 Technowelt 6256, 6255 Additional information Techwood 6213, 6217
PIONEER HOME ELECTRONICS CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.