English Français Español AVH-X5700BHS AVH-X4700BS AVH-X3700BHS AVH-X2700BS AVH-X1700S DVD RDS AV RECEIVER AUTORADIO AV RDS LECTEUR DE DVD RADIO AV RDS CON DVD Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Important (Numéro de série) Le numéro de série se trouve au bas de cet appareil.
Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution ..........................4 Information to User ..........................................
Contents ■ System settings ...............40 Displaying the “System” setting screen ..........40 Activating the Bluetooth audio source ............40 Setting the ever scroll .....................................40 Setting the rear view camera..........................40 Setting the camera for Camera View mode ....41 Turning off the demo screen ...........................41 Selecting the system language ......................41 Setting the keyboard language with the application for iPhone...................
Precaution Information to User ● MODEL NO. : AVH-X5700BHS, AVH-X4700BS, AVHX3700BHS, AVH-X2700BS Contains FCC ID : AJDK071 Contains/Contient IC : 775E-K071 ● This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Precaution BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: ● Do not turn up the volume so high that you can’t hear what’s around you. ● Use caution or temporarily discontinue use in potentially hazardous situations. ● Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
Precaution ● In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake.
Precaution 2 Press the RESET button with a pen tip or other pointed implement. Checking part names and functions on page 8 Settings and recorded contents are reset to the factory settings. About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. HOLD CAUTION This indicates to touch and hold an appropriate soft key on the touch screen.
Basic operation Checking part names and functions X5700BHS 1 2 3 X4700BS 4 5 1 2 3 4 5 6 7 8 6 9 7 8 9 LCD screen Volume (+/–) button DISP On the AV operation screen, press to turn the button display off. On the Application screen or navigation mode, press to display the side control bar. Press and hold to turn the display off. p When the display is turned off, touch the screen to revert to the original screen. Press to display the top menu screen.
Basic operation that angle for safety. ● Do not place a glass or can on the open LCD panel. Insert a disc into the disc-loading slot. Ejecting a disc Adjusting the LCD panel angle X5700BHS 1 Press the X3700BHS Press button. or 2 Touch LCD panel. 3 Touch X4700BS to adjust the angle of the . Returns to the previous screen. Inserting/ejecting/connecting media X2700BS X1700S button to eject a disc.
Basic operation How to use the screens *4 Application menu screen Time and date setting screen 10 Abcdefg Abcdefg Abcdefg Abcdefg 6 2014 Month/Date 6/10 22 Setting menu screen Application operation screen Source Select Top menu screen *1 12hour 24hour *2 6/10 *4 System d/m/y m/d/y y/m/d Time Format 21 48 Depending on the connection method, the "smartphone setup" screen is displayed.
Basic operation *1 *2 *3 *4 *5 The top menu screen of this manual is the screen when using the AppRadioOne. The items displayed on the screen may vary depending on the connecting device or mode. When you connect an iPhone via Bluetooth wireless technology or a smartphone via USB cable, “Smartphone Setup” screen appears by touching [APPS]. By pressing the button on any screen you can display the Top menu screen.
Basic operation If you touch the key, the rest are scrolled for display. 3 Appears when items cannot be displayed on a single page. Drag the scrubber bar or the list to view any hidden items. Operating the time bar X5700BHS -9999’99” 1 Press 2 Touch 1 You can change the playback point by dragging the key. p Playback time corresponding to the position of the key is displayed while dragging the key. Switching the operation panel : Switches the operation panel of AV sources.
Registration and connection of Bluetooth device Switching visibility This function sets whether or not to make this product visible to the other device. 1 Display the “Bluetooth” screen. Displaying the “Bluetooth” screen on page 12 2 Touch [Visibility] to switch “On” (default) or “Off”. Entering the PIN code for Bluetooth wireless connection To connect your Bluetooth device to this product, you need to enter a PIN code. You can change the PIN code with this function. 1 Display the “Bluetooth” screen.
Hands-free phoning X5700BHS X4700BS X3700BHS Bluetooth telephone connected indicator The device number of the connected device is displayed. Reception status of the cellular phone Battery status of the cellular phone Phone Book *1 *2 *3 *4 *5 For your safety, avoid talking on the phone as much as possible while driving. To use this function you need to connect your cellular phone to this product via Bluetooth in advance.
Hands-free phoning Touch to reject the call. 2 Touch to end the call. Minimizing the dial confirmation screen p The dial confirmation screen cannot be minimized on the AV operation screen. p AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call. Touch . Touch again.
Setup for iPod / iPhone or smartphone When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your device. Setting the device connection method on page 16 2 Connect your device to this product.
Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows.
Radio X4700BS X2700BS X1700S Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band. 1 2 3 4 5 6 6/10 Radio FM1 Abcdefghi Abcdefghi 000.00 MHz Performs manual tuning. Performs seek tuning or non stop seek tuning. Releasing the key in a few seconds, skips to the nearest station from the current frequency. Keeping holding the key for a long seconds, performs non stop seek tuning.
HD Radio™ X5700BHS Switches the text display between the main channel and sub channels. Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band. 1 2 3 4 5 6 6/10 HOLD 1 2 3 4 5 6 HOLD Abcdefghi Abcdefghi ᵦᵢ ᵢᵧᵥᵧᵲᵟᵪ 000.0MHz ᵦᵢᵏ Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key.
HD Radio™ Disc Track number indicator Tuning into strong frequencies Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content. Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals. 1 Display the Radio settings screen. Display the Radio settings screen on page 20 Starting procedure 2 Touch [Local].
Disc Hides the touch panel keys. To display again the keys, touch anywhere on the screen. Performs frame-by-frame playback. HOLD Video source screen 2 DVD Performs slow-motion playback.
Disc p By pressing or , you can also skip files/chapters forward or backward. or , you can also perform p By pressing and holding fast reverse or fast forward. appears. p If a Video-CD with PBC On is being played, p Changing the wide screen mode. Common operations on page 51 You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product. Searching for the part you want to play p For DVD-Videos, you can select [Title], [Chapter] or [10Key].
Compressed audio files Playback screen 1 (Example: USB) 6/10 USB ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi ABC Plays files in random order. *1 : Does not play files in random order. *2 : Plays all files within the repeat range in random order. *3 R&B 9999’99” -9999’99” Skips files forward or backward. *4 Displays the link search screen. This function is available for the USB storage device only. Selecting a song in the album (link search) on page 24 Switches the media file type.
Compressed audio files Selecting files from the file name list You can find files or folders to play back using the file name or folder name list. 1 Touch Compressed video files Switches the media file type to video. ● CD-DA: Switches the media file type to CD (audio data (CD-DA)). ● Photo: Switches the media file type to still image (JPEG data). Hides the touch panel keys. To display again the keys, touch anywhere on the screen. . 2 Touch a file on the list to play back.
Compressed video files (Example: Disc) 6/10 ROM 21 48 Abcdefghi Full 9999 99999 01 9999’99” *3 Starting procedure Hides the touch panel keys. Compressed audio files on page 23 To display again the keys, touch anywhere on the screen. Selecting files from the file name list Stop Abcdefghi Still image files Pause OFF ᵏᵍᵐ -9999’99” Performs fast reverse or fast forward. You can select files to view using the file name list. 1 Touch . 2 Touch a file on the list to play back.
Still image files 6/10 USB 21 48 Plugging and unplugging a USB storage device on page 9 p Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. 3 Touch [USB]. The image is displayed on the screen. Abcdefghi Abcdefghi Trimming Skips files forward or backward. Switches between playback and pause. *1 Saves the current image as the wallscreen. Saving the image as the wallscreen on page 26 *2 Selects a file from the list.
iPod Audio source screen 1 iPod Plays files in random order. 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 : Plays randomly songs or videos within the selected list. *1 Abcdefghi ABC 6/10 iPod 21 48 Abcdefghi *3 Audio source screen 2 Pops *4 99999/99999 99999/99999 9999’99” : Plays album randomly. *2 Abcdefghi Video source screen -9999’99” Skips files forward or backward. iPod 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Full Abcdefghi 9999’99” -9999’99” Abcdefghi ABC Performs fast reverse or fast forward.
iPod iPod audio and/or video sources are enabled if either of the cables is connected. iPhone with 30-pin connector on page 55 Registering your Bluetooth devices on page 12 For iPod / iPhone with a Lightning connector users Via USB cable p With a USB interface cable for iPod/iPhone (CD-IU52) (sold separately), iPod audio source is available. However, functions related to iPod video files are not available.
iPhone or smartphone applications Using AppRadioOne You can control applications for an iPhone or a smartphone directly from the screen (AppRadioOne). In AppRadioOne, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p In this chapter, iPhone and iPod touch will be referred to as “iPhone”. p The compatible finger gestures vary depending on the application for an iPhone or a smartphone.
Pandora® iPhone or smartphone applications You can view and operate the compatible applications via the display with multi-touch gestures like tapping, dragging, scrolling, and flicking. p Multi-touch gestures may be disabled depending on the MirrorLink device model that is connected. Gives a “Thumbs Down” to the playing track and skips to the next track. App OFF Starting procedure When connecting a MirrorLink device to this product, you must select the method for connecting your device.
Pandora® *1 *2 Selects a Pandora station from the list. Selecting a Pandora station from the list on page 31 Creates a new station Add station on page 31 p By pressing the button, you can skip songs forward. WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
iDatalink By connecting the optional iDatalink adapter, you can access the satellite radio source provided for the vehicle and the vehicle information can be displayed on this product. Important ● For information on installing the iDatalink adapter, refer to the operating manual of the iDatalink adapter. ● After installing the iDatalink adapter, be sure to check the operations. ● For details about vehicle models that are compatible with the iDatalink adapter, refer to the information on our website.
iDatalink 5 Ends a call. Rejects an incoming call. Cancels call waiting. Phone Book screen 6 3 Phone Book 1 2 3 4 5 Bluetooth audio player X5700BHS Dial confirmation screen ABC 1 B abcdefghi 2 C D abcdefghi Dial ABC Receiving 99999999999 E F abcdefghi X3700BHS X2700BS Playback screen 1 A abcdefghi X4700BS G abcdefghi 1 2 3 4 5 Switches to the voice recognition function. Switches to the phone book list. Switches to the missed, received and dialed call lists.
Bluetooth audio player Selects a file from the list. Selecting files from the file name list on page 34 p By pressing the or button, you can also skip files forward or backward. or button, you can also p By pressing and hold the perform fast reverse or fast forward. p Before using the Bluetooth audio player, register and connect the device to this product.
t SiriusXM® Satellite Radio Recalls the preset channel stored to a key from memory. Stores the current broadcast HOLD frequency to a key. Time bar display (Replay™ mode) 1 2 3 4 5 6 Selects a band. 6/10 21 48 Sirius XM SXM1 Abcdefghi Displays the preset channels. Select an item on the list ("1" to "6") to switch to the preset channel. Subscribing to the SiriusXM Satellite Radio service Abcdefghi Abcdefghi 9999’99” Pause -9999’99” *2 *3 *4 Selects a channel from the list.
SiriusXM® Satellite Radio Setting TuneStart™ Using category scan Automatically start songs from the beginning when you tune to one of your preset channels in the current preset band when Tune Start is turned on. You can scan each channel in the selected category. 1 Display the “System” setting screen. 1 Touch . Access the latest Traffic & Weather report for your favorite market, whenever you want to hear it. 2 Touch the desired category. 3 Touch 1 Touch .
SiriusXM® Satellite Radio When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels. The default passcode is “0000”. Listening to the channel 2 Touch [Featured Favorites] to switch “On” (default) or “Off”. Setting the passcode When a big play happens during a game with one of your favorite sports teams, SportsFlash detects it and displays the pop-up screen. If the Featured Favorite Band needs to update, the Featured Band Update message will appear.
AUX source 6/10 AUX 21 48 AV input Setting the video signal When you connect this product to an AUX equipment, select the suitable video signal setting. p You can operate this function only for the video signal input into the AUX input. 1 Display the “Video Setup” screen. is only available when there are both audio and video files on the auxiliary equipment. p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.
AV input MIXTRAX Starting procedure (for camera) X5700BHS X3700BHS You can display the image output by the camera connected to video input. 1 Display the “System” setting screen. 2 Touch [Video Signal Setting]. 3 Touch [AV]. 4 Touch the item you want to set. The following items are available: Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM. Deactivates the MIXTRAX mode. (Example: iPod) 6/10 iPod ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi ABC Pops 99999/99999 2 Touch [Input/Output Settings].
MIXTRAX Displaying the “MIXTRAX Settings” screen 1 Press 2 Touch . , and then [AV Source Settings]. 3 Touch [MIXTRAX Settings]. Setting the playback portion System settings 3 Touch the item you want to set. The following items are available: Standard (default), Simple, Custom When you select “Custom”, check the effect that you want. Setting the flash pattern The flashing color changes with the changes in the sound and bass levels. 1 Display the “MIXTRAX Settings” screen.
System settings Camera View can be displayed at all times. Please note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. p Immediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position.
System settings Setting the dimmer Setting the dimmer trigger p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the “System” setting screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the “System” setting screen. Displaying the “System” setting screen on page 40 2 Touch [Dimmer Settings]. 3 Touch [Dimmer Duration]. The “Duration Setting” screen appears.
System settings 2 Touch [System Information]. 3 Touch [Firmware Information]. The “Firmware Information” screen appears. Updating firmware Audio adjustments Displaying the “Audio” setting screen 1 Press 2 Touch 1 Download the firmware update files. 2 Connect a blank (formatted) USB storage device to your computer, and then locate the correct update file and copy it onto the USB storage device. 3 Connect the USB storage device to this product. 4 Turn the source off.
Audio adjustments Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal). ● Mode2: Corrects widely the audio level difference between the music files or the sources (for the wide dynamic range audio signal). Adjusting loudness This function compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. p This function is not available while you make or receive a call using the hands-free function.
Audio adjustments 4 Touch or if necessary. to select the listening position The following items are available: Off (default), Front, Front Left, Front Right, All. p “All” is not available when “Network Mode” is selected as the speaker mode. p If you change the listening position setting, the output levels of all the speakers will change in conjunction with the setting. 5 Touch or to input the distance between the selected speaker and the listening position.
Audio adjustments Before operating the Auto EQ function 1 Stop the vehicle in a quiet place, close all the doors, windows and sun roof, and then turn the engine off. ● Perform Auto EQ in as quiet a place as possible, with the vehicle engine and air conditioning switched off. Also, cut power to car phones or cellular phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.
Theme menu Selecting the background display The background display can be selected from 9 different preset displays for the AV operation screen and 6 different preset displays for the Top menu screen. Furthermore, you can change the background display to other images imported from an USB storage device. 1 Display the “Theme” screen. Adjusts the brightness and the level of red, green and blue to create a favorite color. 2 Touch [Illumination].
Theme menu You can also change the screen for settings by touching [Illumination], [Theme] or [Background] on this screen. 3 Touch the item you want to set. ● Preset images: Selects the desired preset clock image. ● (off): Hides the clock display. You can preview the Top menu screen or the AV operation screen by touching [Home] or [AV] respectively.
Setting up the video player Setting the angle icon display The angle icon can be set so it appears on scenes where the angle can be switched. p This setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”. 1 Display the “Video Setup” screen. ● Letter Box: Makes the image in the shape of a letterbox with black bands on the top and bottom of the screen. ● Pan Scan: Cuts the image short on the right and left sides of the screen.
Setting up the video player Favorite menu Displaying your DivX VOD deregistration code Setting the video signal for the rear view camera Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the “Favorites” screen. p Up to 12 menu items can be registered in the favorite menu. A registration code registered with a deregistration code can be deleted.
Common operations Changing the wide screen mode on page 51 1 1 2 3 4 5 6 Radio FM1 6/10 Setting the time and date 21 48 AM 1 Touch the current time on the screen. Abcdefghi Abcdefghi Abcdefghi 2 ᵦᵢ ᵢᵧᵥᵧᵲᵟᵪ 000.0 MHz ᵦᵢᵏ 6/10 CD 21 48 2 Touch date. or to set the correct time and You can operate the following items: Year, month, date, hour, minute. p You can change the time display format to “12hour” (default) or “24hour”.
Common operations p p p p An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. p This setting is for JPEG images only. You cannot operate this function while driving. Different settings can be stored for each video source. When a video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different.
Connection Other devices (Another electronic device in the car) Metal parts of car’s body F ACC O T ACC position OF OF ● When replacing the fuse, be sure to only use a fuse of the rating prescribed on this product. ● This product cannot be installed in a vehicle without ACC (accessory) position on the ignition switch. F O STAR 53 1 N WARNING ● Use speakers over 50 W (output value) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit.
Connection 9 Blue/white Connect to system control terminal of the power amp (max. 300 mA 12 V DC). a Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.
the Connection 3 1 2 5 1 9 5 3 2 1 7 4 6 7 3 2 8 9 iPhone with 30-pin connector iPhone and smartphone The USB interface cable for iPod / iPhone (CD-IU201V) (sold separately) is required for the connection. For details on how to connect an external device using a separately sold cable, refer to the manual for the cable. For details concerning the connection, operations and compatibility of iPhone, refer to Setup for iPod / iPhone or smartphone on page 16.
Connection 3 USB - micro USB cable (Type USB A - micro USB B) (supplied with CD-MU200) 4 Android or MirrorLink device Camera About rear view camera When you use the rear view camera, the rear view image is automatically switched from the video by moving the shift lever to REVERSE (R). Camera View mode also allows you to check what is behind you while driving. WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
Installation Precautions before installation CAUTION Never install this product in places where, or in a manner that: ● Could injure the driver or passengers if the vehicle stops suddenly. ● May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or shift lever. ● To ensure proper installation, be sure to use the supplied parts in the manner specified.
Installation Appendix 1 Troubleshooting 1 2 If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Problems with the AV screen 2 1 Microphone clip 2 Clamps Use separately sold clamps to secure the lead where necessary inside the vehicle.
Appendix The icon is displayed, and operation is impossible. The operation is not compatible with the video configuration. — This operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.) The picture stops (pauses) and this product cannot be operated. The reading of data is impossible during disc playback. — Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio.
Appendix Check Device Device error message displayed in Pandora application. — Please check your connected device. Incompatible USB The connected USB storage device is not supported by this product. — Disconnect your device and replace it with a compatible USB storage device. Check USB The USB connector or USB cable has short-circuited. — Check that the USB connector or USB cable is not caught in something or damaged. The connected USB storage device consumes more than maximum allowable current.
Appendix USB storage device Error-02-9X/-DX Communication failed. — Turn the ignition switch OFF and back ON. — Disconnect the USB storage device. — Change to a different source. Then, return to the USB storage device. Unplayable File This type of file cannot be played on this product. — Select a file that can be played. Security for the connected USB storage device is enabled. — Follow the USB storage device instructions to disable security.
Appendix for use or handling of the disc. This is not a sign of the malfunction of this product. Consider it to be normal wear and tear. Launching the application failed. Failed to launch the application. — Try again. Failed to display the screen of your device because of irregular resolution. The image size is too large. — The size of the images transferred from the device exceeds 800 × 480.
Appendix DVD-Video discs ● DVD-Video discs that have incompatible region numbers cannot be played on this DVD drive. The region number of the player can be found on this product’s chassis. DVD-R/DVD-RW/DVD-R SL (Single Layer)/DVD-R DL (Dual Layer) discs ● Unfinalized discs which have been recorded with the Video format (video mode) cannot be played back. ● Discs which have been recorded with the Video Recording format (VR mode) cannot be played back.
Appendix Maximum number of files: 15 000 Playable file types: MP3, WMA, AAC, WAVE, H.264, MPEG4, MKV, JPEG MP3 compatibility Ver. 2.x of ID3 tag is prioritized when both Ver. 1.x and Ver. 2.x exist. This product is not compatible with the following: MP3i (MP3 interactive), mp3 PRO, m3u playlist CD-R/-RW File extension: .mp3 Bit rate: 8 kbps to 320 kbps (CBR), VBR Sampling frequency: 16 kHz to 48 kHz (32 kHz, 44.1 kHz,48 kHz for emphasis) ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.
Appendix Compatible video codec: MPEG-4 (Simple Profile)/H.264 (Base Line Profile) Compatible audio codec: AAC/Linear PCM (LPCM) MP3 Maximum resolution: 640 pixels x 360 pixels Maximum Frame rate: 30 fps Maximum file size: 2 GB Maximum playback time: 150 minutes Files may not be able to be played back depending on the bit rate. .3gp Format: MPEG-4/H.264 Compatible video codec: MPEG-4 (Simple Profile)/H.
Appendix RW disc prior to burning, they will by played in written order by default. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
Appendix Notice regarding video viewing Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights as protected by the Copyright Law. Notice regarding DVD-Video viewing This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Appendix Slope .............–6 dB/oct, –12 dB/oct, –18 dB/oct, –24 dB/oct, OFF Subwoofer/LPF: Frequency .......... 50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz Slope .............–6 dB/oct, –12 dB/oct, –18 dB/oct, –24 dB/oct, OFF Gain ....................................................................... +10 dB to –24 dB Phase ...................................................................... Normal/Reverse Time alignment .....................................
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/ Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
Firmware Update (version 8.29) for Pioneer DVD Receivers December 22, 2014 Dear Valued Pioneer Customer: We would like to inform you of the availability of a firmware update (version 8.29) for the current lineup of Pioneer DVD receivers. This firmware update is only for the following Pioneer DVD receiver models, AVH-X1700S, AVH-X2700BS, AVH-X3700BHS, AVH-X4700BS and AVH-X5700BHS, sold in the United States and Canada. Installation on any other product could cause irreversible damage.
System Firmware Update Instructions for Pioneer DVD Receivers (AVH-X1700S, AVH-X2700BS, AVH-X3700BHS, AVH-X4700BS and AVH-X5700BHS) This firmware update (version 8.29) applies only to the following models of Pioneer DVD Receivers sold in the United States and Canada. AVH-X5700BHS AVH-X4700BS AVH-X3700BHS AVH-X2700BS AVH-X1700S IMPORTANT Please download and print these Firmware Update instructions before downloading and installing the firmware update.
4. Touch the [Setting] icon. 5. Select [System information] for select menu of system setting. 6. Select [Firmware information]. 7. Confirm current version of the product. (If the firmware version shows “8.29” or higher, no further action is necessary.
A. Downloading the Firmware Update Files 1. Download the firmware update files by clicking on the following link and finding your product: pioneerelectronics.com/firmware 2. Extract the download file. The Downloaded zip file will produce the following file when decompressed: (See the table below) AVH-X5700BHS AVH-X4700BS PEH443C.AVH AVH-X3700BHS AVH-X2700BS AVH-X1700S B.
5. Touch the [AV source] & touch [Off] to source Off. 6. Touch [Setting] icon. 7. Select [System information] to select the system setting menu.
8. Select [Firmware Update]. 9. Touch [Continue]. 10. Read the “WARNING,” then touch the [Start] button to start the update process. If it shows “ERROR” on the display, try another USB device.
11. After starting, there will be a progress bar while updating. 12. Display will show “It succeeded…” when the update is complete. 13. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen. 14. The firmware update is now complete. Your Pioneer DVD Receiver is now ready for use.
(English) Applying excessive force or impact to the shaded area may damage the liquid crystal display (LCD) screen or touch panel. Be careful when installing the product to your vehicle. (Fran~is) Appliquer une force excessive ou un impact sur Ia zone grlsee peut endommager l'ecran a cristaux llquides (LCD) ou l'ecran tactile. Faites attention lors de I' installation du produit sur votre vehicule.
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUE DU CANADA, INC. GARANTIE LIMITEE GARANTIE VALl DE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc.
PIONEER ELECTRONICS OF CANADA, INC. PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA in the U.S.A.