DVD Recorder Operating Instructions

Connecting up 02
17
En
Using other types of video
output
This recorder has standard (composite), S-
video and component video outputs. The
main difference between them is the quality
of the picture. S-video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
1 Connecting using an S-video
output
S-video carries the picture as separate color
and luminance (brightness) signals.
There are two S-video outputs for connection
to TVs, monitors, VCRs or other equipment.
• Use an S-video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-video input on your TV, monitor (or
other equipment).
2 Connecting using the component
video output
Component video carries the picture as two
separate color signals, plus a luminance
(brightness) signal.
See also
Component Video Out on page 108
for how to set up the component video
output for use with a progressive scan-
compatible TV.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
AC IN
S-VIDEO
VIDEO
AUDIO
L
R
OUTPUT 2
COMPONENT
VIDEO OUT
Y
P
B
P R
ANTENNA
IN
OUT
COAXIAL
IN
CONTROL
DIGITAL
OUT
OUTPUT 1
VIDEO
AUDIO
L
R
INPUT 3
OUTPUT 1
INPUT 1/AUTO START REC
S-VIDEO
HDMI OUT
TV
S-VIDEO
INPUT
COMPONENT
INPUT
1 2
DVR745H_IBD_EN.book 17 ページ ２００６年７月２７日 木曜日 午後４時１１分