Operation Manual

6En
Displays the list of all service components/stations. Press again to search for a
service component/station alphabetically.
2 Select a service component/station from the list you selected, then press the M.C.
dial to confirm.
NOTE
You can update the service list by pressing and holding . To cancel updating, press and hold
again.
To store service components/stations
1 While receiving the service component/station you want to store, press and hold
one of the number buttons (1/ to 6/ ) until it stops flashing.
To retrieve stored service components/stations
1 Select the band, then press a number button (1/ to 6/ ).
The unit stores recent broadcasts in the memory automatically. The memory capacity of
thi
s unit varies depending on the bit rate of the service component/station used. The
approximate memory capacity is five minutes for 192 kbps.
To pause/resume
1 While receiving the service component/station, press and hold DISP.
To use the time shift function
1 While receiving the service component/station, press and hold BAND/ .
2 Press (skip back one minute)/ (skip forward one minute) to adjust the
playback point.
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Mi
ddle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
Presetting service components/stations
Pause/Time shift functions
Radio
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
1 Press SRC/OFF to select [RADIO].
2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
3 Press a number button (1/ to 6/ ).
NOTE
You can select a preset channel by pressing and turning the M.C. dial.
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 15).
The six strongest stations are stored on the number buttons (1/ to 6/ ).
1 After selecting the band, press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [FUNCTION], then press to confirm.
3 Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1 After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 15).
To store stations manually
1 While receiving the station you want to store, press and hold one of the number
buttons (1/ to 6/ ) until it stops flashing.
NOTE
You can select a preset channel by pressing and turning the M.C. dial. After selecting a channel,
press and hold the M.C. dial to store a station.
Receiving preset stations
Best stations memory (BSM)