Operating instructions

ManualsBrandsPioneer ManualsDVD-playersDVR-LX70D

Discover the benefits of registering your product online at

http://www.pioneer.co.uk

(or

http://www.pioneer.eu

)

HDD/DVD RECORDER

Operating Instructions

<VRB1476-A>

Published by Pioneer Corporation.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

K002_B_En

Printed in UK

00 Cover_back_WV.fm 1 ページ２００７年６月１９日　火曜日　午後１時１分

Summary of content (164 pages)

PAGE 1
00 Cover_back_WV.fm 1 ページ２００７年６月１９日火曜日午後１時１分 HDD/DVD RECORDER Operating Instructions Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu) PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.
PAGE 2
00 Safety_WV.fm 2 ページ２００７年７月１８日水曜日午後５時４７分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
PAGE 3
DVRLX70D_WV_EN.
PAGE 4
DVRLX70D_WV_EN.book 4 ページ２００７年７月６日金曜日午後２時６分 01 Contents 01 Before you start What’s in the box . . . . . . . . . . . . . . . . . . . 6 Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the remote control. . . . . . . . . . . . . . 6 Disc/content format playback compatibility . . . . . . . . . . . . . . . . . . . . . . . 7 About the internal hard disk drive . . . . . . 12 Symbols used in this manual . . . . . . . . .
PAGE 5
DVRLX70D_WV_EN.book 5 ページ２００７年７月６日金曜日 The Play Mode menu. . . . . . . . . . . . . . . . 81 Displaying and switching subtitles . . . . . 84 Switching DVD and DivX soundtracks. . . 84 Switching audio channels . . . . . . . . . . . . 85 Switching camera angles . . . . . . . . . . . . 85 Displaying disc information on-screen . . . . . . . . . . . . . . . . . . . . . . . . 85 09 Playing and recording from a DV camcorder Playing from a DV camcorder . . . . . . . . . 87 Recording from a DV camcorder . . . .
PAGE 6
DVRLX70D_WV_EN.
PAGE 7
DVRLX70D_WV_EN.book 7 ページ２００７年７月６日金曜日午後２時６分 Before you start • You can control this recorder using the remote sensor of another Pioneer component via the CONTROL IN jack on the rear panel. See Rear panel connections on page 14 for more information. Disc/content format playback compatibility Compatible media • DVD-RW ver. 1.1 / 1x / 1x to 2x, ver. 1.2 / 2x to 4x / 2x to 6x • DVD-R ver. 2.0 / 1x / 1x to 4x / 1x to 8x / 1x to 16x, ver. 2.1 / 1x to 8x / 1x to 16x • DVD+RW 1x to 2.4x / 1x to 4x / 3.
PAGE 8
DVRLX70D_WV_EN.book 01 8 ページ２００７年７月６日金曜日午後２時６分 Before you start HDD/DVD Recording and playback compatibility This recorder can play and record all widely-used DVD disc types, and additionally provides HDD functionality. The table below shows some specific compatibility differences between the different disc types.
PAGE 9
DVRLX70D_WV_EN.book 9 ページ２００７年７月６日金曜日午後２時６分 Before you start Using DVD-R DL/DVD+R DL discs DVD-R DL (Dual-Layer) and DVD+R DL (Double-Layer) discs contain two recordable layers on a single side, giving about 1.8 times the recording capacity of a conventional single-layer disc. This unit can record to both DVD-R DL and DVD+R DL discs. • If you intend to play DVD-R DL (Video mode) or DVD+R DL discs recorded on this unit on other DVD recorders/players, you must finalize them.
PAGE 10
DVRLX70D_WV_EN.book 01 10 ページ２００７年７月６日 WMA (Windows Media™ Audio) content This recorder can playback Windows Media Audio content. WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. Windows Media is a trademark of Microsoft Corporation. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
PAGE 11
DVRLX70D_WV_EN.book 11 ページ２００７年７月６日金曜日午後２時６分 Before you start Some DivX VOD content may only be playable a fixed number of times. When you load a disc containing this type of DivX VOD content, the remaining number of plays is shown on-screen and you then have the option of playing the disc (thereby using up one of the remaining plays), or stopping. If you load a disc that contains expired DivX VOD content (for example, content that has zero remaining plays), the message Rental Expired is displayed.
PAGE 12
DVRLX70D_WV_EN.book 01 12 ページ２００７年７月６日 DVB is a registered trademark of the DVB Project. About the internal hard disk drive The internal hard disk drive (HDD) is a fragile piece of equipment. When used without the proper care or in the wrong conditions, it is possible that recorded contents may be damaged or lost entirely, in some cases making even normal playback or recording impossible.
PAGE 13
DVRLX70D_WV_EN.book 13 ページ２００７年７月６日 Before you start 金曜日午後２時６分 01 Symbols used in this manual The following icons are provided to help you quickly identify which instructions you need for which kind of disc. HDD HDD DVD Any type of DVD disc (recordable or playback only), finalized or not. DVD-Video Commercially produced DVD, finalized Video mode DVD-R/-RW.
PAGE 14
DVRLX70D_WV_EN.book 02 14 ページ２００７年７月６日金曜日午後２時６分 Connections Chapter 2 Connections Rear panel connections 1 2 3 4 5 COMPONENT VIDEO OUT PB Y PR ANTENNA IN DIGITAL AUDIO OUT S-VIDEO OUTPUT AV 2 (INPUT 1/DECODER) G-LINK IN OUT ANTENNA(DIGITAL) IN HDMI OUT R AUDIO L 6 VIDEO AV 1 (RGB) – TV 7 8 CONTROL 9 10 1 ANTENNA IN (RF IN)/OUT Connect your TV antenna to the ANTENNA IN (RF IN) jack. The signal is passed through to the ANTENNA OUT jack for connection to your TV.
PAGE 15
DVRLX70D_WV_EN.book 15 ページ２００７年７月６日金曜日午後２時６分 Connections 02 Front panel connections Antenna wall outlet or indoor antenna Antenna wall outlet On the front panel there is a flip-down cover that hides more connections.
PAGE 16
DVRLX70D_WV_EN.book 02 16 ページ２００７年７月６日金曜日午後２時６分 Connections Easy connections The setup described below is a basic setup that allows you to watch and record TV programmes, and play discs. Other types of connections are explained starting on the following page. Important • These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, and you want to use the supplied audio/video cable, see Using the supplied audio/video cable below.
PAGE 17
DVRLX70D_WV_EN.book 17 ページ２００７年７月６日金曜日午後２時６分 Connections 02 1 Connect the VIDEO OUTPUT jack to a video input on your TV. Use the yellow jack of the supplied audio/ video cable for the video connection. 2 Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV. Use the red and white jacks of the supplied audio/video cable for the audio connection. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.
PAGE 18
DVRLX70D_WV_EN.book 02 18 ページ２００７年７月６日金曜日午後２時６分 Connections 1 From antenna output Satellite dish/ antenna/cable TV wall outlet To antenna input Cable/Satellite receiver Position the IR transmitter end of the G-LINK™ cable so that the IR receiver on your cable/satellite receiver will pick up the control signals (see diagram).
PAGE 19
DVRLX70D_WV_EN.book 19 ページ２００７年７月６日金曜日午後２時６分 Connections 02 Connecting an external decoder box (2) • It is not possible to watch one TV programme and record another using this setup. If you only have a decoder, connect it to this recorder and your TV as shown on this page.1 Antenna/cable TV wall outlet SCART AV connection 2 1 To antenna input From SCART AV connector Using the setup on this page you can: • Record scrambled channels received using the recorder’s built-in analog TV tuner.
PAGE 20
DVRLX70D_WV_EN.book 02 20 ページ２００７年７月６日金曜日午後２時６分 Connections 2 Use a SCART cable (not supplied) to connect the AV1 (RGB)-TV AV connector to a SCART AV connector on your TV. This enables you to watch discs. 3 Use another SCART cable to connect the AV2 (INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box. This enables you to record scrambled TV channels.
PAGE 21
DVRLX70D_WV_EN.book 21 ページ２００７年７月６日金曜日午後２時６分 Connections 02 Connecting using HDMI change them, or connect a new HDMI component. If you have an HDMI or DVI-equipped1 monitor or display2, you can connect it to this recorder using an HDMI cable3 (not supplied). Important The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio. 1 Use an HDMI cable to connect the HDMI OUT connector on this recorder to an HDMI connector on an HDMIcompatible display.
PAGE 22
02 Connecting _Up_EU.fm 02 22 ページ２００７年７月１２日 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. HDMI Control By connecting this unit to an HDMI Controlcompatible Pioneer plasma television, AV system (amplifier or AV receiver etc.
PAGE 23
DVRLX70D_WV_EN.book 23 ページ２００７年７月６日金曜日午後２時６分 Connections 02 • We cannot guarantee this unit will work with HDMI control-compatible components other than those made by Pioneer. Connecting other AV sources D.TV PLTV DivX Important OPEN/CLOSE HDD/DVD A.TV DV IN Connecting a DV camcorder You can connect a DV camcorder or DVD recorder with DV output to the front panel DV IN jack. Connecting a VCR or analog camcorder STANDBY/ON device.
PAGE 24
DVRLX70D_WV_EN.book 02 24 ページ２００７年７月６日 • Some USB devices may not work with this recorder. • When connecting a PC to this unit, make sure the power is turned off on both the PC and this unit when you connect them via USB. • We recommend connecting USB devices when this recorder is switched off (in standby). JPEG file storage devices • Digital still camera • Memory card reader (any type of memory card) • USB memory The Mass Storage Class (MSC) device should be FAT-compatible.
PAGE 25
DVRLX70D_WV_EN.book 25 ページ２００７年７月６日金曜日午後２時６分 Controls and displays 03 Chapter 3 Controls and displays Front panel 1 2 3 4 STANDBY/ON D.TV PLTV DV IN DivX COPY USB 1 9 7 HDMI COMMON INTERFACE INPUT 2 CH 8 6 OPEN/CLOSE HDD/DVD A.TV 5 10 STOP REC ONE TOUCH COPY INPUT SELECT A.TV/D.TV 11 S-VIDEO VIDEO L(MONO) R 9 AUDIO REC 12 A.TV indicator Lights when analog TV is selected. 5  OPEN/CLOSE Press to open/close the disc tray. D.
PAGE 26
DVRLX70D_WV_EN.book 03 26 ページ２００７年７月６日金曜日午後２時６分 Controls and displays 11  Press to start or restart playback.  Press to stop playback. STOP REC Press to stop recording. F ONE TOUCH COPY Press to start One Touch Copy of the currently playing title to DVD or the HDD. CH +/– Use to change channels, skip chapters/ tracks, etc. Common Interface To receive scrambled D.TV channels you will need a CA module and smart card provided by your service provider.
PAGE 27
DVRLX70D_WV_EN.book 27 ページ２００７年７月６日金曜日午後２時６分 Controls and displays 03 Display 1 2 3 4 L R 8 7 P 6 1  Lights during playback; blinks when playback is paused. 5 Recording quality indicators (page 64) XP Lights when the recording mode is set to XP (high quality). 2  Lights when copying. SP Lights when the recording mode is set to SP (standard play). 3  Lights during recording; blinks when recording is paused.
PAGE 28
DVRLX70D_WV_EN.book 28 ページ２００７年７月６日金曜日 Controls and displays 03   (page 81) Press to start reverse or forward scanning. Press again to change the speed. Remote control HDD/DVD STANDBY/ON 1 12 PREV 4 5 NEXT STOP REC INFO / / (page 81) While paused, press and hold to start slow-motion playback. Press repeatedly to change the playback speed.
PAGE 29
DVRLX70D_WV_EN.book 29 ページ２００７年７月６日金曜日午後２時６分 Controls and displays 03 • The cursor button is marked as follows in the operating instructions. ENTER ENTER ENTER 6 A.TV/D.TV Press to switch between analog TV antenna input and digital TV antenna input. The A.TV and D.TV indicators on the front panel show which is selected. 7 Colour buttons (RED, GREEN, YELLOW, BLUE) Use when an EPG screen is displayed or when tuned to a data channel of a digital broadcast.
PAGE 30
DVRLX70D_WV_EN.book 03 30 ページ２００７年７月６日 Controls and displays 22 DISPLAY (page 85) Displays/changes the on-screen information displays. 23 TEXT (pages 62, 63) Press to display Teletext information (in European countries except the UK) or to start the MHEG application display (UK only) if available during digital broadcasts.
PAGE 31
DVRLX70D_WV_EN.book 31 ページ２００７年７月６日金曜日午後２時６分 Getting started 04 Chapter 4 Getting started Switching on and setting up 4 ENTER When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output. If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.
PAGE 32
DVRLX70D_WV_EN.book 32 ページ２００７年７月６日金曜日午後２時６分 Getting started 04 • If no new channels were found a message appears asking if you want to scan again. Check the aerial connection before selecting Yes. (If you select No, skip to step 8 below.) ENTER 9 Select ‘Auto’ for automatic time setting, or ‘Manual’ to set the clock manually. If the clock was already set from a D.TV channel in step 6, this step is skipped. ENTER 8 Select the analog TV (A.
PAGE 33
DVRLX70D_WV_EN.book 33 ページ２００７年７月６日金曜日午後２時６分 Getting started 04 Use the / buttons to set your time zone. You can set this by selecting a city or a time relative to GMT. 1/2 k Setting Manual Clock Setting Line System Time Zone er Save England London ENTER 11 Select the TV screen type, ‘Wide (16:9)’ or ‘Standard (4:3)’. P p Navigator Summer Time Of f Press  then use the / buttons to select ‘On’ or ‘Off’ for summer time, then press ENTER. Select On if you are currently using summer time.
PAGE 34
DVRLX70D_WV_EN.book 34 ページ２００７年７月６日金曜日午後２時６分 Getting started 04 14 ENTER Press to continue after reading the HDD caution. k Setting In the event of HDD failure, recordings may be lost or normal playback/recording may Line not System be possible. er Save As recordings might be lost in case of a HDD P failure, we recommend to use the HDD only as temporary storage media. p Navigator Please copy recordings you want to keep to recordable DVD.
PAGE 35
DVRLX70D_WV_EN.book 35 ページ２００７年７月６日金曜日午後２時６分 Getting started GUIDE 1 Display the GUIDE Plus+ setup menu. 04 The system uses your postal code to identify which TV listings data is correct for the area in which you live, so it is important that you enter it correctly. 4 If you are using an external receiver (such as a satellite receiver) with the supplied G-LINK cable, complete this step, otherwise jump to step 5 below.
PAGE 36
DVRLX70D_WV_EN.book 04 36 ページ２００７年７月６日 • Press GUIDE to display the GUIDE Plus+ screen. • Press  to highlight the Menu bar, then use  to reach the Setup area and select Setup. • Continue setting up from the start of this step again. If your external receiver still doesn’t respond to the G-LINK controller, please call customer support and report the brand and model of your external receiver. See also GUIDE Plus+® FAQ and troubleshooting on page 49. 5 Identify the Host Channel for your country.
PAGE 37
DVRLX70D_WV_EN.book 37 ページ２００７年７月６日金曜日午後２時６分 Getting started • Even if you can’t use the EPG functions where you live, you can still set VIDEO Plus+ recordings and manual recordings — see Setting a manual recording on page 46. • The front panel display shows EPG when receiving data. If you power on the recorder during an EPG download, the download is cancelled. • EPG data may be received several times a day. All updates are automatic.
PAGE 38
DVRLX70D_WV_EN.book 05 38 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide Chapter 5 Using the GUIDE Plus+® electronic programme guide This chapter is only applicable if the EPG Type Select setting made in the Setup Navigator (or the Initial Setup menu) is set to GUIDE Plus+. The GUIDE Plus+® system The GUIDE Plus+® system* is a free, interactive on-screen television programming guide.
PAGE 39
DVRLX70D_WV_EN.book 39 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 5 Menu bar – Gives access to the various areas of the GUIDE Plus+ system. 6 Grid – Shows TV listings information for the next seven days by channel and time. GUIDE Plus+ navigation The table below shows a summary of the remote buttons you’ll use to navigate the GUIDE Plus+ system. Key What it does  REC Press to set or cancel OneButton-Recording.
PAGE 40
DVRLX70D_WV_EN.book 40 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 05 Lock/Unlock video window Areas When you enter the GUIDE Plus+ system, the channel you were watching remains visible in the video window. The date stamp above the window lets you know the channel, date and time. The GUIDE Plus+® system consists of seven Areas. All Areas can be accessed from the Menu bar.
PAGE 41
DVRLX70D_WV_EN.book 41 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide • Tune to a programme that’s currently showing1 • Set a programme to record • Lock or unlock the video window • Access Information panels 1 bar. 05 Select ‘Search’ from the Menu 2 Select a category and a subcategory.
PAGE 42
DVRLX70D_WV_EN.book 42 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 05 Using My Choice keywords for a search My TV Area In addition to the standard categories, you can also set your own keywords. The My TV Area allows you to set up a personal profile. You can define a profile by channels, themes and/or keywords. As soon as a personal profile has been set, the GUIDE Plus+ system continuously scans the TV listings for the next seven days.
PAGE 43
DVRLX70D_WV_EN.book 43 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 3 To add a channel to your profile, press the YELLOW Action button. Select a channel from the mosaic of channel icons and press ENTER. Repeat this step to add up to 16 channels. 4 To add a category to your profile, highlight ‘Categories’ and press the YELLOW Action button. 05 5 To add a keyword to your profile, highlight ‘Keywords’ and press the YELLOW Action button.
PAGE 44
DVRLX70D_WV_EN.book 05 44 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide Editing a scheduled recording You can edit any parameter in a scheduled recording, or delete it if you no longer require it1. 4 Enter a name for the scheduled recording. 1 Highlight the left tile of a scheduled recording. Use the /// buttons followed by ENTER to select characters from the onscreen keyboard.
PAGE 45
DVRLX70D_WV_EN.book 45 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 7 Press the GREEN Action button (Frequency) to change the recording frequency. 05 • Auto Replace Recording is only available as an option with regular daily or weekly recordings. 9 Press  to access the extended recording options. Select from the various options for one-time, daily and weekly recordings. 8 Press YELLOW Action button (Destination) to select the recording destination.
PAGE 46
DVRLX70D_WV_EN.book 46 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 05 Deleting a scheduled recording 1 Highlight the left tile of a scheduled recording. 3 Use the number buttons to enter a PlusCode programming number. Please enter the PlusCode programming number and press ENTER to confirm. 2 Press the RED Action button (Delete). The scheduled event is deleted.
PAGE 47
DVRLX70D_WV_EN.book 47 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 3 Use the number and /// buttons to enter the recording date, then press the GREEN Action button (Next). 05 The Editor Area The Editor Area is the central location for you to manage your channels. Any changes you make here will affect what is displayed in the Grid Area. The Editor Area is mainly used when setting up the GUIDE Plus+ system to make any manual changes as necessary.
PAGE 48
DVRLX70D_WV_EN.book 48 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide 05 Changing the source and programme number 1 Select ‘Editor’ from the Menu bar. The Setup Area The Setup Area is where you can set up the GUIDE Plus+ system for your particular region, TV reception conditions, and so on. Making changes to your GUIDE Plus+ setup Name BBC1 BBC2 ITV CH4 CH5 BBC3 ITV2 E4 UKGOL On/Off On On On On On On On Off On Source D. TV D. TV D. TV D. TV D. TV Ext. Rec. 1 D. TV D.
PAGE 49
DVRLX70D_WV_EN.book 49 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide Manual Host Channel setup The GUIDE Plus+ system will automatically identify your Host Channel as soon as the recorder is put into standby for the first time. See the table on page 36 for a list of all the European Host Channels.
PAGE 50
05 Guide Plus+ EPG_EU.fm 05 50 ページ２００７年７月１２日 Switch this recorder into standby. The next morning, please perform the GUIDE Plus+ setup again to see if your external receiver can now be controlled. terrestrial or cable connection only to receive data this way. It is important that you identify your Host Channel correctly in the Editor Area. – The external receiver that you use is currently not supported.
PAGE 51
DVRLX70D_WV_EN.book 51 ページ２００７年７月６日金曜日午後２時６分 Using the GUIDE Plus+® electronic programme guide • I used the One-Button-Record feature (red Action button) to set a recording, but I recorded the wrong channel. If the channel to be recorded is received via the external receiver first make sure that the external receiver was left switched on. Next, in the Editor Area, make sure that the channel to be recorded is correctly set: Access the Editor Area.
PAGE 52
DVRLX70D_WV_EN.book 06 52 ページ２００７年７月６日金曜日午後２時６分 Using the digital electronic programme guide Chapter 6 Using the digital electronic programme guide This chapter is only applicable if the EPG Type Select setting made in the Setup Navigator (or the Initial Setup menu) is set to Digital EPG. The Digital EPG system The Digital EPG shows a table of scheduled digital TV programmes and detailed information about individual programmes.
PAGE 53
DVRLX70D_WV_EN.book 53 ページ２００７年７月６日金曜日午後２時６分 Using the digital electronic programme guide Using the Digital EPG • To quit the display of detailed information, press INFO again (or RETURN/EXIT). Using the Digital EPG you can check the schedule of digital TV programmes, view information about desired programmes, and/or select programmes. D007 ************ Select a TV programme. 13:40 - 14:05 ************* ************************** GUIDE 1 Press to display the Digital EPG screen.
PAGE 54
DVRLX70D_WV_EN.book 06 54 ページ２００７年７月６日金曜日午後２時６分 Using the digital electronic programme guide 3 Enter the timer recording settings. Use the / buttons to select a field; use the / buttons to change the value1. Record to – Select HDD for hard disk recording or DVD for DVD recording2. Timer Programme Set Manhattan Open Tennis CH Date D.TV003 Start SUN 1/4 Detailed Settings Record To Recording Mode VPS/PDC Auto Replace Rec.
PAGE 55
DVRLX70D_WV_EN.book 55 ページ２００７年７月６日金曜日午後２時６分 Using the digital electronic programme guide EPG Link1 (UK only) – Choose whether or not to have this device automatically record scheduled programmes from the Digital EPG even if the times in which they are broadcast change. Series Recording2 (UK only) – Choose whether or not to record all programmes from a series when you make a recording from the Digital EPG (for HDD recordings only).
PAGE 56
DVRLX70D_WV_EN.book 06 56 ページ２００７年７月６日 ENTER The Timer Programme Set screen appears from which you can edit the settings. ENTER 4 Enter the timer recording settings. Use the / buttons to select a field; use the / buttons to change the value. For more information on the options available at the Timer Programme Set screen, see Setting timer programmes on page 53. ENTER 5 After entering all the timer recording information, highlight ‘Store Programme’ and press ENTER.
PAGE 57
DVRLX70D_WV_EN.book 57 ページ２００７年７月６日金曜日午後２時６分 Using the digital electronic programme guide Deleting a timer programme You can delete timer programmes you no longer need. 1 TIMER REC Press TIMER REC. 1 TIMER REC 06 Press TIMER REC. 2 Highlight the timer programme you want to search. 3 Press  then select ‘Alternate Search’ from the command menu panel. • The search results are displayed.
PAGE 58
DVRLX70D_WV_EN.book 06 58 ページ２００７年７月６日金曜日午後２時６分 Using the digital electronic programme guide EPG Search 2 Highlight the timer programme you want to search. 3 Press  then select ‘Recommendation Search’ from the command menu panel. The search results are displayed. Choose the programme you would like to record and press either the RED button or ENTER to schedule a recording. 1 Press YELLOW when the EPG screen (Programme List, Detailed information or Search Result) is displayed.
PAGE 59
DVRLX70D_WV_EN.book 59 ページ２００７年７月６日金曜日午後２時６分 Recording 07 Chapter 7 Recording About DVD recording This recorder can record to DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD-R DL and DVD+R DL media. DVD-R and DVD-RW discs can be initialized for Video mode or VR mode recording. Each has its advantages, and it depends on what you want to do with the recording which mode you choose.
PAGE 60
DVRLX70D_WV_EN.book 07 60 ページ２００７年７月６日 Recording to DVD-R DL/DVD+R DL discs Recording to DVD-R DL/DVD+R DL discs is generally the same as recording to regular single-layer discs; however, please note the following points: • When the recorder switches from the first layer to the second during recording a DVD-R DL (Video mode) disc, a new title is automatically started on the new layer. • Up to 99 titles can be recorded on a DVD-R DL (Video mode) disc.
PAGE 61
DVRLX70D_WV_EN.book 61 ページ２００７年７月６日金曜日午後２時６分 Recording Restrictions on video recording You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause automatically and an error message will be displayed on-screen. Video that is ‘copy-once only’ can only be recorded to DVD-RAM or HDD, CPRMcompatible VR mode DVD-R/-RW (see below).
PAGE 62
DVRLX70D_WV_EN.book 07 62 ページ２００７年７月６日金曜日午後２時６分 Recording Tip • When changing terrestrial digital broadcast channels, channels with a low signal strength may result in a black screen being displayed. • For other channels, it may take a short while for the channel picture to appear, and/or for the channel number to appear. • In both of the above cases, some improvement may be possible by adjusting the antenna. Using the D.TV Channel List When in D.
PAGE 63
DVRLX70D_WV_EN.book 63 ページ２００７年７月６日金曜日午後２時６分 Recording 07 The channel banner displays an icon ( ) to indicate that the MHEG application can be run. • TEXT • You can also select the language for a non-NICAM bilingual broadcast. A (L) Press to start the MHEG application.1 • You can also use any of the colour buttons. • Press TEXT to quit the MHEG application.
PAGE 64
DVRLX70D_WV_EN.book 07 64 ページ２００７年７月６日金曜日午後２時６分 Recording Setting the picture quality/ recording time DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD Before starting a recording, you will usually want to set the picture quality/recording time. There are six standard settings available, which allow you to choose a balance between picture quality and recording time.
PAGE 65
DVRLX70D_WV_EN.book 65 ページ２００７年７月６日金曜日午後２時６分 Recording 07 REC CHANNEL + 3 Select a TV channel to record. The front panel display shows the channel number, or channel name if it’s available: – CHANNEL A.TV Channel preset • While the recorder is stopped, you can also use the number buttons on the remote to select the channel (For channel 24, press 2, 4 then ENTER). • If the recorder is stopped, you can also use the CH +/– buttons on the front panel to select the channel number.
PAGE 66
DVRLX70D_WV_EN.book 07 66 ページ２００７年７月６日金曜日午後２時６分 Recording Pause Live TV HDD The Pause Live TV feature lets you effectively pause a TV programme you’re watching. When you’re ready to resume watching, just press the  PLAY button.
PAGE 67
DVRLX70D_WV_EN.book 67 ページ２００７年７月６日金曜日午後２時６分 Recording 07 Using Pause Live TV Tip PAUSE LIVE TV 1 Start recording the current TV channel. Recording continues with playback paused. • Note that it may take up to 10 seconds for recording to start. 2 Press to start playback. You can also use the scan buttons (/ ), pause ( PAUSE) and stop ( STOP) — all without affecting the recording. STOP REC 3 Press to stop the recording. The operation is slightly different depending on the viewing source.
PAGE 68
DVRLX70D_WV_EN.book 07 68 ページ２００７年７月６日 DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD Using the timer recording features you can program up to 32 timer recordings up to a month in advance. Timer recording programmes can be set to record just once, every day, or every week.
PAGE 69
DVRLX70D_WV_EN.book 69 ページ２００７年７月６日金曜日午後２時６分 Recording • The hours between 3:00 and 5:00 in the morning are used by the GUIDE Plus+ system to download programme information. During these times, VPS/ PDC may not work reliably; leave VPS/ PDC off if you set a timer recording for these times.
PAGE 70
DVRLX70D_WV_EN.book 07 70 ページ２００７年７月６日金曜日午後２時６分 Recording • What happens when two or more timer programmes overlap? Basically, the programme with the earlier recording start time has priority. However, the recorder will start recording the programme with the later start time after the earlier programme is finished. If schedule to record two programmes have the same times (but different channels, for example), then only one of the two programmes will be recorded.
PAGE 71
DVRLX70D_WV_EN.book 71 ページ２００７年７月６日金曜日午後２時６分 Recording INPUT SELECT 2 Press repeatedly to select one of the external inputs to record from. The current input is shown on-screen and in the front panel display: • AV2/L1 – Input 11 • L2 – Input 2 (front panel) • L3 – Input 3 Check that the Audio In settings for External Audio and Bilingual Recording are as you want them (see Audio In on page 134).
PAGE 72
DVRLX70D_WV_EN.book 07 72 ページ２００７年７月６日金曜日午後２時６分 Recording DVD+RW discs don’t generally need finalizing. However, if you want a title menu to appear when you play the disc, then you will need to finalize. When using a DVD+RW, you can still record and edit even after finalizing. although the title menu will disappear if you do so. Finalize the disc again to generate a new title menu.
PAGE 73
DVRLX70D_WV_EN.book 73 ページ２００７年７月６日金曜日午後２時６分 Recording Initializing recordable DVD discs DVD-R DVD-RW DVD+RW DVD-RAM DVD-R/-RW discs can be initialized for either Video mode recording or VR mode recording.1 When you first load a blank DVD-RW or DVD+RW disc, the recorder initializes it for recording automatically. By default, blank DVD-RW discs are initialized for VR mode recording. See DVD-RW Auto Initialize on page 73 if you want to change the default to Video mode.
PAGE 74
DVRLX70D_WV_EN.book 08 74 ページ２００７年７月６日金曜日午後２時６分 Playback Chapter 8 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the cursor buttons and ENTER. To go back one level from any screen, use the RETURN/EXIT button. Remember also that the button guide at the bottom of every screen shows which buttons do what.
PAGE 75
DVRLX70D_WV_EN.book 75 ページ２００７年７月６日金曜日午後２時６分 Playback 08 5 When you’ve finished using the recorder, eject the disc and switch the recorder back into standby. CM BACK CM SKIP Playing DVD discs The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. / / TOP MENU MENU Press to start playback. If RESUME is displayed onscreen, playback starts from the place last stopped. STOP Press to stop playback.
PAGE 76
DVRLX70D_WV_EN.book 08 76 ページ２００７年７月６日金曜日午後２時６分 Playback PAUSE Pauses playback, or restarts playback when paused. Press to start scanning. Press repeatedly to increase the scanning speed. PREV NEXT Playing CDs and WMA/MP3 discs The table below shows the basic playback controls for Audio CDs1, and WMA/MP3 files. Press to start playback. Press to skip to previous/next chapter/title. (During playback you can also use the front panel CH +/– buttons.
PAGE 77
DVRLX70D_WV_EN.book 77 ページ２００７年７月６日金曜日午後２時６分 Playback PAUSE Pauses playback, or restarts playback when paused. 08 Playing DivX video files The table below shows the basic playback controls for DivX video files. Press to start scanning. Press repeatedly to increase the scanning speed. PREV NEXT CLEAR CLEAR ENTER CM BACK CM SKIP / RETURN/EXIT Press to start playback. If RESUME is displayed onscreen, playback starts from the place last stopped.
PAGE 78
DVRLX70D_WV_EN.book 78 ページ２００７年７月６日金曜日午後２時６分 Playback 08 Using the Disc Navigator with recordable discs and the HDD Changing the display style of the Disc Navigator You can use the Disc Navigator to browse and edit video on recordable DVDs and the HDD, and to view information on titles. You can choose to display titles in the Disc Navigator in various different ways, sorted alphabetically, by recording date, by genre, and so on.
PAGE 79
DVRLX70D_WV_EN.book 79 ページ２００７年７月６日金曜日午後２時６分 Playback 08 Using the Disc Navigator with playback-only discs CD WMA/MP3 DivX HDD/DVD Use the Disc Navigator to browse the contents of a disc and start playback. 1 2 DVD-Video Video CD Super VCD HDD/DVD 1 2 Select DVD. HOME MENU Display the Home Menu. Select DVD. Open the Disc Navigator. • The Disc Navigator is also accessible from the Home Menu. • Proceed to step 4 when playing back an Audio CD.
PAGE 80
DVRLX70D_WV_EN.book 08 80 ページ２００７年７月６日金曜日午後２時６分 Playback About the automatic display of titles This unit has built-in information on titles extracted from the Gracenote® database. This unit automatically searches for titles when you press  PLAY after loading an Audio CD or when you display the Disc Navigator. The following screen is displayed. HDD/DVD RECORDER Accessing to Gracenote Database 1 Navigate to the last entry in the folder list (‘Read next: ...’).
PAGE 81
DVRLX70D_WV_EN.book 81 ページ２００７年７月６日金曜日午後２時６分 Playback ENTER 3 Choose a view option, then press ENTER. The title list display is updated according to the new display preferences. Scanning discs 08 / / / / 2 Press and hold to start slow motion reverse or forward play. 3 Press repeatedly to change the slow motion speed. The current playback speed is indicated onscreen. 4 ALL You can scan discs at various speeds, forwards or backwards.1 1 During playback, start reverse or forward scanning.
PAGE 82
DVRLX70D_WV_EN.book 08 82 ページ２００７年７月６日金曜日午後２時６分 Playback • HOME MENU Select ‘Play Mode’ from the Home Menu. Play Mode Search Mode A-B Repeat Repeat Programme Title/Chapter/Track Search:For example, for track 6, press 6. 3 Time Search Title Search Chapter Search ENTER Start playback. A-B Repeat DVD HDD • Select Play Mode from the command menu for Audio CDs, WMA/MP3 files, or DivX1 files by pressing  in the Disc Navigator.
PAGE 83
DVRLX70D_WV_EN.book 83 ページ２００７年７月６日金曜日午後２時６分 Playback 08 Repeat play Programme ALL There are various repeat play options, depending on the kind of disc loaded, or if you’re using the HDD for playback. It’s also possible to use repeat play together with programme play to repeat the tracks/ chapters in the programme list (see Programme play below).1 ENTER • Select ‘Repeat’ from the Play Mode menu, then choose a repeat play mode.
PAGE 84
DVRLX70D_WV_EN.book 08 84 ページ２００７年７月６日金曜日午後２時６分 Playback • To repeat play the programme list, select Programme Repeat from the Repeat Play Mode menu (see Repeat play on page 83). • Except CD, WMA/MP3: Press CLEAR during playback to switch off programme play (if no menu OSD, such as the Disc Navigator, is displayed). Press while stopped to erase the programme list.
PAGE 85
DVRLX70D_WV_EN.book 85 ページ２００７年７月６日金曜日午後２時６分 Playback 08 Switching audio channels Switching camera angles DVD (VR) DVD-RAM HDD DVD-Video CD Video CD Super VCD WMA/MP3 For HDD1 and VR mode content recorded with bilingual audio, you can switch between left (L) channel, right (R) channel, or both (L+R).2 When playing Video CDs and Audio CDs you can switch between stereo, just the left channel or just the right channel. Some Super VCDs have two soundtracks.
PAGE 86
DVRLX70D_WV_EN.book 08 86 ページ２００７年７月６日 Press DISPLAY once to see the HDD and removable disc (DVD, etc.) activity. Use the HDD/DVD button to switch between the two kinds of display. The example displays below show highspeed copying from HDD to DVD, and HDD chase playback.
PAGE 87
DVRLX70D_WV_EN.book 87 ページ２００７年７月６日金曜日午後２時６分 Playing and recording from a DV camcorder 09 Chapter 9 Playing and recording from a DV camcorder You can play back and record video from a DV camcorder connected to the DV IN jack on the front panel of this recorder. Important • If you connect a second recorder using a DV cable, you cannot control the second unit from this one. • You can’t control this unit remotely from a component connected to the DV IN jack.
PAGE 88
DVRLX70D_WV_EN.book 88 ページ２００７年７月６日金曜日 Playing and recording from a DV camcorder 09 1 Make sure your DV camcorder is connected to the front panel DV IN jack. Also, set the camcorder to VTR mode. 2 • If you restart recording after stopping the camcorder, the first few seconds of the camcorder tape will not be recorded. Use the pause button on your camcorder instead and recording will start immediately.
PAGE 89
DVRLX70D_WV_EN.book 89 ページ２００７年７月６日金曜日午後２時６分 Playing and recording from a DV camcorder 09 • There’s a picture, but no sound! ENTER 5 Select ‘Record to Hard Disk Drive’ or ‘Record to DVD’. The DV tape is rewound to the beginning. Once it is rewound, the DV tape is played from the beginning and copied to either the HDD or a DVD. • If there is a gap of two minutes or more between recorded contents, the copying process is automatically stopped.
PAGE 90
DVRLX70D_WV_EN.book 10 90 ページ２００７年７月６日金曜日午後２時６分 Editing Chapter 10 Editing Editing options The table below shows which commands you can use with the HDD and different disc types.
PAGE 91
DVRLX70D_WV_EN.book 91 ページ２００７年７月６日金曜日午後２時６分 Editing 10 The Disc Navigator screen PREV • The Disc Navigator screen is where you can edit video content on unfinalized Video mode and DVD-R/-RW (VR mode) discs, DVD+R/ +RW and DVD-RAM, as well as video content on the hard disk drive. HDD/DVD Press to switch between the HDD and DVD Disc Navigator screens.
PAGE 92
DVRLX70D_WV_EN.book 10 92 ページ２００７年７月６日金曜日午後２時６分 Editing HDD genres Play The large capacity of the HDD means that there may be many hours of video in the recorder. To help you organize your HDD video content you can assign different genres to titles. There are 20 genres in total, including five user-definable ones that you can name as you like. Create DVD (VR) DVD-RAM Play List only DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD Use this function to start playback of a title.
PAGE 93
DVRLX70D_WV_EN.book 93 ページ２００７年７月６日金曜日午後２時６分 Editing 10 ENTER 2 Select ‘Erase’ from the command menu panel. 3 title. ENTER Input a name for the selected Input Title Name 23:00 Fri 3/12 Pr 4 SP CAPS small DN O OOO 0 1 2 3 4 5 + – /@ [ c £ \ § 2 3 ´ µ¶ · Tip • You can erase a title quickly by pressing CLEAR when the title is highlighted. Confirm the edit by pressing ENTER.
PAGE 94
DVRLX70D_WV_EN.book 94 ページ２００７年７月６日金曜日午後２時６分 Editing 10 Using the remote key shortcuts to input a name The table below shows the remote control key shortcuts that you can use to input characters in the name input screen. Pressing a button repeatedly cycles through the characters shown. If you want to enter two characters in succession that are both on the same button (for example a P and an R), press  to advance the cursor one space manually between inputting the two characters.
PAGE 95
DVRLX70D_WV_EN.book 95 ページ２００７年７月６日金曜日午後２時６分 Editing 10 Set Thumbnail Erase Section HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD DVD (VR) DVD-RAM You can change the thumbnail picture that appears in the Disc Navigator for a title to any frame that appears in that title. Using this command you can delete a part of a title, ideal for cutting out the commercial breaks in a recording made from the TV. 1 Highlight the title you want to change the thumbnail picture for.
PAGE 96
DVRLX70D_WV_EN.book 10 96 ページ２００７年７月６日金曜日午後２時６分 Editing ENTER 5 Highlight ‘To’ then, in the same way, find the end of the section to erase, then press ENTER. After pressing ENTER, another marker indicates the end of the section, with the section itself marked in red. 4 Use the playback controls (, , , , etc.) to find the place you want to divide the title. Divide Title (HDD) 23:00 Fri 3/12 Pr 4 SP Rec. time 10–1 00.00.09.15 Play Pause ENTER 6 Select ‘Yes’ to confirm or ‘No’ to cancel.
PAGE 97
DVRLX70D_WV_EN.book 97 ページ２００７年７月６日金曜日午後２時６分 Editing 3 edit. ENTER 10 Move command only: Select the destination for the chapter, and press ENTER. HDD only: Select the type of Chapter Edit (DVD VR mode Play List) HDD/DVD RECORDER Please select the type of editing. 19:00 Mon 29/11 Pr 2 SP Erase 1h00m Rec. time Move 0h01m Chapter Cancel Video Mode Compatible Editing is recommended for compatibility with high-speed copying.
PAGE 98
DVRLX70D_WV_EN.book 98 ページ２００７年７月６日金曜日午後２時６分 Editing 10 ENTER 2 Select ‘Edit’ > ‘Set Genre’ from the command menu panel. Disc Navigator (HDD) 101 10Titles Erase 2h00m(1.0G) 2h00m(1.0G) Set Thumbnail Cancel Cancel 1h00m(1.0G) 7 3 ENTER 19:00 MON 29/11 Pr 2 SP 19:00 Mon 29/11 Pr 2 SP 1h00m(1.0G) Select a genre for the title. Disc Navigator (HDD) 101 10Titles 23:00 FRI Pr 4 SP 11/29 MON3/12 7:00PM Play 23:00 Fri 3/12 Pr 4 2ch SP 11/29Mon 7:00PM Title SP name No Category Erase 2h00m(1.
PAGE 99
DVRLX70D_WV_EN.book 99 ページ２００７年７月６日金曜日午後２時６分 Editing 3 title. ENTER 10 Select a new position for the Title to move Disc Navigator (DVD) 11 The screen below shows title 3 selected to be appended to title 1. 10Titles 23:00 FRI 11/29 MON3/12 7:00PM 23:00 Fri 7:00PM 3/12 Pr 4 2ch SP 11/29Mon ENTER 3 Select another title to combine with the first. This title will be appended to the first title selected. SP 2h00m(1.0G) 2h00m(1.
PAGE 100
DVRLX70D_WV_EN.book 100 ページ２００７年７月６日金曜日午後２時６分 Editing 10 Multi-Mode ENTER 2 Select one of the userdefinable genre names. Disc Navigator (HDD) 10Titles 101 23:00 FRI Pr 4 SP 11/29 MON3/12 7:00PM Play 23:00 Fri 3/12 Pr 4 2ch SP Free1 11/29Mon 7:00PM SP 9 20:00 FRI 3/12 Pr 9 SP Free4 20:00 Fri 3/12 Pr 9 SP 8 22:00 THU 2/12 Pr 7 Cancel SPGenre Name 22:00 Thu 2/12 Pr 7 SP 7 19:00 MON 29/11 Pr 2 SP 19:00 Mon 29/11 Pr 2 SP Erase Free2 2h00m(1.0G) 2h00m(1.
PAGE 101
DVRLX70D_WV_EN.book 101 ページ２００７年７月６日 Editing 金曜日午後２時６分 10 Undo DVD (Video) DVD (VR) DVD+R DVD+RW If you make a mistake while editing, you can generally undo it. There is one level of undo (in other words, you can only undo the last edit you made). ENTER • Select ‘Undo’ from the command menu panel. • You can’t undo anything after exiting the Disc Navigator screen. Disc Navigator (DVD) 1 0Titles 11/29 MON 7:00PM Play No title 11/29Mon 7:00PM 2ch SP 4 Titles Erase 2h00m(1.0G) 2h00m(1.
PAGE 102
DVRLX70D_WV_EN.book 11 102 ページ２００７年７月６日金曜日午後２時６分 Copying and backup Chapter 11 Copying and backup Introduction Restrictions on copying Use the copying features of this recorder to: Commercial DVD-Video discs are protected using Copy Guard. These discs cannot be copied to the HDD. • Back up important recordings stored on the HDD to a DVD. • Make a DVD copy of a recording on the HDD to play in another player. • Transfer video from a DVD to the HDD for editing.
PAGE 103
DVRLX70D_WV_EN.book 103 ページ２００７年７月６日金曜日午後２時６分 Copying and backup HDD to DVD copies are made in the same recording mode. When copying DVD to HDD, the copy is made in whatever recording mode is currently set. Make sure that a recordable DVD disc is loaded when trying to copy from the HDD. REC MODE 1 If you’re copying from DVD to the HDD, select a recording mode. Note that selecting a recording mode higher than the title playing will not result in a better quality recording.
PAGE 104
DVRLX70D_WV_EN.book 104 ページ２００７年７月６日 • Thumbnail picture markers and chapter markers for the Disc Navigator are copied, but their position in the copy may be slightly changed from the original. • If some part of the title being copied is copy-protected, copying will start, but the copy-protected portions will not be copied. Using Copy Lists * See also Copyright on page 102. At its simplest, a Copy List is just a list of HDD or DVD titles that you want to copy.
PAGE 105
DVRLX70D_WV_EN.book 105 ページ２００７年７月６日金曜日午後２時６分 Copying and backup 11 • When adding titles that contain material of more than one aspect ratio (screen size), each part with a different aspect ratio will be added as a separate title if high-speed copying is possible. Depending on the title1, high-speed copying may not be possible to DVDs. 6 Press  to display the command menu panel.
PAGE 106
DVRLX70D_WV_EN.book 11 106 ページ２００７年７月６日金曜日午後２時６分 Copying and backup • Set Thumbnail – Set the thumbnail frame for a title (see Set Thumbnail on page 95). • Recording Mode – Set the picture quality of the copy (see Recording Mode on page 107). • Bilingual – Set how bilingual audio should be copied when copying from HDD to DVD-R/-RW (Video mode) and DVD+R/+RW (see Bilingual on page 108). • Cancel – Exit the menu. Repeat this step for as many titles you have that need editing. 9 panel.
PAGE 107
DVRLX70D_WV_EN.book 107 ページ２００７年７月６日金曜日午後２時６分 Copying and backup 1 HOME MENU Select ‘Copy’ from the Home Menu. 2 ENTER 3 ENTER Select ‘DVD/CD  HDD’. Select a Copy List type. • Selecting Create New Copy List will erase any Copy List already stored in the recorder. 11 • Select Recording Mode if you want to change the recording quality (see Recording Mode below). ENTER 8 Select ‘Start Copy’ to start copying.
PAGE 108
DVRLX70D_WV_EN.book 108 ページ２００７年７月６日金曜日午後２時６分 Copying and backup 11 start copying. In this case, either change the recording quality, or press RETURN/EXIT to go back to the Copy List screen and erase one or more titles from the Copy List. Bilingual 3 Load the disc you want to make a backup of. You can only make backup copies of finalized Video mode DVD-R/-RW discs, finalized DVD+R or DVD+RW discs (excluding DVD-R DL/DVD+R DL discs).
PAGE 109
DVRLX70D_WV_EN.book 109 ページ２００７年７月６日金曜日午後２時６分 Copying and backup • Actual recordable capacity of discs vary so there may be cases where the contents of the disc you’re backing-up will not fit on to a particular blank disc. If this happens, please try another brand of disc. • DVD-R/-RW discs can only be backed up to DVD-R/-RW discs; DVD+R/+RW discs can only be backed up to DVD+R/ +RW discs. 6 Select ‘Start’ to start writing the backed-up data to the blank disc.
PAGE 110
12 Jukebox.fm 110 ページ２００７年７月１３日金曜日午後７時３１分 Using the Jukebox 12 Chapter 12 Using the Jukebox The Jukebox feature allows you to use the recorder’s HDD to store and playback music from your CDs. You can also transfer WMA/ MP3 files stored on CD-R/-RW/-ROM, DVD, USB device or PC. 4 Display the command menu. The command menu panel Disc Navigator (DVD/CD) Track List Copying music to the HDD CD The first step is to copy some music to the HDD. CD audio, WMA and MP3 files are copied at high speed.
PAGE 111
DVRLX70D_WV_EN.book 111 ページ２００７年７月６日金曜日午後２時６分 Using the Jukebox 12 Copying files via USB Connect PC Connecting a regular USB device Using a USB connection, you can copy WMA and MP3 files from a PC to the HDD of this device. Operations carried out on the PC require Windows Media Player 11. You can copy WMA or MP3 files from a connected USB device, such as a USB drive, to the HDD. 1 Connect the USB device. 2 HOME MENU Select ‘Jukebox’ from the Home Menu.
PAGE 112
DVRLX70D_WV_EN.book 112 ページ２００７年７月６日金曜日午後２時６分 Using the Jukebox 12 ENTER 3 Select ‘Connect PC’. ENTER 4 Select ‘Yes’ to confirm or ‘No’ to cancel. 5 Verify that the import screen is displayed on the device. If no actions are carried out for 20 minutes, the import screen is automatically closed. To reopen it, you will have to repeat steps 2 through 4. Status Number of copied folders you would like to copy, and press the right mouse button. 3. Click ‘Add to Sync list’. 4. Click ‘Start Sync’.
PAGE 113
DVRLX70D_WV_EN.book 113 ページ２００７年７月６日金曜日午後２時６分 Using the Jukebox 12 • If no actions are carried out for 20 minutes after copying, the import screen is automatically closed. Playing music from the Jukebox You can select artists, albums or individual tracks from the Jukebox to play. Note • When using the sync function of Windows Media Player 11, music, artist and album folders are created as follows: 1 HOME MENU Select ‘Jukebox’ from the Home Menu. 2 Root Music Artist 1 Album 1 music1.
PAGE 114
DVRLX70D_WV_EN.book 114 ページ２００７年７月６日金曜日午後２時６分 Using the Jukebox 12 Creating a play list 5 Select the track you want to play back. • To play back all tracks, select All. 6 Display the command menu. ENTER 1 Select a track you want to add to a play list. 2 Display the command menu. Jukebox HDD Track List Track Original ENTER 10 Tracks ALL 3 Select ‘Add to Play List’ from the menu.
PAGE 115
12 Jukebox.fm 115 ページ２００７年７月９日月曜日午前１１時１１分 Using the Jukebox 12 Changing the display style of the Jukebox ENTER 1 Select an artist/album you want to change the display for. 2 • You cannot copy the albums/tracks stored on the HDD to a DVD or a USB device. 1 HOME MENU Select ‘Jukebox’ from the Home Menu. 2 Display the view options panel. Artist List Artist Artist Play List Original Original HDD Select ‘Listen to Music/Edit’. ENTER 3 Select an album/track you want to copy.
PAGE 116
DVRLX70D_WV_EN.book 12 116 ページ２００７年７月６日 Using the Jukebox • Edit > Artist name – Enter a name of up to 64 characters for the artist. See Title Name on page 93 for how to enter names. • Edit > Album name – Enter a name of up to 64 characters for the album. See Title Name on page 93 for how to enter names. • Edit > Track name – Enter a name of up to 64 characters for the track. See Title Name on page 93 for how to enter names. • Play List name – Enter a name of up to 12 characters for the Play List.
PAGE 117
13 Photo_Viewer_USB.fm 117 ページ２００７年７月６日金曜日午後３時１１分 The PhotoViewer 13 Chapter 13 The PhotoViewer From the PhotoViewer you can view JPEG photos and picture files stored on the HDD, recordable DVD or CD-R/-RW/-ROM, or on a USB-equipped digital camera.1 You can also import files and save them to the recorder’s HDD or a DVD-R/-RW disc. Currently selected folder in folder list PhotoViewer HDD Select Folder Folder Locating JPEG picture files 1 HOME MENU Select ‘PhotoViewer’ from the Home Menu.
PAGE 118
DVRLX70D_WV_EN.book 118 ページ２００７年７月６日金曜日午後２時６分 The PhotoViewer 13 Changing the display style of the PhotoViewer You can choose to display photos by grouping them by folder, file, or number of thumbnails. 1 Display the view options panel. ENTER 3 Select ‘Start Slideshow’ or ‘Start Audio Slideshow’ from the menu. When Start Audio Slideshow is selected, you can enjoy the slideshow while playing back music in Jukebox.
PAGE 119
DVRLX70D_WV_EN.book 119 ページ２００７年７月６日金曜日午後２時６分 The PhotoViewer 13 • To import multiple files, use the MultiMode; see Selecting multiple files or folders below. ANGLE • Press during the slideshow to rotate the displayed picture clockwise by 90º. Press repeatedly to continue rotating the picture in increments of 90º. ENTER 3 menu.
PAGE 120
DVRLX70D_WV_EN.book 120 ページ２００７年７月６日金曜日午後２時６分 The PhotoViewer 13 ENTER 3 menu. Select ‘Multi-Mode’ from the players/recorders that may not be compatible with JPEG file playback. Once the files have been copied, the disc is automatically finalized.
PAGE 121
DVRLX70D_WV_EN.book 121 ページ２００７年７月６日金曜日午後２時６分 The PhotoViewer A slideshow of the files is also recorded on the disc as a Video mode title, making it possible to view the photos on other DVD players/recorders that may not be compatible with JPEG file playback. Note however that you may need to finalize the disc before it will play on another DVD player (copying selected files doesn’t automatically finalize the disc). 13 • While ‘Cancel’ is displayed, you can press ENTER to cancel.
PAGE 122
DVRLX70D_WV_EN.book 122 ページ２００７年７月６日金曜日午後２時６分 The PhotoViewer 13 ENTER 3 Select ‘File Options’ or ‘Folder Options’. ENTER 4 Select ‘Copy’ or ‘Copy Folder Contents’. PhotoViewer HDD Folder2 File 12 Files HDD Remain 100.
PAGE 123
DVRLX70D_WV_EN.book 123 ページ２００７年７月６日金曜日午後２時６分 The PhotoViewer 13 5 Enter a new name for the file/folder. File names or Folder names can be up to 64 characters long. See Using the remote key shortcuts to input a name and Using a USB keyboard to enter a name on page 94 for how to enter a name. Locking/Unlocking files Locking files will protect them from accidental erasure and prevent them from being renamed. Use the same process to both lock and unlock files.
PAGE 124
DVRLX70D_WV_EN.book 14 124 ページ２００７年７月６日金曜日午後２時６分 The Disc Setup menu Chapter 14 The Disc Setup menu From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu. Basic settings Lock Disc DVD (VR) DVD-RAM • Default setting: Off Locking the disc will prevent accidental recording, editing or erasing of the disc.
PAGE 125
DVRLX70D_WV_EN.book 125 ページ２００７年７月６日金曜日午後２時６分 The Disc Setup menu Initialize settings DVD-R DVD-RW DVD+RW DVD-RAM You can initialize a recordable DVD-R/-RW disc for either VR mode or Video mode recording. The first time you load a new DVD-RW disc, it will be automatically initialized for recording according to the DVD-RW Auto Init. setting in the Disc Setup menu (see page 73).
PAGE 126
DVRLX70D_WV_EN.book 14 126 ページ２００７年７月６日 The Disc Setup menu 1 HOME MENU Select ‘Disc Setup’ from the Home Menu. ENTER 2 ‘Start’. Select ‘Optimize HDD’ then Disc Setup Optimize HDD Basic Start Initialize Finalize Optimize HDD A progress bar indicates how long there is left to go. If no actions are carried out for more than 20 minutes after the optimization process is completed, the unit turns itself off.
PAGE 127
DVRLX70D_WV_EN.book 127 ページ２００７年７月６日金曜日午後２時６分 The Video Adjust menu 15 Chapter 15 The Video Adjust menu Using the Video Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording. Setting the picture quality for TV and external inputs Picture Creation lets you choose a set of picture quality settings for the built-in TV tuner1 and for each external input.
PAGE 128
DVRLX70D_WV_EN.book 15 128 ページ２００７年７月６日金曜日午後２時６分 The Video Adjust menu • PureCinema – This setting optimizes the picture for film material when the video output is set to progressive. Usually set to Auto; but try switching to Off if the picture appears unnatural. • 3-D Y/C – Adjusts the brightness/colour separation. • YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component. • CNR – Adjusts the amount of noise reduction (NR) applied to the C (colour) component.
PAGE 129
DVRLX70D_WV_EN.book 129 ページ２００７年７月６日金曜日午後２時６分 The Video Adjust menu 3 Select the picture quality setting you want to adjust. Memory1 Prog. Motion Motion PureCinma Still Auto1 On Subtitle Adjust YNR Off Max CNR Off Max BNR Off Max MNR Off Max You can adjust the following settings: • Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive. (Prog. Motion is ineffective when PureCinema is On.
PAGE 130
DVRLX70D_WV_EN.book 16 130 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Chapter 16 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu. Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
PAGE 131
DVRLX70D_WV_EN.book 131 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation Setup Navigator Start Select to start the Setup Navigator. See also Switching on and setting up on page 31. Next Screen Scans for digital channels and replaces all the channel presets with the results. Before the scan starts you will need to select your country. After the scan is complete the recorder tells you whether any new channels were found, and if so, how many.
PAGE 132
DVRLX70D_WV_EN.book 16 132 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation Signal Check Next Screen Use this screen to check the signal level and quality of digital channels. Use the / buttons to change the RF channel; select Add New Channels then press ENTER to scan for new channels; press HOME MENU to exit. Aerial Power On Power is supplied to the connected aerial (antenna) when this recorder is on or in standby.
PAGE 133
DVRLX70D_WV_EN.book 133 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation Manual CH Setting Next Screen Proceed to the next screen if you need to adjust any of the settings made by auto tuning. Select your country, then proceed to the manual channel setting screen: • Change channel presets using the Smart Jog. • To skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.
PAGE 134
DVRLX70D_WV_EN.book 16 134 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation AV1 Out Video • Sets the AV1 (RGB)-TV SCART output to standard composite video (compatible with all TVs). S-Video Sets the AV1 (RGB)-TV SCART output to S-Video. Recommended if you are using a long SCART cable. RGB Sets the AV1 (RGB)-TV SCART output to RGB. Good quality but check your TV for compatibility.
PAGE 135
DVRLX70D_WV_EN.book 135 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation Bilingual Recording A/L • Record the left (A) channel of a bilingual source when recording to HDD with HDD Recording Format set to Video Mode On, to DVD-R/-RW (Video mode) or DVD+R/+RW or in LPCM mode, from an external source. B/R As above, but for right (B) channel recording.
PAGE 136
DVRLX70D_WV_EN.book 16 136 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation English • Sets the language of the on-screen displays to English. available languages Choose from the languages displayed for the on-screen displays. Language OSD Language On Screen Display and D.TV Language will both reflect this setting. Audio Language English • Sets the default audio language for DVD-Video playback to English.
PAGE 137
DVRLX70D_WV_EN.book 137 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation DVD Menu Language w/Subtitle Language • Sets the language of DVD-Video menus to the same as that set for the subtitle language. English Sets the language of DVD-Video menus to English. available languages Choose from the displayed languages to set the default language for DVD-Video menus. Other Select to set the DVD menu language to something other than the ones listed.
PAGE 138
DVRLX70D_WV_EN.book 16 138 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation Set Thumbnail 0 seconds • Sets the default thumbnail picture in the Disc Navigator to the first frame of the title. 30 seconds Sets the default thumbnail picture to 30 seconds into the title. 3 minutes Sets the default thumbnail picture to three minutes into the title.
PAGE 139
DVRLX70D_WV_EN.book 139 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation 4:3 (Letter Box) Select if you have a standard 4:3 TV and prefer the letter box format presentation for widescreen material. 16 Playback TV Screen Size 4:3 Select if you have a standard 4:3 TV and prefer the pan and (Pan & Scan) scan presentation for widescreen material. 16:9 • Select if you have a widescreen 16:9 TV. Your TV settings determine how 4:3 material will look.
PAGE 140
DVRLX70D_WV_EN.book 16 140 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation HDMI Output (only available when an HDMI device is connected) Screen Resolution 1920 x 1080p Constant 1920 x 1080p output. 1920 x 1080i Constant 1920 x 1080i output. 1280 x 720p Constant 1280 x 720p output. 720 x 576p (720 x 480p) Constant 720 x 576p output (when setting the Input Line System to 525 System, video is output in 720 x 480p).
PAGE 141
DVRLX70D_WV_EN.book 141 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Explanation HDMI Control On • Enable the HDMI Control function. Select this option when connected to an HDMI Control-compatible Pioneer plasma television, AV system (amplifier or AV receiver etc.) or HD AV converter. Off Disable the HDMI Control function.
PAGE 142
DVRLX70D_WV_EN.book 16 142 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Setting Options Software Update Next Screen Explanation The Software Update function can check for and download updated system software for the digital tuner. See Using Software Update (Digital tuner) on page 144. Options 2 USB Pause Live TV Restart USB Device If the connected USB device does not respond to the recorder, try using this option to restart it.
PAGE 143
DVRLX70D_WV_EN.book 143 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu Additional information about the TV system settings About the input line system This recorder is compatible with PAL, SECAM, 3.58 NTSC and PAL-60 TV systems. The Input Line System and Input Colour System settings determine how the recorder treats incoming video signals from an external input.
PAGE 144
DVRLX70D_WV_EN.book 144 ページ２００７年７月６日金曜日午後２時６分 The Initial Setup menu 16 Selecting other languages for language options ENTER 1 Select ‘Other’ from the language list. This option appears in the settings for DVD Menu Language, Audio Language, and Subtitle Language. 2 ENTER Select the language you want.
PAGE 145
DVRLX70D_WV_EN.book 145 ページ２００７年７月６日金曜日午後２時６分 Additional information 17 Chapter 17 Additional information Setting up the remote to control your TV Maker Code Alba 66 Bush 76 You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table below. 1 Press and hold down the CLEAR button, then enter the maker code for your TV. See the table on the following page for the list of maker codes.
PAGE 146
DVRLX70D_WV_EN.book 17 146 ページ２００７年７月６日金曜日午後２時６分 Additional information Minimum copying times The table below shows the minimum HDD to DVD copying time for one hour of video. Please note that not all discs are compatible with high-speed copying.1 Check with the disc manufacturer for compatibility. Rec mode DVD disc type SEP SLP EP LP SP XP 10 h 8h 6h 4h 2h 1h DVD-R/1x DVD-RW/1x 1x 6 mins. 7.5 mins. 10 mins. 15 mins. 30 mins. 60 mins. DVD-RW/2x DVD-R DL DVD-RAM/2x 2x 3 mins.
PAGE 147
DVRLX70D_WV_EN.book 147 ページ２００７年７月６日金曜日午後２時６分 Additional information 17 Manual recording modes The table below shows the approximate recording times for different DVD types in each manual recording mode, as well as the standard recording mode equivalents. For recording time on the HDD, see Specifications on page 161. Level MN 4 XP+*5 Video mode Off (HDD) VR mode (DVD-R/-RW) DVD-RAM VR mode (DVD-R DL) Dual-Layer DVD: DVD-R DL DVD+R DL SEP 600 mins. 1077 mins. SLP 480 mins. 420 mins.
PAGE 148
DVRLX70D_WV_EN.book 17 148 ページ２００７年７月６日金曜日午後２時６分 Additional information • Levels separated by a bold line show where there is a noticeable change in picture quality. • Audio recording in all manual recording modes is in Dolby Digital 2 ch format, except for LPCM mode, which is in Linear PCM format. • See also Recording on page 59. Troubleshooting Incorrect operation is often mistaken for trouble and malfunction.
PAGE 149
DVRLX70D_WV_EN.book 149 ページ２００７年７月６日金曜日午後２時６分 Additional information Problem Remedy No picture • Check that everything is connected properly (page 14). • Check that the connected TV and/or the AV amp/receiver is set to the correct input. • The recorder may be set to progressive scan with an incompatible TV. Reset to interlace by pressing and holding the front panel  (Stop) button then pressing  OPEN/CLOSE.
PAGE 150
DVRLX70D_WV_EN.book 17 150 ページ２００７年７月６日金曜日午後２時６分 Additional information Problem Remedy Can’t play a disc recorded using this recorder on another player • If the disc was recorded in DVD-R/-RW (Video mode) or DVD+R, make sure that it’s finalized (page 71). • Some players will not play recordable DVD discs, even when recorded in DVD-R/-RW (Video mode) or DVD+R and finalized. • If the disc was recorded in VR mode, the other player must be specifically RW compatible in order to play it (page 7).
PAGE 151
DVRLX70D_WV_EN.book 151 ページ２００７年７月６日金曜日午後２時６分 Additional information Problem Remedy After briefly unplugging or after a power failure the front panel display shows ‘--:--’ • A backup battery inside the recorder keeps the clock and other settings from being reset when there is no power to the recorder. After unplugging or a power failure, the battery keeps all settings for a period of several minutes. Reset the clock and other recorder settings to use the recorder again.
PAGE 152
DVRLX70D_WV_EN.book 17 152 ページ２００７年７月６日金曜日午後２時６分 Additional information HDMI Problem Remedy The connected HDMI or DVI device does not display any picture (and the front panel HDMI indicator does not light) • Try disconnecting then reconnecting the HDMI cable (while the power of both components is on). • Try switching the power of the HDMI/DVI device off then back on. • Try switching off the HDMI/DVI device and this recorder.
PAGE 153
DVRLX70D_WV_EN.book 153 ページ２００７年７月６日金曜日午後２時６分 Additional information Problem 17 Remedy HDMI Control does not • Verify that the HDMI cable is firmly connected (page 21). respond • Check whether HDMI Control is set to On for this unit and the device connected to this unit. For more information, refer to the operating instructions of your plasma television, AV system or HD AV converter. • Depending on the type of plasma television, some HDMI input terminals do not support the HDMI Control function.
PAGE 154
DVRLX70D_WV_EN.book 17 154 ページ２００７年７月６日金曜日午後２時６分 Additional information On-screen displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. 154 En Message Explanation/Action • Initializing disc. Please wait a moment. When you load a blank DVD-RW or DVD+RW disc, the recorder automatically initializes it. • Incompatible region number.
PAGE 155
DVRLX70D_WV_EN.book 155 ページ２００７年７月６日金曜日午後２時６分 Additional information 17 Message Explanation/Action • Repairing disc. • Repairing the HDD. During recording, the power was cut. This display appears when the power is restored. • Could not repair the disc. The recorder was unable to repair the disc after a power cut. The contents of the recording will be lost. • Overheating has stopped operation. Press DISPLAY to clear message.
PAGE 156
DVRLX70D_WV_EN.book 17 156 ページ２００７年７月６日金曜日午後２時６分 Additional information Message Explanation/Action • You are not allowed to watch this Conditional Access Programme. A CA module or smart card (obtained from your service provider) is required to watch the selected programme. Insert the supplied module or card into the Common Interface card slot on the front panel of the recorder (page 26). • There is no DV input or the input signal is unrecordable. No signal was detected at the DV IN jack.
PAGE 157
DVRLX70D_WV_EN.
PAGE 158
DVRLX70D_WV_EN.book 17 158 ページ２００７年７月６日金曜日午後２時６分 Additional information Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The programme is shown in widescreen with black bars at the top and bottom of the screen. 4:3 (Pan & Scan) The sides of the programme are cropped so that the picture fills the whole screen. 4:3 (Letter Box) 4:3 (Pan & Scan) The programme is presented correctly on either setting.
PAGE 159
DVRLX70D_WV_EN.book 159 ページ２００７年７月６日金曜日午後２時６分 Additional information 17 Handling discs Damaged discs When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge. Discs spin at high speed inside the recorder. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don’t risk using it; you could end up damaging the recorder.
PAGE 160
DVRLX70D_WV_EN.book 17 160 ページ２００７年７月６日金曜日午後２時６分 Additional information Hints on installation Moving the recorder We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it: If you need to move the recorder, first remove the disc, if loaded, and close the disc tray. Next, press  STANDBY/ON to switch the power to standby, checking that the POWER OFF indication in the display goes off. Wait at least two minutes.
PAGE 161
DVRLX70D_WV_EN.book 161 ページ２００７年７月６日金曜日午後２時６分 Additional information Specifications General Power requirements . . . . . 220 V to 240 V, 50 Hz/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . .60 W Power consumption in standby mode. . . . . . . . 0.70 W (Front panel display: off) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7 kg Dimensions . . . . . . . . . . . .420 mm (W) x 77 mm (H) x 355 mm (D) Operating temperature . . . . . . . . . . . .
PAGE 162
DVRLX70D_WV_EN.book 17 162 ページ２００７年７月６日 Antenna . . . . 75 Ω IEC 169-2 connector for VHF/UHF in/out (analog) . . . . .75 Ω IEC 169-2 connector for VHF/UHF in/out (digital) Video input . . . . . . . . . . . .AV2 (Input 1), Input 2 (front), Input 3 (rear) Input level . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . AV connector (Input 1), RCA jacks (Input 2, Input 3) Video output. . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 163
DVRLX70D_WV_EN.book 163 ページ２００７年７月６日金曜日午後２時６分 Additional information This product includes FontAvenue ® fonts licenced by NEC Corporation. FontAvenue is a registered trademark of NEC Corporation. Microsoft product screen shots reprinted with permission from Microsoft Corporation. Music recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.
PAGE 164
00 Cover_back_WV.fm 1 ページ２００７年６月１９日火曜日午後１時１分 HDD/DVD RECORDER Operating Instructions Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu) PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.