Owner's Manual

ManualsBrandsPioneer ManualsBlu-ray PlayerElite BD-Live Blu-ray Disc Player

Operating Instructions

Blu-ray Disc PLAYER

23FD_UXJCA_EN.book 1 ページ２００９年３月３日　火曜日　午後６時４８分

Summary of content (66 pages)

PAGE 1
23FD_UXJCA_EN.
PAGE 2
3FD_UXJCA_EN.book 2 ページ２００９年３月３日火曜日午後６時４８分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
PAGE 3
23FD_UXJCA_EN.book 3 ページ２００９年３月３日火曜日午後６時４８分 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
PAGE 4
23FD_UXJCA_EN.
PAGE 5
23FD_UXJCA_EN.book 5 ページ２００９年３月３日火曜日午後６時４８分 We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
PAGE 6
23FD_UXJCA_EN.book 6 ページ２００９年３月３日火曜日午後６時４８分 Contents 01 Before you start What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Putting the batteries in the remote control. . . . . . . . . . 7 Software updating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Types of discs/files that can be played. . . . . . . . . . . . . . . 8 Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Playable files . . . . . . . . . . . . . . . .
PAGE 7
23FD_UXJCA_EN.book 7 ページ２００９年３月３日火曜日午後６時４８分 Chapter 1 01 Before you start What’s in the box • Remote control x 1 • Video/audio cable (yellow/white/red plugs) x 1 • Do not heat batteries, disassemble them, or throw them into flames or water. • Batteries may have different voltages, even if they look similar. Do not use different kinds of batteries together.
PAGE 8
23FD_UXJCA_EN.book 01 8 ページ２００９年３月３日火曜日午後６時４８分 Types of discs/files that can be played Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played.
PAGE 9
23FD_UXJCA_EN.book 9 ページ２００９年３月３日火曜日午後６時４８分  Discs that cannot be played – Blu-ray Disc Read-Only (ROM) Format Version 2 • HD DVDs – Blu-ray Disc Recordable (R) Format Version 2 • DVD Audio discs – Blu-ray Disc Rewritable (RE) Format Version 3 • DVD-RAM discs • SACDs • Video CDs • SVCDs It is possible that some discs other than the ones listed above may not be playable either. This player conforms to NTSC standards.
PAGE 10
23FD_UXJCA_EN.book 01 10 ページ２００９年３月３日火曜日午後６時４８分  Playing DVDs This label indicates playback compatibility with DVD-RW discs recorded in VR format (Video Recording format). However, for discs recorded with a record-only-once encrypted program, playback can only be achieved using a CPRM compatible device. The AVCHD is a high definition (HD) digital video camera recorder format recording high-definition onto certain media by using highly efficient codec technologies.
PAGE 11
23FD_UXJCA_EN.book 11 ページ２００９年３月３日火曜日午後６時４８分 Part Names and Functions Remote Control STANDBY/ON OPEN/CLOSE 1 7 VIDEO SELECT – (page 22) 8 HOME MEDIA GALLERY – (page 31) 9 TOP MENU – Press to display the top menu of the BDROM or DVD-Video. 01 10 /// – Use to select items, change settings and move the cursor. ENTER – Press to execute the selected item or enter a setting that has been changed, etc.
PAGE 12
23FD_UXJCA_EN.book 01 12 ページ２００９年３月３日火曜日午後６時４８分 Front Panel 1 2 3 4 1  STANDBY/ON – Press to turn the power on and off. When the power is on, the indicator is lit. 2 FL OFF indicator – Lights when the player’s front panel display is turned off pressing FL DIMMER. 3 / – Press to skip to the beginning of the previous title/chapter/track/file. Press and hold to start reverse scanning (page 25).
PAGE 13
23FD_UXJCA_EN.book 13 ページ２００９年３月３日火曜日午後６時４８分 Rear Panel 01 1 2 VIDEO OUT 3 COMPONENT VIDEO Y CENTER SUB WOOFER VIDEO DIGITAL OUT RS-232 C L PB R PR L AC IN R 9 LAN (100) USB (BD STORAGE) HDMI OUT 8 7 6 OPTICAL CONTROL IN 5 4 FRONT SURROUND AUDIO OUT(7.1 ch) SURROUND BACK 1 AUDIO OUT (7.
PAGE 14
23FD_UXJCA_EN.book 02 14 ページ２００９年３月３日火曜日午後６時４８分 Chapter 2 Connecting up Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. After connecting, make the settings at the Setup Navigator menu according to the type of cable connected (page 19). capabilities, allowing natural colors to be reproduced more faithfully than ever. “x.v.
PAGE 15
23FD_UXJCA_EN.book 15 ページ２００９年３月３日火曜日午後６時４８分 • The following restrictions apply when HDMI High Speed Transmission is set to Off: – Deep Color signals are not output. – If the output video resolution is set to Auto, the signals are output with a resolution of 1080/60i when TV’s preferred resolution is 1080/60p. – When the output video resolution is set to 480i or 480p, Dolby TrueHD and DTS-HD Master Audio audio signals are output as Dolby Digital, DTS Digital Surround or linear PCM signals.
PAGE 16
23FD_UXJCA_EN.book 02 16 ページ２００９年３月３日火曜日午後６時４８分 terminal using an HDMI cable, and when the player is set as follows (page 39): HDMI Audio Out: PCM KURO LINK: On PQLS: Auto • Please see the Pioneer website for AV receivers or amplifiers that support the PQLS function. VIDEO OUT  About connections to components of other makes supporting the KURO LINK function The functions listed below work when a TV or AV system (AV receiver or amplifier, etc.
PAGE 17
23FD_UXJCA_EN.book 17 ページ２００９年３月３日火曜日午後６時４８分 Connecting video and audio cables Connecting an AV receiver or amplifier using audio cables When connecting to a 7.1-channel compatible AV receiver or amplifier – Connect using 4 audio cables (diagram below). Note • Make the settings in the Setup Navigator menu according to the type of cable connected (page 19).
PAGE 18
23FD_UXJCA_EN.book 02 18 ページ２００９年３月３日火曜日午後６時４８分 Network connection Note • Devices formatted with a file system other than the above cannot be used. Such devices may however be usable if they are formatted from the player. • External storage devices may not be recognized if they contain multiple partitions. • Some external storage devices may not operate with this player. • Operation of external storage devices (USB memory devices, external hard disks, etc.) is not guaranteed.
PAGE 19
23FD_UXJCA_EN.book 19 ページ２００９年３月３日火曜日午後６時４８分 Chapter 3 03 Getting Started Making settings using the Setup Navigator menu 3 Select the OSD language. Use / to select, then press ENTER. Setup Navigator BD PLAYER Please select the on-screen display language. Be sure to perform these settings when using the player for the first time. Caution • Before turning on the power, check that the connections between the player and other devices are correct.
PAGE 20
23FD_UXJCA_EN.book 03 20 ページ２００９年３月３日火曜日午後６時４８分 – When connecting using component video cables or a video cable to watch the picture, connect to an AV receiver or amplifier, or a TV using either analog audio cables (7.1 channels or 2 channels), an optical digital audio cable (page 17). – To listen to audio with the player connected to an AV receiver or amplifier with an HDMI cable, connect the TV to the AV receiver or amplifier using an HDMI cable (page 16).
PAGE 21
23FD_UXJCA_EN.book 21 ページ２００９年３月３日火曜日午後６時４８分 Note • The factory setting is 00 (PIONEER). • If you make a mistake when inputting the code, release TV CONTROL  then start over from the beginning. • When there are multiple codes for a manufacturer, try inputting them in the indicated order until the TV can be operated. 2 Check that the TV can be operated. Operate the TV using TV CONTROL.  – Press to turn the TV’s power on and off. INPUT SELECT – Press to switch the TV’s input.
PAGE 22
23FD_UXJCA_EN.book 03 1 22 ページ２００９年３月３日火曜日午後６時４８分 Display the TOOLS menu. TOOLS. Press BD PLAYER TOOLS Angle Audio Subtitle Audio Adjust Video Adjust 2 Select and set the item. Use / to select, then press ENTER. Switching the video output terminal to be viewed Use the procedure below to switch the video output signal to be viewed between the HDMI OUT terminal and an analog output terminal (COMPONENT VIDEO or VIDEO output terminals).
PAGE 23
FD_UXJCA_EN.book 23 ページ２００９年３月３日火曜日午後６時４８分 • The picture may not be displayed for a while when the resolution is switched. ENTER CLEAR SECONDARY AUDIO VIDEO OUTPUT RESOLUTION DISPLAY POPUP MENU MENU  Press OUTPUT RESOLUTION. • The current output video resolution setting is displayed on the TV screen and on the player’s front panel display. To switch the output video resolution, press OUTPUT RESOLUTION again or press /.
PAGE 24
23FD_UXJCA_EN.book 04 24 ページ２００９年３月３日火曜日午後６時４８分 Chapter 4 Playback Playing discs or files This section describes the player’s main operations. For the types of discs that can be played, see Playable discs on page 8. For the types of files that can be played, see Playable files on page 10. Image and audio files recorded on discs are played with the Home Media Gallery (page 31). STANDBY/ON OPEN/CLOSE CH AUDIO SUBTITLE • DVD-Video discs have parental lock features.
PAGE 25
23FD_UXJCA_EN.book 25 ページ２００９年３月３日火曜日午後６時４８分 Forward and reverse scanning  During playback, press  or . • The scanning speed switches each time the button is pressed. The speed steps depend on the disc or file (the speed is displayed on the TV screen). Switching the camera angles  • Forward or reverse scanning is also possible by holding the button down. Normal playback resumes when the button is released.
PAGE 26
23FD_UXJCA_EN.book 04 26 ページ２００９年３月３日火曜日午後６時４８分 Switching the audio and secondary audio  Turning the Secondary Video off For discs or files on which multiple audio streams/ channels are recorded, audio streams/channels can be switched during playback. Also use this procedure to switch the secondary audio for BD-ROMs on which secondary audio is recorded. Displaying the disc information  During playback, press AUDIO.
PAGE 27
23FD_UXJCA_EN.book 27 ページ２００９年３月３日火曜日午後６時４８分 Playback functions 04 The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below.
PAGE 28
23FD_UXJCA_EN.book 04 28 ページ２００９年３月３日火曜日午後６時４８分 Using the Play Mode functions Playing a specific title, chapter or track (Search) 1 Press PLAY MODE to display the Play Mode screen. The Play Mode screen can also be displayed by selecting Play Mode from the TOOLS menu. 2 Select the type of search. Use / to select, then press ENTER. ENTER CLEAR OUTPUT RESOLUTION SECONDARY AUDIO VIDEO See the table on page 30 for the search types.
PAGE 29
23FD_UXJCA_EN.book 29 ページ２００９年３月３日火曜日午後６時４８分 Note • A-B Repeat play is canceled in the following cases: – When the angle is switched (for BD-ROM and DVDVideo discs only). – When you search outside the repeat range. – When you start other Repeat Play or Random Play. • During playback, press  STOP or CLEAR. 04 Note • Random Play is canceled in the following cases: – When you use the search function. – When you start Repeat Play.
PAGE 30
23FD_UXJCA_EN.book 04 30 ページ２００９年３月３日火曜日午後６時４８分 About Play Mode types The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below. Disc/file type Play Mode type Repeat Play Random Play Search 1. 2. 3. 4. 5. 6.
PAGE 31
23FD_UXJCA_EN.book 31 ページ２００９年３月３日火曜日午後６時４８分 Playing from the Home Media Gallery The Home Media Gallery lets you display a list of the titles, tracks or files recorded on the disc. The discs that can be played from the Home Media Gallery are as shown below (see also page 8). • BD-R/-RE discs • DVD-R/-RW (VR format) discs • Audio CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which only data files of image or audio files, etc.
PAGE 32
23FD_UXJCA_EN.book 04 32 ページ２００９年３月３日火曜日午後６時４８分  Rotating images  Adding tracks/files  Press ANGLE while playing a slideshow. • The image rotates each time the button is pressed (90°  180°  270°  0°  ... ). The image can also be rotated by selecting Rotate from the TOOLS menu. Use this procedure to add tracks and files, and create the HMG Playlist. Playing audio files 1 Press HOME MEDIA GALLERY to display the Home Media Gallery.
PAGE 33
23FD_UXJCA_EN.book 33 ページ２００９年３月３日火曜日午後６時４８分  Playing the HMG Playlist 04 1 Press HOME MEDIA GALLERY to display the Home Media Gallery. The Home Media Gallery can also be displayed by selecting Home Media Gallery from the Home Menu pressing ENTER. 2 Select HMG Playlist. Use / to select, then press ENTER. 3 Select the track/file to be played. Use / to select, then press ENTER. Playback starts from the selected track/file, and continues until the end of the list is reached.
PAGE 34
23FD_UXJCA_EN.book 05 34 ページ２００９年３月３日火曜日午後６時４８分 Chapter 5 Adjusting audio and video Adjusting the video The quality of the playback picture can be adjusted according to the TV you are using. TOOLS TOP MENU ENTER HOME MENU RETURN PLAY PREV PAUSE STOP NEXT RED GREEN BLUE YELLOW VIDEO ADJUST 1 During playback, press VIDEO ADJUST to display the Video Adjust screen. The Video Adjust screen can also be displayed by selecting Video Adjust from the TOOLS menu. 2 Select a preset.
PAGE 35
23FD_UXJCA_EN.book 35 ページ２００９年３月３日火曜日午後６時４８分 • Prog.Motion is disabled when Pure Cinema is set to On. 05 Note • Black Setup has the effect only for pictures output from the VIDEO output terminals. • This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby Digital audio signals of BDs and DVDs. • YNR, CNR, BNR and MNR have no effect on 1080/24p video signals output from the HDMI OUT terminal.
PAGE 36
23FD_UXJCA_EN.book 05 36 ページ２００９年３月３日火曜日午後６時４８分 – Channel Level is set to Fix (page 38).  Closing the Channel Level screen Press HOME MENU. Adjusting the audio delay (Lip Sync) Adjust the audio delay for the selected video output terminal if the video and audio are not synchronized. 1 During playback, display the TOOLS menu. Press TOOLS. 2 Select and set Audio Adjust. Use / to select, then press ENTER. 3 Select and set Lip Sync. Use / to select, then press ENTER.
PAGE 37
23FD_UXJCA_EN.book 37 ページ２００９年３月３日火曜日午後６時４８分 Chapter 6 06 Advanced settings Changing the settings Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. ENTER CLEAR OUTPUT RESOLUTION SECONDARY AUDIO VIDEO VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU TOOLS TOP MENU 2 Select and set Initial Setup. Use / to select, then press ENTER. 3 Select the item and change the setting.
PAGE 38
23FD_UXJCA_EN.book 38 ページ２００９年３月３日 Setting 06 Options Explanation Audio Out Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive audio are mixed for output. Dolby Digital  PCM Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio signals for output. DTS  PCM AAC Out AAC * Only valid for the DIGITAL OUT terminal.
PAGE 39
23FD_UXJCA_EN.book 39 ページ２００９年３月３日火曜日午後６時４８分 HDMI Setting Options Explanation HDMI High Speed Transmission On Select this when connected with a High Speed HDMI™ cable (page 14). Off Select this when connected with a Standard HDMI™ cable (page 14). 06 The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High Speed Transmission setting.
PAGE 40
23FD_UXJCA_EN.book 06 40 ページ２００９年３月３日火曜日午後６時４８分 Language Setting Options OSD Language English Select this to set the language of the on-screen displays to English. available languages Choose a language for the on-screen displays from the listed languages. Audio Language English * For some discs, it may not be possible to change to the available languages selected language. Other Explanation Select this to set both the BD-ROM and DVD-Video default audio language to English.
PAGE 41
23FD_UXJCA_EN.book 41 ページ２００９年３月３日火曜日午後６時４８分 Playback Setting Options Explanation Still Picture Field This eliminates instability of the picture when playback is paused. Frame This makes pictures clear when playback is paused, but instability may be observed. Auto Field or Frame is switched automatically according to the disc or file being played. On Select this to display the angle mark, secondary video mark and secondary audio mark on the TV screen (pages 25 and 26).
PAGE 42
23FD_UXJCA_EN.book 06 42 ページ２００９年３月３日火曜日午後６時４８分  Changing the speaker setup Set whether or not speakers are connected to an AV receiver or amplifier, etc., their size and their crossover frequency. This setting is only valid for the AUDIO OUT terminals. When there are no speakers whose speaker size is set to Small, select Bypass for the crossover frequency. When there are speakers whose speaker size is set to Small, select the crossover frequency (Bypass cannot be selected).
PAGE 43
23FD_UXJCA_EN.book 43 ページ２００９年３月３日火曜日午後６時４８分 2 Select and set the method for switching the speaker to be adjusted. Use / to select, then press ENTER. 06 • Auto Set DNS Server Address • Auto – Switch the speaker to be adjusted automatically. On – The DNS server’s IP address is obtained automatically. • Manual – Switch the speaker to be adjusted manually. Off – The DNS server’s IP address must be set manually.
PAGE 44
23FD_UXJCA_EN.book 44 ページ２００９年３月３日火曜日午後６時４８分 • If you want to enter two characters in succession that are both on the same button (for example a P and an R), press  after inputting the first character then input the second character. 06 • Use CLEAR to delete the last character. • Use / to move the displayed characters when all the input characters cannot be displayed. 5 6 Key Characters Key Characters 1 1.
PAGE 45
23FD_UXJCA_EN.book 45 ページ２００９年３月３日火曜日午後６時４８分 When a disc name is selected, the data downloaded with the BD-LIVE function and data used with the BONUSVIEW is erased. 1 Select and set Parental Lock  DVD-Video Parental Lock  Next Screen. Use / to select, then press ENTER. When Shared Data is selected, all the data downloaded with the BD-LIVE function and not associated to discs is erased. 2 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set.
PAGE 46
23FD_UXJCA_EN.book 06 46 ページ２００９年３月３日火曜日午後６時４８分  Setting the output terminals Set the terminals from which the player’s video and audio signals are to be output. 1 Select and set Options  Output Terminal  Next Screen. Use / to select, then press ENTER. 2 Select and set the video and audio output terminals. Select the actually connected video and audio output terminals. Use /// to select, then press ENTER. For details on the settings, refer to step 4 on page 19.
PAGE 47
23FD_UXJCA_EN.book 47 ページ２００９年３月３日火曜日午後６時４８分 About the audio output settings 06 The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table below. Caution • When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT terminal or DIGITAL OUT terminal (pages 19 and 46).
PAGE 48
23FD_UXJCA_EN.book 06 48 ページ２００９年３月３日火曜日午後６時４８分 9. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream, depending on HDMI High Speed Transmission setting and/or the connected HDMI device (page 14). 10. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in linear PCM (7.1 channels) or DTS Digital Surround bitstream.
PAGE 49
23FD_UXJCA_EN.
PAGE 50
23FD_UXJCA_EN.book 07 50 ページ２００９年３月３日 Additional information The licenses for the software used on this player are shown below.
PAGE 51
23FD_UXJCA_EN.book 51 ページ２００９年３月３日 copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license. 4. Contacts There are two mailing lists related to FreeType: • freetype@nongnu.
PAGE 52
23FD_UXJCA_EN.book 07 52 En 52 ページ２００９年３月３日 It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software. (Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations will support it.
PAGE 53
23FD_UXJCA_EN.book 53 ページ２００９年３月３日 designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
PAGE 54
23FD_UXJCA_EN.book 07 54 ページ２００９年３月３日 should have at least the “copyright” line and a pointer to where the full notice is found. Copyright © This program is free software; you can redistribute it and/ or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
PAGE 55
23FD_UXJCA_EN.book 55 ページ２００９年３月３日 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
PAGE 56
23FD_UXJCA_EN.book 07 56 ページ２００９年３月３日火曜日午後６時４８分 Cautions on use Moving the player If you need to move this unit, first remove the disc if there’s one loaded, and close the disc tray. Next, press  STANDBY/ON to switch the power to standby, checking that the POWER OFF indication on the front panel display goes off. Wait at least 10 seconds. Lastly, disconnect the power cord. Never lift or move the unit during playback — discs rotate at a high speed and may be damaged.
PAGE 57
23FD_UXJCA_EN.book 57 ページ２００９年３月３日火曜日午後６時４８分 Do not glue paper or put stickers onto the disc, or use a pencil, ball-point pen or other sharp-tipped writing instrument. These could all damage the disc. Do not use benzene, thinner or other volatile chemicals. Also do not use record spray or antistatic agents. 07 For tough dirt, apply some water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe off the moisture with a dry cloth.
PAGE 58
23FD_UXJCA_EN.book 07 58 ページ２００９年３月３日 Problem 火曜日午後６時４８分 Check No picture is displayed or the Is the video cable properly picture is not displayed connected? properly. Remedy • Connect the cable properly according to the connected devices (page 14). • Insert the cable firmly and all the way in. Is the video cable damaged? If the cable is damaged, replace it with a new one.
PAGE 59
23FD_UXJCA_EN.book 59 ページ２００９年３月３日火曜日午後６時４８分 Problem Check Sound and picture are not synchronized. Is Output Terminal properly Set Output Terminal properly (pages 19 and 46). set? • No sound is output. • Sound is not output properly. Is the disc played back in No sound is output during slow motion play and forward and reverse scanning.
PAGE 60
23FD_UXJCA_EN.book 07 60 ページ２００９年３月３日 Check Secondary audio or interactive audio is not output. Is HDMI Audio Out properly When listening to the sound from an HDMI OUT terminal, set HDMI set? Audio Out to PCM (page 39). Are Dolby Digital Out and DTS Out properly set? When listening to the sound from an DIGITAL OUT terminal, set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 38). Sound is fast or slow.
PAGE 61
23FD_UXJCA_EN.book 61 ページ２００９年３月３日火曜日午後６時４８分 KURO LINK 07 Problem Check Remedy KURO LINK function does not work. Is the HDMI cable properly connected? To use the KURO LINK function, connect the Flat Panel TV and AV system (AV receiver or amplifier, etc.) to the HDMI OUT terminal (page 16). Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function may not work properly if HDMI cable other than a High Speed HDMI™ cable is used.
PAGE 62
23FD_UXJCA_EN.book 07 62 ページ２００９年３月３日 Problem 火曜日午後６時４８分 Check Remedy Software updating is slow. Depending on the Internet connection and other conditions, some time may be required to update the software. • “WRT NG ****” is displayed on the front panel display during software updating. (**** meaning any characters) • “WRT FAILED” is displayed on the front panel display during software updating. The message is displayed when software updating has failed.
PAGE 63
23FD_UXJCA_EN.book 63 ページ２００９年３月３日 Problem 火曜日午後６時４８分 Check Remedy Settings you have made have • Have you disconnected the been cleared. power cord while the player’s power was on? • Has there been a power failure? Always press  STANDBY/ON on the player’s front panel or  STANDBY/ON on the remote control and check that POWER OFF has turned off from the player’s front panel display before disconnecting the power cord.
PAGE 64
23FD_UXJCA_EN.book 07 64 ページ２００９年３月３日火曜日午後６時４８分  Dolby TrueHD  MPEG (Moving Picture Experts Group) Dolby TrueHD is an audio format using lossless coding. With BDROMs, up to 8 channels can be recorded at 96 kHz/24 bits, or up to 6 channels at 192 kHz/24 bits. The name of a family of standards used to encode video and audio signals in a digital compressed format. The video encoding standards include MPEG-1 Video, MPEG-2 Video, MPEG-4 Visual, MPEG-4 AVC, etc.
PAGE 65
23FD_UXJCA_EN.book 65 ページ２００９年３月３日火曜日午後６時４８分 Specifications 07 Model BDP-23FD Type Blu-ray Disc PLAYER Rated voltage AC 120 V Rated frequency 60 Hz Power consumption 32 W Power consumption (standby) 0.3 W Weight 8 lb 3 oz (3.7 kg) External dimensions (including projecting parts) 16 9/16 in. (W) x 3 5/16 in. (H) x 11 5/16 in.
PAGE 66
23FD_UXJCA_EN.book 66 ページ２００９年３月３日火曜日午後６時４８分 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 1–800–421–1404 Please do not ship your product to Pioneer without first calling the Customer Support at the above listed number for assistance. Pioneer Electronics Service, Inc. P.O.