> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Basic Manual VSX-1131 AV Receiver Hookup Step1: Choose your Speaker Layout ...................................... 3 Step2: Connect the Speakers ................................................. 9 Step3: Connect the TV ......................................................... 12 Step4: Connect the AV Components .................................... 14 Step5: Connect Other Cables ............................
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix What's in the box 1. Main unit 2. Remote controller (RC-914R) ×1, Batteries (AAA/R03) ×2 3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1 6. Power cord ×1 Main features This unit is connected between your TV and your AV components. To play, select the source with the input selector. You can connect 7.1ch of speakers to this unit, with 7ch at 170 W (6 ohms, 1 kHz, 0.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step1: Choose your Speaker Layout For 5.1-Channel System This is a 5.1-channel system that is the basic surround system. Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix For 7.1-Channel System (with Surround Back Speakers) This is a system with surround back speakers added to the basic 5.1-channel system. The connection of surround back speakers improves the sense of envelopment and connectivity of sound created by the back sound field and provides a more real sound field.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix For 7.1-Channel System (with Height Speaker-A) This is a basic 5.1-channel system with the addition of height speakers, either as front high speakers or rear high speakers. Select which speakers to setup according to the environment of the room. You can select the Dolby Atmos listening mode (5.1.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix For 7.1-Channel System (with Height Speaker-B) This is a basic 5.1-channel system using ceiling speakers, for example, with the addition of height speakers, either as top front speakers, top middle speakers, or top rear speakers. Select which speakers to setup according to the environment of the room. You can select the Dolby Atmos listening mode (5.1.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix For 7.1-Channel System (with Height Speakers-C) This is a basic 5.1-channel system that using Dolby enabled speakers, with the addition of height speakers, either as Dolby enabled speakers (front) or Dolby enabled speakers (surround) or Dolby enabled speakers (surround back). Select which speakers to setup according to the environment of the room.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix For Bi-Amping the Speakers It is possible to connect front speakers supporting Bi-Amping to improve quality of the bass and treble. The maximum number of channels available with this connection is 5.1 because Bi-Amping speakers require one amplifier for the tweeter jacks and one amplifier for the woofer jacks. The effects and placements for speakers are the same as the 5.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step2: Connect the Speakers in case of: Pages 3 to 4 Connect 123456 for a 5.1-channel system. With a 7.1-Channel System (with Surround Back Speakers), also connect 7 and 8. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER jacks. With this connection, you can connect one more set of front speakers to use as a Speaker B System.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix in case of: Pages 5 to 7 Connect 1234569:. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER jacks. 0 Apart from these connections, you can also connect surround back speakers 7 and 8. However, you can only output audio from one set of 78 or 9: at a time. When both are connected, you can select which speakers to prioritize with AV Adjust (P25).
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix in case of: Page 8 Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the SURROUND BACK jacks. Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. In case of Bi-Amping connection, refer to the instruction manual of your speakers. Up to two powered subwoofers can be connected.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step3: Connect the TV if you have: ARC TV This unit is connected between your TV and AV components. If you connect two or more AV components, you can select the video displayed on the TV and the audio output from this unit by changing the input selector. Shown here are the connections for a TV that supports the ARC (Audio Return Channel) feature.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix if you have: Non-ARC TV This unit is connected between your TV and AV components. If you connect two or more AV components, you can select the video displayed on the TV and the audio output from this unit by changing the input selector. This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step4: Connect the AV Components if you have: HDMI AV Components This is an example of connection with an AV component that has an HDMI jack.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix if you have: Non-HDMI AV Components 2 OR 3 1 This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix if you have: Audio Components Example of a connection with an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. 0 If the turntable has a built-in audio equalizer, connect it to another AUDIO IN jack.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Multi-zone Connection You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" input selector.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step5: Connect Other Cables AM Antenna Hookup Network Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall. Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step6: Power On & Initial Setup Initial Setup starts automatically Once all connections are complete, change the TV's input to the input for this unit, inset batteries in the remote controller, and press Í to turn the power on.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix HDMI Setup 2. Source Connection Check that each input source is connected correctly. Follow the guidance, select the input you want to confirm, start play of the selected player, and confirm that the images appear on the TV and that sound is played. 3. Network Connection Set up Wi-Fi connection with an access point such as a wireless LAN router.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Basic Playback AV Component Playback a f b e d c 1. Switch the input on the TV to that assigned to the unit. 2. Press the input selector (a) on the remote controller with the same name as the jack to which you connected the player to switch the input. For example, press BD/DVD to play the player connected to the BD/DVD jack. Press TV to listen the TV's sound.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Network Functions Network Services USB 1. Switch the input on the TV to that assigned to the unit. 2. Press NET to display the network service list screen. Play music files on a USB storage device. 0 Operation cannot be guaranteed for all USB storage devices. 1. Switch the input on the TV to that assigned to the unit. 2.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix iPhone AirPlay BLUETOOTH® Playback You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit. 0 Update the OS version on your iOS device to the latest version. 1. Connect the iOS device to the access point. 2. Press NET. 3.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Others Listening To the Radio a b c d e 1. Press TUNER (a) on the remote controller repeatedly to select either "AM" or "FM" on the display. 2. Press MODE (c) on the remote controller, so that the "TunMode: Auto" is displayed on the display. 3. When you press the / cursor (b) buttons on the remote controller, automatic tuning starts, and searching stops when a station is found.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix the AM/FM radio. 4. Volume adjustment is done on the pre-main amplifier for the separate room when connected via ZONE 2 LINE OUT. When outputting from ZONE speakers, adjust with VOL+/– on the remote controller. To control on the main unit, press ZONE 2-CONTROL and adjust with the MASTER VOLUME control within 8 seconds. 0 If ZONE 2 is on, power consumption during standby becomes larger than normal.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Front Panel Part Names 1 2 15 16 17 1. INPUT SELECTOR dial: Switch the input to be played. 2. MCACC indicator: This lights when you have enabled the speaker calibration made with MCACC. 3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the display off. 4. DIMMER button: Switches the brightness of the display. 5.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Rear Panel 1 2 3 4 5 6 7 8 9 8 90° 180° 9 (Taiwanese models) 10 11 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. ANTENNA AM LOOP/FM 75Ω terminal: The supplied antennas are connected. 3. VIDEO IN jacks: Input the AV component video signals with an analog video cable. 4.
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Remote Controller 1 2 3 4 12 5 6 13 7 8 Display 1. Í button: Turns the unit on or into standby mode. 2. Input selector buttons: Select the input to be played. Use the buttons in 3 to select "STRM BOX", "AUX", or "PHONO". 3. 21 button: Input source played switches each time you press one of these buttons. 4. (AV ADJUST) button: You can perform common settings on the TV screen. 5.
License and Trademark Information license. Other trademarks and trade names are those of their respective owners. ® BLUETOOTH 文字標誌和圖形標誌為 Bluetooth SIG, Inc. 所有的註冊商標，且 Onkyo Corporation 在授權下使用任何該等標記。其他商標和商名為各自所有者 的商標和商名。 Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
DISCLAIMER Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”). We have no control over the nature, content and availability of those services. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.
2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A. Tel: 1-201-785-2600 Tel: 1-844-679-5350 Hanns-Martin-Schleyer-Straße 35, 47877 Willich, Germany Tel: +49(0)2154 913222 Anteros Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QQ United Kingdom Tel: +44(0)208 836 3612 6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE Tel: +33(0)969 368 050 Корпорация О энд Пи 2-3-12, Яэсу, Чуо-ку, г.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Advanced Manual VSX-1131 AV Receiver Specifications General Specifications............................................................. 2 About HDMI ............................................................................. 4 Settings System Setup .......................................................................... 5 MCACC ...................................................................
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix General Specifications ■ Amplifier Section 2 Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 2020,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power (＊) (6 ohms, 1 kHz THD 0.9%) 170 W per channel ＊ Reference output for each speakers.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix 1490 W (Taiwanese) Dimensions (W × H × D) 435 mm × 173 mm × 370.5 mm 17-1/8" × 6-13/16" × 14-9/16" Weight 10.0 kg (22.0 lbs.) Composite input 480i/576i • The output from the HDMI OUT jack to the TV is the same resolution as the input. When using a TV that supports 4K, 1080p HDMI video signals can also be output as 4K.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix About HDMI ■ Compatible functions HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Bluray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Input/Output Assign System Setup The unit allows you to configure advanced settings to provide you with an even better experience. Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings. on the remote controller to display the Home screen, then select System Setup Press with the cursors on the remote controller and press ENTER.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details Impose OSD On Set whether or not to display the information on the TV when the volume is adjusted or input is changed, for example. "On": OSD displayed on the TV "Off": OSD not displayed on the TV • OSD may not be displayed depending on the input signal even if "On" is selected.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Video Input ■ Digital Audio Input You can change input assignment between the input selectors and COMPONENT VIDEO IN jack and the VIDEO IN 1 and 2 jacks. If you do not assign a jack, select "-----". You can change input assignment between the input selectors and DIGITAL IN COAXIAL/ OPTICAL 1 to 2 jacks. If you do not assign a jack, select "-----".
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix 8 ■ Analog Audio Input ■ Input Skip You can change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "-----". You can skip inputs to which nothing is connected when selecting them with the INPUT SELECTOR dial on the main unit or with the / input selectors on the remote controller.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Speaker You can make changes to the connection environment of the speakers and change the volume level. Settings are automatically configured if you use Full Auto MCACC. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. Setting Item Default Value Setting Details Speaker B No Set whether you will use the Speaker B system.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Crossover 10 Setting Item Default Value Setting Details Front Small Set the low range capabilities for each channel by setting either small or large.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Double Bass Off This can be selected only when "System Setup" "Speaker" - "Configuration" - "Subwoofer" is set to "Yes" and "Front" is set to "Large". Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix • Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you can set between 0.03 m and 9.00 m in increments of 0.03 m. 12 ■ Channel Level Setting Item Default Value Setting Details Front Left 0.0 dB Select a value between "−12.0 dB" and "＋12.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Surr Back Right 0.0 dB Select a value between "−12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. • This setting cannot be changed if "System Setup" - "Speaker" - "Configuration" - "Zone Speaker" is set to "Zone 2". Surr Back Left 0.0 dB Select a value between "−12.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Volume Audio Adjust Make advanced settings such as those related to multiplex audio or those related to the volume of this unit. Setting Item Default Value Setting Details Mute Level − dB Set the volume lowered from the listening volume when muting is on. Select a value from "− dB", "−40 dB", and "−20 dB". Volume Limit Off Set the maximum value to avoid too high volume.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Source Make settings for input sources, such as volume difference adjustments for each input selector for the connected equipment. ■ Input Volume Absorber Adjust the volume level difference between the devices connected to the unit. Select the input selector to configure. Setting Item Default Value Setting Details Input Volume Absorber 0.0 dB Select a value between "−12.0 dB" and "＋12.0 dB".
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Fixed PCM Off Select whether to fix input signals to PCM (except multi-channel PCM) when you have selected "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. Select "Off" normally.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI Standby Through Off When this is set to anything other than "Off", you can play the video and audio of an HDMI connected player on the TV even if the unit is in standby mode. Only "Auto" and "Auto(Eco)" can be selected if "HDMI CEC" is set to "On". If you select anything else, set "HDMI CEC" to "Off".
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Power Management 18 Setting Item Default Value Setting Details Sleep Timer Off Allows the unit to enter standby automatically when the specified time elapses. Select a value from "30 minutes", "60 minutes", and "90 minutes".
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Multi Zone Miscellaneous Make settings related to Multi-zone Connection, such as the volume for the separate room. Change the frequency step for the tuner, update the firmware, and perform Initial Setup, etc. ■ Zone 2 Setting Item Default Value Setting Details Volume Limit Off Set the maximum value for Zone 2 to avoid too high volume. Select "Off" or a value between "−32 dB" and "＋17 dB".
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Firmware Update Setting Item Default Value Setting Details Update Notice Enable Availability of a firmware update will be notified via network. "Enable": Notify updates "Disable": Do not notify updates Version - The current firmware version will be displayed. - Press ENTER to select when you want to update the firmware via network.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Full Auto MCACC MCACC Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings. on the remote controller to display the Home screen, then select MCACC with the Press cursors on the remote controller and press ENTER.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix height speaker. Use this screen to select whether you have connected a subwoofer and to select the type of height speaker, etc. • If you have connected a subwoofer, check the power and volume of the subwoofer. The low frequencies played by the subwoofer may not be discernible, so set its volume to at least halfway. 3.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height Left 0 dB After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "−12.0 dB" and "＋12.0 dB" with / .
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix MCACC Data Check You can check the number of speaker channels connected and the content and values you have set for each of the speaker settings. ■ Speaker Setting You can check the number of speaker channels connected and the large and small settings you have set for the low range reproduction capabilities for each of the speakers.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Network Network/Bluetooth Make settings related to network connections and BLUETOOTH . Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings. on the remote controller to display the Home screen, select Network/Bluetooth Press with the cursors on the remote controller, then press ENTER.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix 26 Setting Item Default Value Setting Details Setting Item Friendly Name Pioneer VSX1131 XXX Change the device name for this unit which is shown on other devices connected to the network to an easily recognized name. 1. Press ENTER to display the Edit screen. 2. Select a character or symbol with the cursors and press ENTER. Repeat it to input 31 or less characters.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix • Wait for a while if "Network" cannot be selected. It will appear when the network feature is started. Bluetooth Setting Item Default Value Setting Details Bluetooth On Select whether or not to use the BLUETOOTH function. "On": Enables connection with a BLUETOOTH enabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Tone Bass : Enhance or moderate the bass range of the speaker. AV Adjust Treble : Enhance or moderate the treble range of the speaker. You can quickly adjust settings you frequently use, such as tone adjustments, etc. Operation: You can make the settings on the TV screen while playing on the remote controller to display something. Press the AV Adjust menu.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix • It cannot be set if the listening mode is Direct or Pure Direct. • The setting cannot be used in the following cases.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Firmware Update About Firmware Update There are two methods for updating the firmware: via network and via USB. Use the one that best suits your environment. • For the latest information on updates, visit the our company's website. There is no need to update the firmware on this unit if there is no update available. • Before updating, make sure that the speaker setup microphone is not connected.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix System Setup • If "Firmware Update" is grayed out and cannot be selected, wait for a while until it starts up. • You will not be able to select "Update via NET" if there is nothing to update. 3. Press ENTER with "Update" selected to start update. • During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of the unit.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix • Make sure to copy the unzipped files. 4. Connect the USB storage device to the USB port of the unit. • If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it. • If the USB storage device has been partitioned, each section will be treated as an independent device. on the remote controller. 5.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ AUTO/DIRECT button Selecting Listening Modes You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". Press repeatedly and the listening modes suited to the input signal are switched between "Auto Surround", "Direct", and "Pure Direct".
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Listening Mode Effects ■ Updating of listening modes We plan to provide support for the DTS:X audio format through firmware updates for this unit. This means that the selectable listening modes depend on the version of firmware. On firmware version before DTS:X support • You can select Neo:6 Cinema and Neo:6 Music. On firmware version after DTS:X support • You can select DTS:X and DTS Neural:X.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix The DTS audio format is a multi-channel digital format developed by DTS, Inc. This format is an optional audio format on DVD-Video and a standard on Blu-ray Discs. It enables recording of 5.1 channels; two front channels, a center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer).
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Ext�Mono (Extended Mono) In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room. ■ Ext�Stereo (Extended Stereo) Ideal for background music, this mode fills the entire listening area with stereo sound from the front, surround, and surround back speakers.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Selectable listening modes Selectable Listening Modes Input Format Listening Mode Analog Stereo Input Format Listening Mode PCM Music files (except DSD/ Dolby TrueHD) Stereo Mono You can select a variety of listening modes to suit the audio format of the signal being input. • The Stereo mode can be selected with any audio format.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Stereo DSD Stereo Dolby Atmos • You can select the Dolby Digital Plus or Dolby TrueHD listening modes if a surround back speaker or height speaker is not connected.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby D Stereo Dolby D+ Stereo Dolby TrueHD Stereo Dolby D Dolby D+ 1 2 Dolby Surround Dolby Surround Neo:6 Cinema Neo:6 Cinema Neo:6 Cinema 3 Neo:6 Music 3 DTS Neural:X Classical Classical 4 Action Unplugged 4 Ent.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Stereo DTS 96/24 Stereo DTS Express Stereo DTS DTS 96/24 1 2 Dolby Surround Dolby Surround Neo:6 Cinema Neo:6 Cinema Neo:6 Cinema 3 Neo:6 Music 3 DTS Neural:X Classical Classical 4 Action Unplugged 4 Ent.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Stereo DTS-HD MSTR Stereo DTS-ES Stereo DTS-HD HR DTS-HD MSTR DTS Dolby Surround Dolby Surround ES Matrix Neo:6 Cinema Neo:6 Cinema ES Discrete 1 2 Neo:6 Music 1 2 3 Neo:6 Music 3 DTS Neural:X DTS Neural:X Classical Classical Drama 4 Action Ent.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Input Format Listening Mode DTS:X Stereo DTS:X Classical 1 Unplugged Ent.Show Drama 1 1 1 AdvancedGame Action 1 1 Rock/Pop Sports 1 1 Ext.Stereo 2 Ext.Mono 2 F.S.Surround 1 2 42 Surround speakers or height speakers need to be installed. A center speaker, surround speakers, or height speakers need to be installed.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix LINKS AM/FM radio Tuning into a Radio Station ■ Tuning Automatically 1. Press TUNER on the remote controller several times to select either "AM" or "FM". 2. Press MODE on the remote controller so that "TunMode:Auto" appears on the display. 3. Press the cursors / on the remote controller to start automatic tuning. • Searching automatically stops when a station is found.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Using RDS (European, Australian and Asian models) RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. In regions using RDS, the radio station name is displayed when you tune into a radio station broadcasting program information. When you press on the remote controller in this state, you can use the following functions.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Operations with the remote controller: USB Storage Device : Repeat One Track 4 : Shuffle 1 ■ USB Storage Device Requirements ■ Playing Back Play music files on a USB storage device. 1. Switch the input on the TV to that assigned to the unit. 2. Plug your USB storage device with the music files into the USB port of this unit. 3. Press "USB" on the remote controller.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Supported Audio Formats For server playback and playback from a USB storage device, this unit supports the following music file formats. Note that sound files that are protected by copyright cannot be played on this unit. MP3 (�mp3/�MP3): • Supported formats: MPEG-1/MPEG-2 Audio Layer 3 • Supported sampling rates: 44.1 kHz, 48 kHz • Supported bitrates: Between 8 kbps and 320 kbps.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Operations with the remote controller: Internet Radio 2 1 TuneIn Radio With more than 70,000 radio stations and 2 million ondemand programs registered, TuneIn Radio is a service where you can enjoy music, sports and news from all over the world. ■ Icons on the display 1. Switch the input on the TV to that assigned to the unit.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix PandoraR–Getting Started (U�S�, Australia and New Zealand only) Pandora is a free, personalized Internet radio service that plays the music you know and helps you discover music you' ll love. ■ Playing Back 1. Switch the input on the TV to that assigned to the unit. have a Pandora Account" and logging in with your email and password. 5.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Operations with the remote controller: Spotify 3 ■ Icons on the display This unit supports Spotify Connect. To enable Spotify Connect, install the Spotify application on your smartphone or tablet and create a Spotify premium account. • This unit needs to be connected to the same router as the smartphone or tablet. • Refer to the following for Spotify settings: www.spotify.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Music Server Overview Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows MediaR Player 11 or 12, or NAS that are compatible with home network functionality.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix levels deep. • Depending on the media server, the unit may not recognize it, or may not be able to play its music files. 5 6 5 6 / : When the folder or file lists are not shown on one screen, you can change the screen. : This button plays the previous track. : This button lets you start repeat or random playback. Pressing this button repeatedly cycles through the repeat modes.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix from the "Play to" window on the PC. The playback screen is displayed on the TV connected to the HDMI output of the unit. If your PC is running on WindowsR 8, click "Play to", and then select this unit. 5. Adjust the volume using the volume bar on the "Play to" window. • Sometimes, the volume displayed on the remote playback window may differ from that appeared on the display of the unit.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix LINKS Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/ off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix to be made in "Full Auto MCACC" in Initial Setup. Check in "Initial Setup" in the Basic Manual. • Depending on the source and current listening mode, not much sound may be produced by the surround speakers. Select another listening mode to see if sound is output. • If you are installing surround back speakers (for compatible models only), surround speakers are required. • A maximum of 5.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ■ Images flicker • It is possible that the resolution of the player is not compatible with the TV's resolution. If you have connected the player to this unit with an HDMI cable, try changing the output resolution on the player. There also may be an improvement if you change the screen mode on the TV.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Network function • If you cannot select a network service, it will become selectable when the network function is started. It may take about a minute to start up. • When NET is blinking, this unit is not properly connected to the home network. • Try plugging/unplugging the power supply of this unit and the router, and try rebooting the router.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Wireless LAN Network • Try plugging/unplugging the power supply of wireless LAN router and the unit, check the wireless LAN router power-on status, and try reboot of the wireless LAN router. Check the following if the above does not fix the problem: ■ Cannot access wireless LAN network • The wireless LAN router setting may be switched to Manual. Return the setting to Auto. • Try the manual set-up.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix LINKS Reference Information Radio Wave Caution 58 This unit uses radio waves in the 2.4 GHz and 5GHz frequency bands. There are nations and regions where the use of particular 5 GHz bands are prohibited outdoors, so do not use this unit outside in those places. 2.4 GHz radio waves are used by a variety of devices, as shown in lists 1 and 2 below. 1. Devices which use a 2.
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Radio Wave Reflections Precautions The radio waves received by the AV receiver include the radio wave coming directly from the devices and waves coming from various directions due to reflections by walls, furniture and building (reflected waves).
2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A. Tel: 1-201-785-2600 Tel: 1-844-679-5350 Hanns-Martin-Schleyer-Straße 35, 47877 Willich, Germany Tel: +49(0)2154 913222 Anteros Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QQ United Kingdom Tel: +44(0)208 836 3612 6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE Tel: +33(0)969 368 050 Корпорация О энд Пи 2-3-12, Яэсу, Чуо-ку, г.
