Operation Manual CD RDS RECEIVER DEH-X5600BT DEH-4600BT English
Section 01 Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. If you want to dispose this product, do not mix it with general household waste.
Section Using this unit 02 Head unit connected directly to the unit will protrude out from the unit, which could be dangerous. DEH-X5600BT 5 6 Display indication DEH-X5600BT 2 3 1 78 9 ab c de DEH-4600BT 21 3 4 b 5 Using this unit 123 4 6 4 5 6 8 a c 7 9 b d DEH-4600BT c 4 78 9 a SRC/OFF 2 h (eject) 3 MULTI-CONTROL (M.C.
Section Using this unit 02 (iPod control) This unit’s iPod function is operated from your iPod. c d (Bluetooth indicator) Set up menu 1 After installation of this unit, turn the ignition switch to ON. SET UP appears. 2 Turn M.C. to switch to YES. # If you do not use the unit for 30 seconds, the set up menu will not be displayed. # If you prefer not to set up at this time, turn M.C. to switch to NO. 3 Press M.C. to select. 4 Follow these steps to set the menu.
Section Using this unit Frequently used menu operations Using this unit Removing the front panel 1 Press the detach button to release the front panel. 2 Push the front panel upward (M) and then pull it toward (N) you. 02 Returning to the previous display Returning to the previous list (the folder one level higher) 1 Press /DIMMER. Returning to the ordinary display Canceling the main menu 1 Press BAND/ . 3 Always store the detached front panel in a protective case or bag.
Section 02 Using this unit Storing and recalling stations for each band Using preset tuning buttons 1 To store: Press and hold down one of the preset tuning buttons (1/ to 6/ ) until the number stops flashing. 2 To recall: Press one of the preset tuning buttons (1/ to 6/ ).
Section Using this unit REGIONAL (regional) When AF is used, the regional function limits the selection of stations to those broadcasting regional programs. 1 Press M.C. to turn the regional function on or off. LOCAL (local seek tuning) Local seek tuning allows you to tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to select the desired setting.
Section 02 Using this unit Operations using the MIXTRAX button Turning MIXTRAX on or off Only for DEH-X5600BT You can use this function when USB is selected as the source. You cannot use this function with USB MTP. 1 Press 3/MIX to turn MIXTRAX on or off. ! For more details about MIXTRAX, refer to About MIXTRAX on page 21. ! When MIXTRAX is in use, the sound retriever function is disabled.
Section Using this unit Operations using special buttons Playing tracks in random order 1 Press 5/ to turn random play on or off. Tracks in a selected repeat range are played in random order. ! To change songs during random play, press d to switch to the next track. Pressing c restarts playback of the current track from the beginning of the song. Pausing playback 1 Press 4/PAUSE to pause or resume. Enhancing compressed audio and restoring rich sound (sound retriever) Only for DEH-4600BT 1 Press 3/S.
Section Using this unit 02 Browsing for a song 1 Press to switch to the top menu of list search. 2 Use M.C. to select a category/song. Changing the name of the song or category 1 Turn M.C. Playlists—artists—albums—songs—podcasts— genres—composers—audiobooks Playing 1 When a song is selected, press M.C. Viewing a list of songs in the selected category 1 When a category is selected, press M.C. Playing a song in the selected category 1 When a category is selected, press and hold M.C.
Section Using this unit ! GENRE – Plays an album from the genre currently being played. Notes ! The selected song/album may be canceled if you use functions other than link search (e.g. fast forward and reverse). ! Depending on the song selected to play, the end of the currently playing song and the beginning of the selected song/album may be cut off. Using this unit’s iPod function from your iPod This unit’s iPod function can be controlled by using the connected iPod.
Section 02 Using this unit Important Use of third party apps may involve or require the provision of personally identifiable information, whether through the creation of a user account or otherwise, and for certain applications, the provision of geolocation data. ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES.
Section Using this unit Basic operations Fast forwarding or reversing 1 Press and hold c or d. Pausing playback 1 Press BAND/ to pause or resume. Switching the display Selecting the desired text information 1 Press DISP to cycle between the following: ! TRACK INFO (track title/artist name/album title) ! APP NAME (application name) ! ELAPSED TIME (playback time) ! CLOCK (source name and clock) ! SPEANA (spectrum analyzer) Function settings 1 Press M.C. to display the main menu. 2 Turn M.C.
Section Using this unit 02 Adjusting the other party’s listening volume 1 Press c or d while talking on the phone. ! When private mode is on, this function is not available. Turning private mode on or off 1 Press BAND/ while talking on the phone. Note If private mode is selected on the cellular phone, hands-free phoning may not be available. Storing and recalling phone numbers 1 To store: Press and hold down one of the preset tuning buttons (1/ to 6/ ).
Section Using this unit DEVICELIST (connecting or disconnecting a device from the device list) DEL DEVICE (deleting a device from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to display DELETE YES. 4 Press M.C. to delete the device information from the device list.
Section Using this unit 02 You must enter a PIN code on your device to confirm the Bluetooth connection. The default code is 0000, but you can change it with this function. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select a number. 3 Press M.C. to move the cursor to the next position. 4 After inputting PIN code, press and hold M.C. ! After inputting, pressing M.C. returns you to the PIN code input display, and you can change the PIN code. DEV.
Section Using this unit R.TONE (ring tone select) 02 Bluetooth audio player. You will need to pair this unit with your Bluetooth audio player. PB INVT (phone book name view) 1 Press M.C. to invert the order of names in the phone book. 1 Connection Use the Bluetooth telephone connection menu. Refer to Connection menu operation on page 14.
Section Using this unit 02 Pausing playback 1 Press 4/PAUSE to pause or resume. Enhancing compressed audio and restoring rich sound (sound retriever) Only for DEH-4600BT 1 Press 3/S.Rtrv to cycle between: 1—2—OFF (off) 1 is effective for low compression rates, and 2 is effective for high compression rates. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function.
Section Using this unit 02 SLA (source level adjustment) Loudness compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. 1 Press M.C. to select the desired setting. OFF (off)—LOW (low)—MID (mid)—HI (high) This function prevents the volume from changing too dramatically when the source switches. ! Settings are based on the FM volume level, which remains unchanged. ! The MW/LW volume level can also be adjusted with this function.
Section 02 Using this unit 1 Press M.C. to display the setting mode. 2 Press M.C. to select the segment of the clock display you wish to set. Hour—Minute 3 Turn M.C. to adjust the clock. Switching this function on enables you to reduce the consumption of battery power. ! Turning on the source is the only operation allowed when this function is on. 1 Press M.C. to turn the power save on or off. 12H/24H (time notation) BT MEM CLEAR (clearing the Bluetooth device data stored on this unit) 1 Press M.C.
Section Using this unit 02 ILLUMI FX (illumination effect mode) 3 Turn M.C. to select the illumination function. Once selected, the following audio functions can be adjusted. In this mode, an illumination effect can be seen on the display at certain times such as when the ACC power is turned on/off or a CD is inserted/ejected. 1 Press M.C. to turn ILLUMI FX on or off. ! The illumination effect will activate when the ACC power is turned on/off regardless of whether the ILLUMI FX setting is on or off.
Section Using this unit 02 MIXTRAX technology is used to insert a variety of sound effects in between songs, allowing you to experience your music as a nonstop mix complete with visual effects. Notes ! Depending on the file/song, sound effects may not be available. ! Turn MIXTRAX off if the visual effects it produces have adverse effects on driving. Refer to Operations using the MIXTRAX button on page 8. MIXTRAX menu 1 Press M.C. to display the main menu. 2 Turn M.C.
Section Using this unit Initial menu 2 Press and hold SRC/OFF until the main menu appears in the display. 3 Turn M.C. to change the menu option and press to select INITIAL. 4 Turn M.C. to select the initial menu function. Once selected, the following initial menu functions can be adjusted. FM STEP (FM tuning step) 1 Press M.C. to select the FM tuning step. 100 (100 kHz)—50 (50 kHz) S/W UPDATE (updating the software) This function is used to update this unit with the latest Bluetooth software.
Section Using this unit 02 If an unwanted display appears Turn off the unwanted display using the procedures listed below. 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select SYSTEM. 3 Turn M.C. to display DEMO OFF and press to select. 24 4 Turn M.C. to switch to YES. 5 Press M.C. to select.
Appendix Additional information Troubleshooting Symptoms are written in bold and causes in regular, non-indented text. Regular, indented text is used to indicate actions to be taken. The display automatically returns to the ordinary display. You did not perform any operation within about 30 seconds. Perform operation again. Error messages The repeat play range changes unexpectedly.
Appendix Additional information ERROR-23 Unsupported CD format. Replace the disc. FORMAT READ Sometimes there is a delay between the start of playback and when you start to hear any sound. Wait until the message disappears and you hear sound. NO AUDIO The inserted disc does not contain any playable files. Replace the disc. SKIPPED The inserted disc contains DRM protected files. The protected files are skipped. PROTECT All the files on the inserted disc are embedded with DRM. Replace the disc.
Appendix Additional information iPod failure. Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it. START UP APP The application has not started running yet. Follow the instructions that appear on the screen. NOT FOUND No related songs. Transfer songs to the iPod. Handling guidelines Discs and player Use only discs that feature either of the following two logos. Bluetooth device ERROR-10 The power failed for the Bluetooth module of this unit.
Appendix Additional information Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions, and so on. Road shocks may interrupt disc playback. When using discs that can be printed on label surfaces, check the instructions and the warnings of the discs. Depending on the discs, inserting and ejecting may not be possible. Using such discs may result in damage to this equipment.
Appendix Additional information ! You cannot use this function with USB MTP. Supplemental information Russian text to be displayed on this unit should be encoded in one of the following character sets: ! Unicode (UTF-8, UTF-16) ! A character set other than Unicode that is used in a Windows environment and is set to Russian in the multi-language setting This unit may not work properly depending on the application used to encode WMA files.
Appendix Additional information Users of iPod with the Dock Connector should use CD-IU51. For details, consult your dealer. About the file/format compatibility, refer to the iPod manuals. Audiobook, Podcast: Compatible However, depending on the system environment, you may not be able to specify the playback sequence. For USB portable audio players, the sequence is different and depends on the player.
Appendix Additional information Copyright and trademark iTunes Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. Androidä Android is a trademark of Google Inc. MIXTRAX MIXTRAX is a trademark of the PIONEER CORPORATION. MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e.
Appendix Additional information Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative type Maximum current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ......................................... 178 mm × 50 mm × 165 mm Nose ............................................... 188 mm × 58 mm × 15 mm (DEH-X5600BT) Nose .....................................
En 33
En
En 35
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN Корпорация Пайонир 1-1, Син-Огура, Сайвай-ку, г. Кавасаки, префектура Канагава, 212-0031, Япония Импортер ООО “ПИОНЕР РУС” 125040, Россия, г. Москва, ул. Правды, д.26 Тел.: +7(495) 956-89-01 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
