Operational Manual

- 78 -
English
A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R)
position.
Camera View mode also allows you to check what is behind you while driving.
TIP
The parking assist guidelines can be displayed temporarily on the rear view camera screen by touching
the icon at the top left of the screen. The guidelines can be adjusted. For details on how to adjust the
guidelines, see [Parking Assist Guide Adjust] (page 80).
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 29).
[Auto Mix]
Menu Item Description
[Auto Mix]
[On] [Off]
Select whether to perform mixing the sound output from
WebLink and AV source sound automatically.
NOTE
This function is only available when WebLink is used with an
iPhone.
[Input/Output settings]
Menu Item Description
[USB MTP]
[Off] [On]
Select whether or not to activate USB MTP (Media Transfer
Protocol) connection.
[AV Input]
[Source] [Camera] [Off]
Select AV input source (page 72).
[AUX Input]
[On] [Off]
Set to [On] for AUX source (page 70).
[Camera settings]