RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents Important The screen shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution ................................................................................... 4 ■ Parts and controls....................................................................... 9 ■ Basic operation ......................................................................... 11 ■ Bluetooth®................................................
Camera settings ............................................................................................................................................... 48 Phone Connectivity Settings....................................................................................................................... 51 ■ Other functions......................................................................... 52 ■ Appendix ...................................................................................
Precaution Important safety information Before using this product, be sure to read and fully understand the following safety information: • Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations.
If your vehicle has a compliant backup camera that displays the backup view through the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Connection to the factory backup camera will require an adaptor, sold separately. Not all vehicles may be able to connect. Please check with a qualified professional installer for installation options specific to your vehicle.
video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake. When using a display connected to the video output terminal WARNING NEVER install the rear display in a location that enables the driver to watch video images while driving. To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.
• It may not be recognized properly by this product if a USB device that had been incorrectly disconnected from the computer is connected. Failure to operate After-sales service for Pioneer products Visit our website Visit us at the following site: https://www.pioneerelectronics.com/PUSA/ https://www.pioneerelectronics.ca/POCEN/ 1 2 3 4 Register your product. Receive updates on the latest products and technologies. Download owner’s manuals, order product catalogs, research new products, and much more.
Notes on internal memory • The information will be erased by disconnecting the yellow lead from the battery (or removing the battery itself ). • Some of the settings and recorded contents will not be reset. Meanings of symbols used in this manual This indicates model names that are supported by the described operations. This indicates to touch the appropriate soft key on the touch screen. This indicates to touch and hold the appropriate soft key on the touch screen.
Parts and controls Main unit English Touch to turn off the display information. To turn on the display information, touch again. Touch and hold to power off. To power back on, touch again. VOL (+/-) RESET LCD screen TIP If you power the unit off, you can turn off almost all functions. The unit turns on by operating the following functions: • An incoming call is received (only for hands-free phoning via Bluetooth). • A rear view camera image is input when the vehicle is in reverse.
Remote control W2770NEX English Volume (+/-) MODE SRC TOP MENU MENU Thumb pad MUTE AUDIO SUBTITLE ANGLE BAND/ESC RETURN or or FOLDER/P.CH Not used. Press to cycle through all the available sources. Press and hold to turn the power off. Not used. Not used. Not used. Not used. Press to select the tuner band when tuner is selected as a source. Not used. Press to pause or playback. Press to return to the previous track (chapter) or go to the next track (chapter).
Basic operation Resetting the microprocessor 1 2 Turn the ignition switch OFF. Press RESET with a pen tip or other pointed tools. Settings and recorded contents are reset to the factory settings. Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers. NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys : Returns to the previous screen. : Close the screen.
Operating list screens USB abcdefghi abcdefghi abcdefghi abcdefghi English # . A . G . M . S . Y . Z video folder Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when items cannot be displayed on a single page. Drag the side bar, the initial search bar or the list to view any hidden items. Operating the time bar 50:00 99:99 You can change the playback point by dragging the key.
Source icons TIP You can display the hidden source icon(s) by swiping left on the screen. Setting the clock display (page 52) English Settings (page 44) Displays the connected devices. : lights up when Apple CarPlay is available. : lights up when Android Auto is available. : lights up when hands-free phoning via Bluetooth is available. : lights up when Bluetooth audio is available. • Touch the device name to switch the device to be connected with Apple CarPlay or Android Auto.
Bluetooth® Bluetooth connection 5 6 7 8 Turn on the Bluetooth function on the device. Display the connected Bluetooth device list screen on the device. Touch . Touch . The device search screen appears. Touch [Yes] to start searching. Touch if another device is already connected to the unit. Touch a desired device on the screen. NOTE A pop-up message may appear if another device is already connected to the unit. Touch [OK] on the message. Touch [Yes] to pair with the device.
Bluetooth Settings 1 2 Touch . Touch then [Bluetooth Settings]. Menu Item Description [Connection] Activate to connect the last connected Bluetooth device automatically. [Auto Answer] (page 17) [Search] Search for available devices. [Bluetooth Memory Clear] Touch [OK] to clear the Bluetooth memory. [Bluetooth Paired Device List] Display the paired device list. Touch to delete registered device. Touch to activate/deactivate hands-free phoning or Bluetooth audio.
TIPS • on the top menu screen is not available while Android Auto is on. In that case, use the Android Auto phone function. • Confirm whether hands-free phoning via Bluetooth is activated if on the top menu screen is not available (page 13). Synchronizes the contacts on this product's phone book with the contacts on your phone manually. Using phone book Select a contact from the phone book. Touch the desired name on the list then select the phone number.
Menu Item Description [Auto Answer] Activate to answer an incoming call automatically. Adjusting the other party’s listening volume Notes for hands-free phoning ▶General notes • Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed. • The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.
• If the phone book in the phone contains image data, the phone book may not be transferred correctly. • Depending on the cellular phone, phone book transfer may not be available. Bluetooth audio NOTES • Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels: – A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is possible.
Switches between playback and pause. Skips files forward or backward. Sets a repeat play range. - 19 - English Plays files in random order.
Wi-Fi® By connecting your Wi-Fi certified mobile device to this product via Wi-Fi connection, you can use Apple CarPlay or Android Auto wirelessly. English Wi-Fi connection See the following chapters for the procedure on how to make a Wi-Fi connection for each application. • Apple CarPlay (page 34) • Android Auto (page 37) Wi-Fi Settings 1 2 3 Touch . Touch . Touch [Wi-Fi Settings]. Menu Item Description [Wi-Fi] Switches Wi-Fi connection on or off.
AV source Supported AV source Selecting a source 1 2 Touch . Touch the source icon. TIP You can display the hidden source icon(s) by swiping left on the screen. - 21 - English You can play or use the following sources with this product. • Radio • USB The following sources can be played back or used by connecting an auxiliary device.
Radio Starting procedure Press English 1 2 . Touch [Radio]. The Radio screen appears. Basic operation 1 XX.XX 6 XX.XX Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. FM1 BSM Selects the FM1, FM2, FM3, AM1 or AM2 band. Performs BSM (best stations memory) function (page 23). Manual tuning Seek tuning Skips to the nearest station from the current frequency. Local Activates/deactivates the local seek mode.
PS Recall a preset channel in order and broadcast each channel for 10 seconds. Storing the strongest broadcast frequencies (BSM) NOTES • Storing broadcast frequencies with BSM may replace those you have already saved. • Previously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit. 1 Touch BSM to begin search.
Compressed files Plugging/unplugging a USB storage device Plugging a USB storage device 1 2 Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable. NOTES • This product may not achieve optimum performance with some USB storage devices. • Connection via a USB hub is not possible. • A USB cable is required for connection. USB cable USB storage device Unplugging a USB storage device 1 Pull out the USB storage device from the USB cable.
TIP You can also start this source by pressing then touching [USB]. Basic operation English Audio source Switches between playback and pause. Skips files forward or backward. Performs fast forward or fast reverse. Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order. Selects a file from the list. Touch a file on the list to playback. TIPS • Touching a folder on the list shows its contents.
Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. English Switches between playback and pause. Skips files forward or backward. Performs fast forward or fast reverse. Sets a repeat play range for all files/the current folder/the current file. Selects a file from the list. Touch a file on the list to playback. TIPS • Touching a folder on the list shows its contents.
Still image source English Switches between playback and pause. Skips files forward or backward. Rotates the displayed picture 90° counterclockwise. Sets a repeat play range for all files/the current folder/the current file. Selects a file from the list. Touch a file on the list to playback. TIPS • Touching a folder on the list shows its contents. You can play a file on the list by touching it. • You can switch the following media file types.
iPhone NOTE iPhone may be referred to as iPod in this manual. English Connecting your iPhone When connecting an iPhone to this product, the settings are automatically configured according to the device to be connected. For details of the compatibility, refer to Compatible iPhone models (page 63). 1 2 3 Connect your iPhone via USB. If the iPod screen is automatically displayed, you do not need to perform the following steps. Touch . Touch [iPod].
Skips files forward or backward. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. TIP You can search a song in the songs list by dragging the initial search bar. NOTES • Depending on the generation or version of the iPhone, some functions may not be available. • Only 2 000 songs in the iPhone are available in the list if the iPhone has more than 2 000 songs. Available songs depend on the iPhone.
WebLink™ You can operate WebLink compatible applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
NOTE For USB connection, refer to the Installation Manual. For smartphone (Android™) users NOTE The video playback capability depends on the connected Android device. 1 Unlock your smartphone and connect it to this product via USB. TIP You can start this source by touching , swiping left on the screen, and touching [WebLink] if the screen except for WebLink appears after the USB connection. NOTES • For USB connection, refer to the Installation Manual.
USB Mirroring You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. WARNING Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Apple CarPlay You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTE The compatible finger gestures vary depending on the application for the iPhone. WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
4 Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. English Starting procedure Wired connection 1 Connect an Apple CarPlay compatible device to this product via USB. The application screen appears. TIP You can start this source by touching then touching [Apple CarPlay] if the screen except for Apple CarPlay appears after the USB connection.
Follow the on-screen instructions on the device to start the application. TIPS • When the USB connection with the other device has been made, the message that shows that the new device is available will appear. If you want to switch from the current device to the new one for use in the application, touch the pop-up message. • You can use Siri function by touching button once Apple CarPlay is activated. - 35 - English NOTES • For details on USB connection, refer to the Installation Manual.
Android Auto™ You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. For wireless connections To wirelessly use Android Auto on your car display, you need a compatible Android smartphone with an active data plan. You can check which smartphones are compatible at g.co/androidauto/requirements. NOTES • [Android Phone MSC] is deactivated to enable use of this function (page 51).
1 2 3 4 Touch . Touch . Touch [Phone Connectivity Settings]. English Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection 1 Connect an Android Auto compatible device to this product via USB. The application screen appears. TIP You can start this source by touching then touching [Android Auto] if the screen except for Android Auto appears after the USB connection.
9 Touch [Start] to start Android Auto. The unit configures the connection then start the application. TIP You can use voice recognition function by touching button once Android Auto is activated. - 38 - English NOTES • For details on USB connection, refer to the Installation Manual. • If five devices are already paired, the message confirming whether to delete the registered device is displayed. If you want to delete the device, touch [Agree].
SiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 2 3 4 Touch . Touch [SiriusXM]. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. You will need this number to activate your subscription. NOTE The SiriusXM Radio ID does not include the letters I, O, S, or F.
Listening to SiriusXM 1 2 Touch . Touch [SiriusXM]. TIP [RADIO ID] is displayed when Channel 0 is selected. Current channel display (Live broadcast mode) Tunes a channel directly. Tune 1 Pre1 6 Pre6 Recalls the preset channel stored to a key from the memory. Stores the current channel to a key. Selects a band. There are 3 bands. You can store 6 channels per band for a total of 18 presets. Performs channel number up/down. Performs fast channel number up/down.
Selects a channel from the list. Scroll through the list of all channels then touch the desired channel to tune to that channel. NOTES • The types of categories available depend on the types of channels available. • It may take time to display the channel list depending on the SiriusXM reception condition. Parental Control The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content.
AUX You can display the video image output by the device connected to video input. NOTE A Mini-jack AV cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 Touch then swipe left on the screen. Touch [AUX]. The AUX screen appears. - 42 - English CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Camera View You can display the video image output by the device connected to video or camera input. For details, refer to the Installation Manual. English Starting procedure 1 2 Touch then swipe left on the screen. Touch [Camera View] for connected camera view. The video image is displayed on the screen.
Settings You can adjust various settings in the main menu. 1 2 3 Touch . Touch . Touch one of the following categories, then select the options. System Settings (page 44) Display Settings (page 46) Audio & EQ Settings (page 47) Wi-Fi Settings (page 20) Bluetooth Settings (page 15) Camera settings (page 48) Phone Connectivity Settings (page 51) System Settings Menu Item Description [Choose Language] Select the system language.
Menu Item Description [Factory Reset] Touch [OK] to restore the settings to the default settings. CAUTION Do not turn off the engine while restoring the settings. [Connection Status] [GPS Antenna] Check that the leads are properly connected between this product and vehicle. Displays the connection status of the GPS antenna ([OK] or [NOK]) and the reception sensitivity. NOTE If reception is poor, change the installation position of the GPS antenna.
Menu Item Description [System Information] Displaying and updating the firmware version. CAUTION 1 Download the firmware update files into your computer. 2 Connect a blank (formatted) USB storage device to your computer then locate the correct update file and copy it onto the USB storage device. 3 Connect the USB storage device to this product (page 24). 4 Display the [System Settings] screen (page 44). 5 Touch [System Information]. 6 Touch [Update]. New firmware version information is displayed.
Menu Item Description [Wallpaper] Touch the wall paper from the preset items in this product or original pictures via the external device and touch [Apply]. The wall paper can be set from selections for the top menu screen and AV operation screen. Select the desired preset background display. You can set your favorite screen from the connected USB device by touching and sliding the bottom of screen to the right. Select the background display image of the connected USB storage device.
Menu Item Description [EQ] [Super Bass] [Powerful] [Natural] [Vocal] [Flat] [Custom] Select or customize the equalizer curve. Select a curve that you want to use as the basis of customizing then touch the frequency that you want to adjust. [Volume] [Main Volume] [Ring Volume] [Talking Volume] [Navi/Voice Volume] [TA Volume] Adjust the volume level by touching [+]/[-].
▶Camera for Camera View mode Camera View can be displayed at all times. Note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. To display the camera image, touch [Camera View] on the top menu screen (page 12). CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.
Menu Item Description [Parking Assist Guide Adjust] 1 Adjusting the guidelines by dragging or touching / / on the screen. 2 Touch [OK] to finish the settings. / CAUTION • When adjusting the guidelines, park the vehicle in a safe place and apply the parking brake; this setting is available only when the vehicle is parked with the parking brake applied. • Turn the vehicle off before getting out to place the markings. • The range projected by the rear view camera is limited.
Menu Item Description [Contrast] [-10] to [+10] Adjust the contrast. [Color] [-10] to [+10] Adjust the color saturation. Menu Item Description [Android Phone MSC] Set the USB connection mode for your smartphone (Android) to MSC (Mass Storage Class). NOTE This setting is not available when Android device or USB storage device is connected to this product via USB. [Driving Position] [Right] [Left] Setting the driving position.
Other functions Setting the clock display 1 2 Touch the current time on the screen. Set the following items in the settings. • The date display format: [d/m/y] (day-month-year) or [m/d/y] (month-day-year) • The time display format: [12hour] or [24hour] • The UTC (Universal Time Coordinated) time zone difference: UTC-12.00h to UTC+14.00h • Day-light saving time: [On] or [Off] You can also configure these items in [Date & Time] (page 44).
Appendix Troubleshooting Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → Power off mode is on. – Touch on this product to release the mode. Problems with the AV screen The screen is covered by a caution message and the video cannot be shown. → The parking brake lead is not connected or the parking brake is not applied. – Connect the parking brake lead correctly, and apply the parking brake. → The parking brake interlock is activated.
– Check the connection and make sure that the violet/white lead of the receiver is connected to the lead whose voltage changes when the shift lever is put in reverse. (Refer to the installation manual.) Problems with the phone screen Dialing is impossible because the touch panel keys for dialing are inactive. → Your phone is out of range for service. – Retry after re-entering the range for service. → The connection between the cellular phone and this product cannot be established.
or the nearest authorized Pioneer service center for assistance. www.siriusxm.ca or call 1-888-5397474. Channel Not Available → The channel that you have requested is not a valid SiriusXM channel. – Visit www.siriusxm.com for more information about the SiriusXM channel lineup. Incorrect Pass Code entered → The pass code is incorrect. – Enter the correct pass code. USB storage device Unsupport USB device → The connected USB device is not supported by this product.
Audio Format not supported → This type of file is not supported on this product. – Select a file that can be played. USB Mirroring Autolink can't connect right now. When it's safe to do so, check your Android phone. → The connection is not successfully established. – Stop your vehicle in a safe place and apply the parking brake. Perform the operations according to the following situations. – When the pop-up message appears on your mobile device, follow the message.
your phone. When the related information pops up on your phone, follow the pop-up message. Android Auto has disconnected. → Wi-Fi function on the device or the unit is turned off. – Turn on the Wi-Fi function on the device and the unit when you use Android Auto (page 20). Others Camera View & AUX No Video Signal → There is no video signal input. – Confirm whether the connection with the unit is established and there is an output from the external device.
USB storage device compatibility • For details about USB storage device compatibility with this product, refer to Specifications (page 65). • Protocol: bulk • You cannot connect a USB storage device to this product via a USB hub. • Partitioned USB storage device is not compatible with this product. • Firmly secure the USB storage device when driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or gas pedal.
AAC compatibility • This product plays back AAC files encoded by iTunes. SAMPLING FREQUENCY TRANSMISSION RATE .avi Compatible video codec Maximum resolution Maximum frame rate 8 kHz to 48 kHz CBR (16 kbps to 320 kbps) .mpg/.mpeg QUANTIZATION BIT RATE 8 kHz to 192 kHz 8 bit, 16 bit, 24 bit .mp4 Compatible video codec Maximum resolution Maximum frame rate USB storage device EXTENSION MAX RESOLUTION MPEG2 720 × 576 30 fps .avi 720 × 576 MPEG4, H.264 1 920 × 1 080 30 fps .
.m4v Compatible video codec Maximum resolution Maximum frame rate SiriusXM Satellite Radio H.264 1 920 × 1 080 30 fps .ts Maximum resolution Maximum frame rate MPEG4, H.264, MPEG2 1 920 × 1 080 30 fps .m2ts Compatible video codec H.264, MPEG2 Maximum resolution Maximum frame rate 1 920 × 1 080 30 fps SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved. Wi-Fi Wi-Fi® is a registered trademark of Wi-Fi Alliance®. .
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. FLAC AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Several applications can be used to encode AAC files, but file formats and extensions differ depending on the application which is used to encode. This unit plays back AAC files encoded by iTunes. WebLink WebLink™ is a trademark of Abalta Technologies, Inc.
App Store App Store is a service mark of Apple Inc., registered in the U.S. and other countries. iOS IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. iTunes iTunes is a trademark of Apple Inc., registered in the U.S. and other countries.
Compatible iPhone models Using app-based connected content Important Requirements to access app-based connected content services using this product: • Latest version of the Pioneer compatible connected content application(s) for the smartphone, available from the service provider, downloaded to your smartphone. • A current account with the content service provider.
Notice regarding video viewing Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights as protected by the Copyright Law. Using the LCD screen correctly Handling the LCD screen • When the LCD screen is subjected to direct sunlight for a long period of time, it will become very hot, resulting in possible damage to the LCD screen. When not using this product, avoid exposing it to direct sunlight as much as possible.
Specifications General Rated power source: 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system: Negative type Maximum current consumption: 10.0 A Dimensions (W × H × D): Chassis (D): 178 mm × 100 mm × 125 mm (7 in. × 37/8 in. × 4-7/8 in.) Nose: 171 mm × 97 mm × 2 mm (6-3/4 in. × 3-7/8 in. × 1/8 in.) Weight: 1.1 kg (2.4 lbs) Display Screen size/aspect ratio: 6.75 inch wide/16:9 (effective display area: 151.8 mm × 79.68 mm) (6 in. × 3-1/8 in.
Bluetooth Version: Bluetooth 4.2 certified Output power: +4 dBm Max. (Power class 2) Frequency band(s): 2 402.0 MHz to 2 480.0 MHz FM tuner Frequency range: 87.9 MHz to 107.9 MHz Usable sensitivity: 13 dBf (1.
CTA2006 Specifications Power output: 14 W RMS × 4 Channels (4 Ω and < = 1% THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and design are subject to possible modifications without notice due to improvements. - 67 - English Frequency: Approx. once per second GPS antenna Antenna: Micro strip flat antenna/right-handed helical polarization Antenna cable: 3.55 m (11ft. 7in.) Dimensions (W × H × D): 47 mm × 16.2 mm × 55 mm (1-7/8 in. × 5/8 in. × 2-1/8 in.) Weight: 104.0 g (0.
© 2022 PIONEER CORPORATION UC
English Français DMH-W2770NEX DMH-W2700NEX Español RDS AV RECEIVER RÉCEPTEUR AV AVEC RDS RECEPTOR AV RDS Installation Manual Manuel d’installation Manual de instalación
Important safety information WARNING Rear visibility systems (backup cameras) are required in certain new vehicles sold in the U.S. and Canada. U.S. regulations began according to a two year phase-in on May 1, 2016, and both the U.S. and Canada require that all such vehicles manufactured on or after May 1, 2018 have rear visibility systems.
Important safeguards WARNING Pioneer does not recommend that you install this product yourself. This product is designed for professional installation only. We recommend that only authorized Pioneer service personnel, who have special training and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF.
an external power amp’s system remote control terminal, the auto-antenna relay control terminal, or the antenna booster power control terminal (max. 300 mA 12 V DC). The control signal is output through the blue/white lead, even if the audio source is switched off. Brown (REAR VIEW CAMERA IN) Yellow/black (MUTE) Power cord This product Connect to system control terminal of the power amp (max. 300 mA 12 V DC). Light green Used to detect the ON/OFF status of the parking brake.
Power amp (sold separately) Important The speaker leads are not used when this connection is in use. iPhone and smartphone Smartphone (Android™ device) NOTES iPhone with Lightning connector Connecting via the USB port Connecting via the USB port English • For details on how to connect an external device using a separately sold cable, refer to the manual for the cable. • For details concerning the connection and operations of iPhone or smartphone, refer to the Operation Manual.
from the video by moving the shift lever to REVERSE (R). Camera View mode also allows you to check what is behind you while driving. WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION • The screen image may appear reversed. • With the rear view camera you can keep an eye on trailers, or back into a tight parking spot. Do not use for entertainment purposes. • Objects in rear view may appear closer or more distant than in reality.
Installation CAUTION • Never install this product in places where, or in a manner that: – Could injure the driver or passengers if the vehicle stops suddenly. – May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or shift lever. • To ensure proper installation, be sure to use the supplied parts in the manner specified.
When installing the antenna inside the vehicle (on the dashboard or rear shelf) WARNING Do not install the GPS antenna over any sensors or vents on the dashboard of the vehicle, as doing so may interfere with the proper functioning of such sensors or vents and may compromise the ability of the GPS antenna to properly and securely affix to the dashboard. Make sure the surface is free of moisture, dust, grime, oil, etc., before affixing the GPS antenna.
Installing the microphone English • Install the microphone in a place where its direction and distance from the driver make it easiest to pick up the driver’s voice. • Be sure to turn off (ACC OFF) the product before connecting the microphone. • Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column.
© 2022 PIONEER CORPORATION UC
RDS AV RECEIVER RÉCEPTEUR AV AVEC RDS RECEPTOR AV RDS DMH-W2770NEX DMH-W2700NEX Quick start guide Guide de démarrage rapide Guía de inicio rápido CAN ICES-3 B/NMB-3 B
English This guide is intended to guide you through the basic functions of this unit. For details, please refer to the Operation manual stored on the website. https://www.pioneerelectronics.com/PUSA/ https://www.pioneerelectronics.ca/POCEN/ Français Ce guide est destiné à vous guider dans les fonctions de base de cet appareil. Pour les détails, veuillez vous reporter au Mode d’emploi disponible sur le site Web. https://www.pioneerelectronics.com/PUSA/ https://www.pioneerelectronics.
English Precaution Information to user –This device contains licence-exempt transmitter(s)/receiver(s) that complies with Part 15 of FCC Rules and Innovation, Science, and Economic Development Canada licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. –The Bluetooth antenna cannot be removed (or replaced) by user.
–This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. –Information to User - Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. –NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• Do not ingest the battery, Chemical Burn Hazard. The remote control supplied or sold separately with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed or placed inside any part of the body, it can cause severe internal burns or other severe injuries in 2 hours or less and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
English Preparing the remote control (DMH-W2770NEX) Remove the insulation sheet before use. How to replace the battery Insert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly. WARNING Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION • Remove the battery if the remote control is not used for a month or longer. • There is a danger of explosion if the battery is incorrectly replaced.
Meanings of symbols used in this manual Touch Touch and slide Touch and hold What’s What Display off Power off Display the top menu screen Mute or unmute Activate the voice recognition mode Display mobile device search screen VOL (+/-) Adjust the volume
Selecting the source 6/10 Sun 12:48 Radio Apple CarPlay Android Auto USB iPod SiriusXM Bluetooth Audio Phone Select a source Display hidden sources
Tuner operation Store the strongest broadcast frequencies Select a band Tune into the next station Recall the preset channel stored to a key from memory Store the current broadcast frequency to a key Recall a preset channel in order and broadcast each channel for 10 seconds.
Moving images operation Pause and start playback Change the playback point Selects the previous file or the next file. Performs fast forward or fast reverse. Touch again to change the playback speed.
Audio operation Pause and start playback Selects the previous file or the next file. Performs fast forward or fast reverse. Touch again to change the playback speed.
List search operation USB Abcdefghijk ROOT 99 / 99 99:99 99:99 USB video folder abcdefghi abcdefghi abcdefghi abcdefghi # . A . G . M . S . Y .
Bluetooth® connection 1 2 [Yes] or . the Bluetooth device name. NOTE The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.
PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (Pioneer) warrants that Pioneer® Car/Marine Electronics, Speaker, and Accessory Products distributed by Pioneer in the U.S.A.
PIONEER ELECTRONICS (USA) INC. GARANTIE LIMITÉE GARANTIE VALIDE UNIQUEMENT DANS LE PAYS D’ACHAT DU PRODUIT GARANTIE Pioneer Electronics (USA) Inc.
