VSX_516.fm 1 ページ 2005年12月22日 木曜日 VSX-416-S/-K VSX-516-S/-K 午後3時50分 AUDIO/VIDEO MULTI-CHANNEL RECEIVER SINTOAMPLIFICATORE AUDIO/VIDEO MULTICANALE Discover the benefits of registering your product online at www.pioneer.co.uk (www.pioneer-eur.com). Registra il tuo prodotto su www.pioneer.it (o www.pioneer-eur.
VSX_516.fm 2 ページ 2005年12月22日 木曜日 午後3時50分 IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
VSX_516.fm 3 ページ 2005年12月22日 木曜日 午後3時50分 If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
VSX_516.fm 4 ページ 2005年12月22日 木曜日 Contents 01 Before you start Checking what’s in the box . . . . . . . . . . . . . . . Loading the batteries . . . . . . . . . . . . . . . . . . . Operating range of remote control unit . . . . . . Installing the receiver . . . . . . . . . . . . . . . . . . . 5 5 5 5 02 5 minute guide Introduction to home theater . . . . . . . . . . . . . 6 Listening to Surround Sound . . . . . . . . . . . . . 6 Using the Quick Setup . . . . . . . . . . . . . . . . . .
01_before_you_start.fm 5 ページ 2005年12月26日 月曜日 午前10時57分 Before you start 01 English Chapter 1: Before you start Please check that you've received the following supplied accessories: • Never use new and old batteries together. • Insert the plus and minus sides of the batteries properly according to the marks in the battery case. • Batteries with the same shape may have different voltages. Do not use different batteries together.
VSX_516.fm 6 ページ 2005年12月22日 02 木曜日 午後3時50分 5 minute guide Chapter 2: 5 minute guide Introduction to home theater Home theater refers to the use of multiple audio tracks to create a surround sound effect, making you feel like you're in the middle of the action or concert. The surround sound you get from a home theater system depends not only on your speaker setup, but also on the source and the sound settings of the receiver.
VSX_516.fm 7 ページ 2005年12月22日 木曜日 午後3時50分 5 minute guide 02 2.0ch – 3.0ch – 4.0ch – 5.0ch – 6.0ch* • Check the table below to find the speaker setup that corresponds with your system. Deutsch You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup, room size and listening position.
VSX_516.fm 8 ページ 2005年12月22日 03 木曜日 午後3時50分 Quick surround sound setup Chapter 3: Quick surround sound setup VSX-516 model only MASTER VOLUME Automatically setting up for surround sound (MCACC) The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level.
VSX_516.fm 9 ページ 2005年12月22日 木曜日 午後3時50分 Quick surround sound setup 03 • ERR MIC – Check microphone connection. Optionally, when you see SKIP? you can press / (cursor up/down) to select one of the following options then press ENTER, and use / (cursor up/down) to check the settings: • ERR Fch – Check front speaker connections. • ERR Sch – Check surround speaker connections. • ERR SBch – Check surround back speaker connection.
VSX_516.fm 10 ページ 2005年12月22日 04 木曜日 午後3時50分 Connecting up Chapter 4: Connecting up Analog audio cables Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Use stereo RCA phono cables to connect analog audio components.
VSX_516.fm 11 ページ 2005年12月22日 木曜日 午後3時50分 Connecting up 04 English Connecting a TV and DVD player This page shows you how to connect your DVD player and TV to the receiver. 2 Connect the composite video output and the stereo analog audio outputs2 on your DVD player to the DVD/LD inputs on this receiver. Use a standard RCA video cable and a stereo RCA phono cable for the connection.
VSX_516.fm 12 ページ 2005年12月22日 04 木曜日 午後3時50分 Connecting up Connecting the multichannel analog outputs For DVD Audio and SACD playback, your DVD player may have 5.1 channel analog outputs.In this case, you can connect them to the multichannel inputs of the receiver as shown below.1 2 If your set-top box has a digital output, connect it to a digital input on this receiver. The example shows an optical connection to the DIGITAL OPT 1 (CD) input.
VSX_516.fm 13 ページ 2005年12月22日 木曜日 午後3時50分 Connecting up This receiver FM UNBAL 75 Ω The number and kind of connections depends on the kind of component you’re connecting.1 Follow the steps below to connect a CD-R, MD, DAT, tape recorder or other audio component.
VSX_516.fm 14 ページ 2005年12月22日 04 木曜日 午後3時50分 Connecting up Microsoft, Windows Media®, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. This receiver FM UNBAL 75 Ω Connecting other video components OPT IN DVR / VCR AM LOOP ANTENNA OUT VIDEO TV / SAT IN OUT IN IN ASSIGNABLE DIGITAL IN DVD /LD FRONT IN COAX 2 (DVR/VCR) PLAY CD-R / TAPE / MD IN COAX 1 (DVD/LD) 3 MONITOR OUT DVD 5.
VSX_516.fm 15 ページ 2005年12月22日 木曜日 午後3時50分 Connecting up 04 To improve FM reception Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). fig. b Use a PAL connector to connect an external FM antenna. Deutsch fig. a English Using external antennas Connecting antennas fig.
VSX_516.fm 16 ページ 2005年12月22日 04 木曜日 午後3時50分 Connecting up Connecting the speakers A complete speaker setup is shown below, but everyone’s home setup will vary. Simply connect the speakers you have in the manner illustrated. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers ( VSX-416 model) / four speakers (VSX-516 model) is recommended, and a complete setup is best for surround sound.
VSX_516.fm 17 ページ 2005年12月22日 木曜日 午後3時50分 Connecting up VSX-416 model Twist exposed wire strands together. 2 Push open the tabs and insert exposed wire. Release the tabs. VSX-516 model Twist exposed wire strands together. 2 Loosen terminal and insert exposed wire. 3 Tighten terminal. Speaker terminals Hints on speaker placement Speakers are usually designed with a particular placement in mind. Some are designed to be floorstanding, while others should be placed on stands to sound their best.
VSX_516.fm 18 ページ 2005年12月22日 04 木曜日 午後3時50分 Connecting up Speaker placement diagrams Extra Power mode speaker setup The following illustrations show a 6.1 channel speaker setup.1 VSX-416 model only – See Using the Advanced surround effects on page 26 to switch on the Extra Power mode (EX POWER). 3-D view of 6.
VSX_516.fm 19 ページ 2005年12月22日 木曜日 午後3時50分 Controls and displays 05 English Chapter 5: Controls and displays Deutsch Front panel Illustration shows the VSX-516 model 2 1 3 4 5 AUDIO/VIDEO MULTI-CHANNEL RECEIVER 6 ADVANCED ST/DIRECT/ SURR AUTO SURR DVD/LD TV/SAT DVD 5.
VSX_516.fm 20 ページ 2005年12月22日 05 木曜日 Controls and displays 8 ACOUSTIC EQ (VSX-516 model only) Press to select an Acoustic Calibration EQ setting (page 27). 18 PTY SEARCH Use this button to search for RDS program types (page 39). 9 VSB MODE (VSX-416 model only) Switches on Virtual surround back processing (page 28). 19 MIDNIGHT/LOUDNESS Switches to Midnight/Loudness listening (page 29). 10 DIALOGUE ENHANCEMENT (VSX-416 model only) 20 SPEAKER IMPEDANCE Use to change the impedance setting (page 46).
VSX_516.fm 21 ページ 2005年12月22日 木曜日 午後3時50分 Controls and displays 05 English Display Illustration shows the VSX-516 model 1 2 3 4 5 6 7 8 9 10 11 12 [L] 6 [C] [R] [Rs ] 0 [SBR] [SB L ] [Ls ] 6 Deutsch EON RDS SP A 13 40 125 250 4K13K 16 17 18 19 AUTO Lights when AUTO signal select is on. DIGITAL Lights when a digital audio signal is detected. 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected.
05_controls_displays.fm 22 ページ 2006年1月6日 05 金曜日 午前8時58分 Controls and displays 10 Tuner indicators / MONO Lights when the mono mode is set using the MPX button. / STEREO Lights when a stereo FM broadcast is being received in auto stereo mode. / TUNED Lights when a broadcast is being received. 11 EON/RDS indicators EON – Lights when the EON mode is set, and flashes during an EON broadcast. The indicator lights when the current station carries the EON service (page 40).
VSX_516.fm 23 ページ 2005年12月22日 木曜日 午後3時50分 Controls and displays 05 2 ACOUSTIC EQ* (SHIFT +) (VSX-516 model only) Press to select an Acoustic Calibration EQ setting (page 27). Listening mode buttons STANDARD Press for Standard decoding and to switch between 2Pro Logic II and (VSX-516 model only) Neo:6 options (page 25). ADV.SURR Switches between the various surround modes (page 26). MUTE Mutes/unmutes the sound. 6 SHIFT Press to access the ‘boxed’ commands (above the buttons) on the remote.
05_controls_displays.fm 24 ページ 2006年1月6日 05 11 RETURN Confirm and exit the current menu screen. ONE TOUCH COPY* Copies the currently playing title from DVD to HDD or vice-versa. 12 DVD/DVR control buttons Use these buttons to control a Pioneer DVD player or recorder connected to your system (press DVD or DVR to access the below controls). Button What it does DVD/ DVR Turns DVD power on/off. CH +/– Switches channels. SUBTITLE Displays/changes the subtitles on multilingual DVD-Video discs.
06_playing_sources.fm 25 ページ 2006年1月6日 金曜日 午前9時1分 Listening to your system 06 English Chapter 6: Listening to your system Auto playback CD CD-R FM AM TOP MENU MENU Listening in surround sound Using this receiver, you can listen to any source in surround sound. However, the options available will depend on your speaker setup and the type of source you’re listening to. AM TOP MENU MENU • While listening to a source, press STANDARD.
VSX_516.fm 26 ページ 2005年12月22日 06 木曜日 午後3時50分 Listening to your system • 2 PRO LOGIC – 4.1 channel surround sound • Neo:6 CINEMA – 6.1 channel sound, especially suited to movie sources • Neo:6 MUSIC1 – 6.
06_playing_sources.fm 27 ページ 2005年12月26日 月曜日 午前11時2分 Listening to your system 06 Options What it does Center Widtha (Applicable only when using a center speaker) Spreads the center channel 0 to 7 between the front right and left Default: 3 speakers, making it sound wider (higher settings) or narrower (lower settings). Panoramaa Extends the front stereo image to include surround speakers for a ‘wraparound’ effect.
VSX_516.fm 28 ページ 2005年12月22日 06 木曜日 午後3時50分 Listening to your system • F. ALIGN – All speakers are heard in accordance with the front speaker settings. • CUSTOM 1/2 – Custom settings • EQ OFF – Switches Acoustic Calibration EQ off. The MCACC indicator on the front panel lights when Acoustic Calibration EQ is active.1 Choosing the input signal • Default setting: AUTO You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.
VSX_516.fm 29 ページ 2005年12月22日 木曜日 午後3時50分 Listening to your system • VSB ON – Virtual Surround Back is always used (for example, on 5.1 encoded material) English • VSB AUTO (VSX-516 model only) – Virtual Surround Back is automatically applied to 6.1 encoded sources (for example, Dolby Digital EX or DTS-ES) Deutsch with no surround back channel information, or if the material sounds better in the format (for example, 5.
VSX_516.fm 30 ページ 2005年12月22日 06 木曜日 午後3時50分 Listening to your system Using the tone controls Depending on what you are listening to, you may want to adjust the bass or treble using the front panel tone control. 1 Press TONE to select the frequency you want to adjust. Press to switch between BASS and TREBLE. 2 Use the MULTI JOG dial to change the amount of bass or treble as necessary. Wait about five seconds for your changes to be input automatically.
VSX_516.fm 31 ページ 2005年12月22日 木曜日 午後3時50分 The System Setup menu 07 English Chapter 7: The System Setup menu Manual MCACC speaker setup The following section shows you how to make detailed settings to specify how you’re using the receiver. It also explains how to fine-tune individual speaker system settings. VSX-516 model only MENU SETUP DVD 5.1 INPUT SELECTOR DIALOG E ENTER DVD TV DVR RECEIVER CD CD-R FM AM TUNER EDIT S.
VSX_516.fm 32 ページ 2005年12月22日 07 木曜日 The System Setup menu • SP DISTN. – Make precise delay settings for your speaker system (see Fine Channel Distance below). The last five settings are specifically for customizing the parameters explained in Acoustic Calibration EQ on page 33: • EQ A. SET – Measure the acoustic characteristics of your room and automatically adjust the frequency balance of your speaker system (see Setting the Acoustic Calibration EQ automatically on page 33).
VSX_516.fm 33 ページ 2005年12月22日 木曜日 午後3時50分 The System Setup menu 1 Select ‘EQ A. SET’ from the Manual MCACC setup menu. • Make sure the microphone is connected. English Try to make the two tones sound as if they are arriving simultaneously at a position slightly in front of you and between your arm span. 07 When it sounds like the delay settings are matched up, press (cursor down) to confirm and continue to the next channel.
VSX_516.fm 34 ページ 2005年12月22日 07 木曜日 The System Setup menu 2 Use / to select C1 or C2 then use the / buttons to select the setting you want to copy. • You can also copy from one custom setting to another. For more on the A. CH and F.ALG settings, see Setting the Acoustic Calibration EQ automatically above. 3 Use / to select ‘COPY? YES’ to copy and confirm. You can also use / to select COPY? NO to cancel.
VSX_516.fm 35 ページ 2005年12月22日 木曜日 午後3時50分 The System Setup menu 4 When you're finished, press RETURN. You will return to the Manual MCACC setup menu. Speaker setting Use this setting to specify your speaker configuration (size, number of speakers). • Surround (S) – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer.
VSX_516.fm 36 ページ 2005年12月22日 07 木曜日 午後3時50分 The System Setup menu come out the front and center speakers are also routed to the subwoofer).1 If you did not connect a subwoofer choose NO (the bass is output from other speakers). 4 Adjust the level of each channel using / . If you selected T. TONE M., use / to switch speakers. The T. TONE A.
VSX_516.fm 37 ページ 2005年12月22日 木曜日 午後3時50分 The System Setup menu Dynamic Range Control Setup • Default setting: OFF Specifies the amount of dynamic range adjustment to Dolby Digital or DTS soundtracks: • MAX – Dynamic range is reduced (loud sounds are reduced in volume while quieter sounds are increased). 3 Select the component that corresponds with the one you connected to that input. • Use the / buttons and ENTER to select DVD, TV, CD, CDR, DVR or OFF. Press RETURN when you’re finished.
VSX_516.fm 38 ページ 2005年12月22日 08 木曜日 午後3時50分 Using the tuner Chapter 8: Using the tuner Naming station presets Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts and memorize the frequency for recall later. 1 Press AM or FM to select the tuner band. 2 Tune to a station. There are three ways to do this: Automatic tuning – Press and hold TUNING +/– for about a second. Searching automatically stops at the next station.
VSX_516.fm 39 ページ 2005年12月22日 木曜日 午後3時50分 Using the tuner 08 • Program Service Name (PS) – The name of the radio station. • Program Type (PTY) – This indicates the kind of program currently being broadcast. • Current tuner frequency (FREQ) Searching for RDS programs You can search for a program type listed above. 1 Press the FM button to select the FM band.3 2 Press PTY SEARCH (front panel). SEARCH shows in the display. Nederlands 3 Use the MULTI JOG dial to select the program type you want to hear.
VSX_516.fm 40 ページ 2005年12月22日 08 木曜日 午後3時50分 Using the tuner 5 If you want to keep listening to the station, press ENTER within the 5 seconds. If you don’t press ENTER, searching resumes. If NO PTY is displayed it means the tuner couldn’t find that program type at the time of the search.1 Using EON When EON (Enhanced Other Network information) is turned on, the receiver jumps to an EON-linked broadcast when it begins, even if a receiver function other than the tuner is being used.
VSX_516.fm 41 ページ 2005年12月22日 木曜日 午後3時50分 Making recordings 09 English Chapter 9: Making recordings 5 Start recording, then start playback of the source component. Français You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV). Deutsch Making an audio or a video recording Refer to the instructions that came with the recorder if you are unsure how to do this.
VSX_516.fm 42 ページ 2005年12月22日 10 木曜日 午後3時50分 USB playback Chapter 10: USB playback Using the USB interface Basic playback controls VSX-516 model only The following table shows the basic controls on the remote for USB playback. It is possible to listen to two-channel audio1 using the USB interface on the front of this receiver. Connect a USB mass storage device2 as shown below. 1 Press USB (SHIFT+CD). 2 Connect your USB device. The USB terminal is located on the front panel.
VSX_516.fm 43 ページ 2005年12月22日 木曜日 午後3時50分 USB playback • Use a dedicated AC adapter (supplied with the device) for USB power. If this doesn’t remedy the problem, it is likely your USB device is incompatible. Apple and iTunes are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Français Note that although most standard bit/ sampling rate combinations for compressed audio are compatible, some irregularly encoded files may not play back.
VSX_516.fm 44 ページ 2005年12月22日 11 木曜日 午後3時50分 Additional information Chapter 11: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
VSX_516.fm 45 ページ 2005年12月22日 木曜日 午後3時50分 Additional information Remedy English Problem 11 Noise during playback of a cassette deck. • Move the cassette deck further from your receiver, until the noise disappears. Italiano • Make sure the subwoofer is switched on. • If the subwoofer has a volume knob, make sure it’s turned up. • The Dolby Digital or DTS source you are listening to may not have an LFE channel. • Switch the subwoofer setting in Speaker setting on page 35 to YES or PLUS.
11_additional_info.fm 46 ページ 2006年1月6日 11 金曜日 Additional information Resetting the main unit Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. 1 Switch the receiver into standby. 2 While holding down the TONE button, press and hold the STANDBY/ON button for about three seconds. 3 When you see RESET? appear in the display, press the ENTER button. OK? shows in the display. 4 Press SETUP to confirm.
11_additional_info.fm 47 ページ 2005年12月26日 月曜日 午前11時4分 Additional information • Input (Sensitivity/Impedance) DVR/VCR, DVD/LD, TV/SAT . . . . . . . .1 Vp-p/75 Ω • Output (Level/Impedance) DVR/VCR, MONITOR OUT . . . . . . . . .1 Vp-p/75 Ω Frequency response DVR/VCR, DVD/LD, TV/SAT MONITOR . . . . . .5 Hz to 7 MHz dB Signal-to-Noise Ratio. . . . . . . . . . . . . . . . . . . 55 dB Crosstalk. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSX_516_Italian.fm Page 2 Friday, January 6, 2006 2:46 PM IMPORTANTE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Il simbolo del lampo con terminale a forma di freccia situato all’interno di un triangolo equilatero serve ad avvisare l’utilizzatore della presenza di una “tensione pericolosa” non isolata nella struttura del prodotto che potrebbe essere di un’intensità tale da provocare scosse elettriche all’utilizzatore.
VSX_516_Italian.fm Page 3 Friday, January 6, 2006 2:46 PM Se si vuole eliminare questo prodotto, non gettarlo insieme ai rifiuti domestici. Esiste un sistema di raccolta differenziata in conformità alle leggi che richiedono appositi trattamenti, recupero e riciclo. I privati cittadini dei venticinque paesi membri dell’UE, di Svizzera e Norvegia, possono restituire senza alcun costo i loro prodotti elettronici usati ad appositi servizi di raccolta o a un rivenditore (se si desidera acquistarne uno simile).
VSX_516_Italian.fm Page 4 Friday, January 6, 2006 2:46 PM Indice 01 Prima di cominciare Controllo dei contenuti della scatola . . . . . . . . 5 Installazione delle batterie . . . . . . . . . . . . . . . . 5 Gamma operativa del telecomando . . . . . . . . . 5 Installazione del ricevitore . . . . . . . . . . . . . . . . 5 02 Guida di 5 minuti Presentazione del sistema home theater. . . . . 6 Ascolto del suono surround . . . . . . . . . . . . . . 6 Uso della Configurazione rapida . . . . . . . . . . .
VSX_516_Italian.fm Page 5 Friday, January 6, 2006 2:46 PM Capitolo 1: Prima di cominciare Controllare che siano stati inclusi i seguenti accessori in dotazione: • Antenna FM a filo • Non usare né conservare le batterie alla luce diretta del sole o in luoghi eccessivamente caldi, come all’interno di un’automobile o in prossimità di un calorifero. Le batterie potrebbero perdere liquido, surriscaldarsi, esplodere o prendere fuoco.
VSX_516_Italian.fm Page 6 Friday, January 6, 2006 2:46 PM Capitolo 2: Guida di 5 minuti Presentazione del sistema home theater Home theater riguarda l’uso di piste audio multiple per creare un effetto sonoro surround, per farvi sentire al centro dell’azione o di un concerto. Il suono surround che si ottiene da un sistema home theater non dipende solo dalla configurazione degli altoparlanti in uso, ma anche dalla sorgente utilizzata e dalle impostazioni del ricevitore.
VSX_516_Italian.fm Page 7 Friday, January 6, 2006 2:46 PM • Se si è selezionato NO (modello VSX-416) o se è stato rilevato un subwoofer (modello VSX-516) per l’impostazione del subwoofer al punto 3, sono disponibili le seguenti opzioni: Uso della Configurazione rapida È possibile usare la Configurazione rapida per fare funzionare rapidamente il sistema solo premendo qualche pulsante.
VSX_516_Italian.fm Page 8 Friday, January 6, 2006 2:46 PM Capitolo 3: Impostazione rapida suono surround Solo per il modello VSX-516 Impostazione automatica del suono surround (MCACC) L’impostazione del sistema automatico di calibratura acustica multicanale (MCACC) misura le caratteristiche acustiche dell’area di ascolto, prendendo in considerazione il rumore ambientale, la dimensione e la distanza degli altoparlanti e i test per il ritardo e il livello dei canali.
VSX_516_Italian.fm Page 9 Friday, January 6, 2006 2:46 PM Italiano 9 Alla fine, selezionare ‘SKIP?’ per tornare al menu System Setup. • Ricordarsi di scollegare il microfono dopo aver completato la funzione Auto MCACC Setup.
VSX_516_Italian.fm Page 10 Friday, January 6, 2006 2:46 PM Capitolo 4: Collegamento Cavi audio analogici Come collegare i cavi Assicurarsi di non piegare i cavi sulla parte superiore di questa unità (come mostrato nell’illustrazione). Se ciò accade, il campo magnetico prodotto dai trasformatori in questa unità può provocare un ronzio dagli altoparlanti. Usare dei cavi fono RCA stereo per effettuare il collegamento dei componenti audio analogici.
VSX_516_Italian.fm Page 11 Friday, January 6, 2006 2:46 PM Collegamento di un lettore DVD e di un televisore Questa pagina mostra come collegare il lettore DVD e il televisore al ricevitore. English 1 Collegare un’uscita audio digitale coassiale sul lettore DVD all’ingresso DIGITAL COAX 1 (DVD/LD) sul ricevitore. Usare un cavo audio digitale coassiale per il collegamento.
VSX_516_Italian.fm Page 12 Friday, January 6, 2006 2:46 PM Collegamento delle uscite analogiche multicanale Per la riproduzione DVD Audio e SACD, il lettore DVD potrebbe avere uscite analogiche a 5.1 canali. In questo caso, è possibile collegarle agli ingressi multicanale del ricevitore, come sotto mostrato.1 1 Collegare una serie di uscite audio/video sul componente set-top agli ingressi TV/SAT AUDIO e VIDEO sul ricevitore.
VSX_516_Italian.fm Page 13 Friday, January 6, 2006 2:46 PM Collegamento di altri componenti audio English Il numero e il tipo di collegamenti dipende dal tipo di componente che si sta collegando.1 Seguire le fasi successive per collegare un CDR, un MD, un DAT, una piastra a cassette o altri componenti audio. Deutsch 1 Se il componente dispone di un’uscita digitale, collegarlo a un ingresso digitale del ricevitore. L’esempio illustra un collegamento ottico all’ingresso DIGITAL OPT 1 (CD).
VSX_516_Italian.fm Page 14 Friday, January 6, 2006 2:46 PM Microsoft, Windows Media® e il logo Windows sono marchi commerciali o marchi commerciali registrati di Microsoft Corporation negli Stati Uniti e/o altri Paesi. Collegamento di altri componenti video Questo ricevitore ha ingressi e uscite audio/ video adatti alla connessione di apparecchi di registrazione video analogici o digitali, inclusi videoregistratori, registratori DVD e registratori HDD.
VSX_516_Italian.fm Page 15 Friday, January 6, 2006 2:46 PM Uso delle antenne esterne Collegamento delle antenne Collegare l’antenna AM a telaio e l’antenna FM a filo come segue. Per migliorare la ricezione e la qualità sonora, collegare le antenne esterne (vedi Uso delle antenne esterne qui sotto). fig. b Usare un connettore PAL per collegare un’antenna esterna FM. English fig. a Per migliorare la ricezione FM fig.
VSX_516_Italian.fm Page 16 Friday, January 6, 2006 2:46 PM Collegamento degli altoparlanti Di seguito è visualizzata una configurazione di altoparlanti completa, tuttavia si possono avere impostazioni differenti. Collegare semplicemente gli altoparlanti nel modo illustrato.
VSX_516_Italian.fm Page 17 Friday, January 6, 2006 2:46 PM Modello VSX-416 1 Attorcigliare la parte scoperta dei cavi. 2 Premere le linguette per aprirle e inserire la parte scoperta del cavo. Rilasciare le linguette. Modello VSX-516 1 Attorcigliare i trefoli esposti. 3 Serrare il terminale.
VSX_516_Italian.fm Page 18 Friday, January 6, 2006 2:46 PM Diagrammi di posizionamento degli altoparlanti Configurazione altoparlanti in modalità Extra Power Le illustrazioni che seguono mostrano una configurazione altoparlanti a 6.1 canali.1 Solo per il modello VSX-416 – Vedere Uso degli effetti surround Advanced a pagina 26 per attivare la modalità Extra Power (EX POWER).
VSX_516_Italian.fm Page 19 Friday, January 6, 2006 2:46 PM Capitolo 5: Controlli e display English Pannello anteriore L’illustrazione mostra il modello VSX-516 Deutsch Français Italiano 3 Indicatore MCACC (Solo per il modello VSX516) Si illumina quando è attiva la funzione Acoustic Calibration EQ (pagina 27) (la funzione Acoustic Calibration EQ è impostata automaticamente su ALL CH ADJUST dopo aver eseguito la funzione Auto MCACC Setup (pagina 8) o EQ Auto Setup (pagina 33)).
VSX_516_Italian.fm Page 20 Friday, January 6, 2006 2:46 PM 8 ACOUSTIC EQ (Solo per il modello VSX-516) Premere questo per selezionare un’impostazione EQ della calibratura acustica (pagina 27). 9 VSB MODE (Solo per il modello VSX-416) Consente di passare alla modalità di elaborazione posteriore Virtual surround (pagina 28). 10 DIALOGUE ENHANCEMENT (Solo per il modello VSX-416) Usato per dar rilievo al dialogo mentre guardate la TV o un film (pagina 29).
VSX_516_Italian.fm Page 21 Friday, January 6, 2006 2:46 PM Display L’illustrazione mostra il modello VSX-516 1 2 3 4 5 6 7 8 9 10 11 12 [L] 6 [C] [R] [Rs ] 0 [SBR] [SB L ] [Ls ] 6 English EON RDS SP A 13 40 125 250 4K13K 16 17 18 19 AUTO S’illumina quando è attiva la selezione di segnale AUTO. DTS S’illum quando viene rilevata una fonte con segnali audio con codifica DTS. ANALOG S’illumina quando viene rivelato un segnale analogico.
VSX_516_Italian.fm Page 22 Friday, January 6, 2006 2:46 PM 10 Spie del Sintonizzatore / MONO S’illumina quando si imposta modalità mono usando il tasto MPX. / STEREO S’illumina quando la trasmissione FM stereo è in fase di ricezione nella modalità stereo automatica. / TUNED S’illumina alla ricezione di una trasmissione. 11 Spia del dell’altoparlante EON – Si illumina quando è impostata la modalità EON e lampeggia durante la ricezione di una trasmissione EON.
VSX_516_Italian.fm Page 23 Friday, January 6, 2006 2:46 PM LEVEL +/– Consente di regolare i livelli di effetti e canali. 1 RECEIVER Commuta il ricevitore tra standby e on. 2 Tasti Listening mode ACOUSTIC EQ* (SHIFT +) (Solo per il modello VSX-516) Premere questo per selezionare un’impostazione EQ della calibratura acustica (pagina 27). ADV.SURR Consente di alternare le varie modalità surround (pagina 26). MUTE Silenzia/ripristina l’audio.
VSX_516_Italian.fm Page 24 Friday, January 6, 2006 2:46 PM 10 /ENTER Usare i tasti freccia quando per la configurazione del sistema di suono surround (pagina 31). Si utilizza anche per i menu DVD. 11 RETURN Confermare e uscire dallo schermo di menu attuale. ONE TOUCH COPY* Consente di copiare il titolo in riproduzione da DVD ad HDD o viceversa.
VSX_516_Italian.fm Page 25 Friday, January 6, 2006 2:46 PM Capitolo 6: Ascolto del sistema • Alcune funzioni spiegate in questa sezione non saranno possibili a seconda della fonte (ad esempio, PCM 88,2 kHz / 96 kHz, DTS 96 kHz (24 bit) o fonti WMA 9 Pro). • Premere STANDARD durante l’ascolto della fonte. Se la fonte è codificata Dolby Digital, DTS o Dolby Surround, il formato di decodificazione corretto verrà selezionato automaticamente e visualizzato sul display.
VSX_516_Italian.fm Page 26 Friday, January 6, 2006 2:46 PM • 2 PRO LOGIC – Suono surround a 4.1 canali • Neo:6 CINEMA – Suono a 6.1 canali, particolarmente adatto per i film • Neo:6 MUSIC1 – Suono a 6.
VSX_516_Italian.fm Page 27 Friday, January 6, 2006 2:46 PM 3 Premere EFFECT/CH SEL nuovamente per regolare le altre impostazioni. ImpostaFunzione zione Opzioni Dimensiona Regola il bilanciamento del suono surround dalla parte anteriore a quella posteriore, rendendo il suono più distante (impostazione negativa) o più vicino (impostazione positiva).
VSX_516_Italian.fm Page 28 Friday, January 6, 2006 2:46 PM • F. ALIGN – Tutti gli altoparlanti sono allineati in conformità con le impostazioni degli altoparlanti anteriori. • CUSTOM 1/2 – Impostazioni personalizzate • EQ OFF – Spegne la calibratura acustica EQ. L’indicatore MCACC s’illumina sul pannello anteriore quando è attivata la funzione Acoustic Calibration EQ.
VSX_516_Italian.fm Page 29 Friday, January 6, 2006 2:46 PM Tipo di fonte • VSB AUTO (Solo per il modello VSX-516) – La funzione Virtual Surround Back viene applicata automaticamente alle sorgenti con codifica 6.
VSX_516_Italian.fm Page 30 Friday, January 6, 2006 2:46 PM Uso dei controlli del tono Secondo l’ascolto, può essere utile regolare i bassi o gli acuti usando il controllo del tono del pannello anteriore. 1 Premere TONE per selezionare la frequenza da regolare. Premere per commutare tra BASS e TREBLE. 2 Usare il controllo MULTI JOG per cambiare la quantità dei bassi o degli acuti se necessario. Attendere cinque secondi circa per l’inserimento automatico delle modifiche.
VSX_516_Italian.fm Page 31 Friday, January 6, 2006 2:46 PM Capitolo 7: Menù System Setup • IN ASSIG. – Specificare cosa si è collegato agli ingressi digitale e dei componenti video (vedere Menù Input Assign a pagina 36). • OTHER – Effettuare impostazioni personalizzate a seconda di come si sta usando il ricevitore (vedere il Menu di impostazione Other a pagina 37).
VSX_516_Italian.fm Page 32 Friday, January 6, 2006 2:46 PM • SP DISTN. – Effettuare impostazioni di ritardo precise per il sistema dei diffusori (vedere Distanza ottimale dei diffusori sotto). Le ultime cinque impostazioni sono in modo specifico per personalizzare i parametri spiegati in Calibratura acustica EQ a pagina 33: • EQ A.
VSX_516_Italian.fm Page 33 Friday, January 6, 2006 2:46 PM Cercare di far suonare i due toni come se arrivassero contemporaneamente ad una posizione leggermente davanti a voi tra le braccia. Calibratura acustica EQ Se si è già completata Impostazione automatica del suono surround (MCACC) a pagina 8, A. CH ADJ e F.ALG ADJ (sotto) dovrebbero già essere impostati. Perciò, se si desidera regolare le impostazioni manualmente, saltare a Impostazione manuale della funzione Acoustic Calibration EQ sotto.
VSX_516_Italian.fm Page 34 Friday, January 6, 2006 2:46 PM 2 Usare / per selezionare C1 o C2, quindi usare i tasti / per selezionare le impostazioni che si intendono copiare. • Si può anche copiare da un’impostazione personalizzata ad un’altra. Per ulteriori informazioni sulle impostazioni A. CH e F.ALG, vedere Impostazione automatica della funzione Acoustic Calibration EQ. 3 Usare / per selezionare ‘COPY? YES’ per copiare e confermare.
VSX_516_Italian.fm Page 35 Friday, January 6, 2006 2:46 PM 3 Usare / per selezionare il canale desiderato, usando / per controllare le impostazioni. Le spie MCACC canale EQ sul display del pannello anteriore s’illuminano di conseguenza. Configurazione manuale degli altoparlanti Selezionare SP SETUP dal menù System Setup. Usare quest’impostazione per specificare la configurazione degli altoparlanti (formato, numero di altoparlanti).
VSX_516_Italian.fm Page 36 Friday, January 6, 2006 2:46 PM dagli altoparlanti anteriori e centrale sono inviate al subwoofer)1. Se non si è collegato un subwoofer, selezionare NO (i bassi vengono emessi dagli altri altoparlanti). Rete Crossover • Impostazione standard: 100Hz Quest’impostazione decide il taglio tra i suoni dei bassi riproducendo i toni da tutti gli altoparlanti selezionati come LARGE, o il subwoofer e riproduce i suoni bassi da quelli selezionati come SMALL.
VSX_516_Italian.fm Page 37 Friday, January 6, 2006 2:46 PM Queste operazioni devono essere eseguite solo nel caso in cui i componenti digitali non siano stati collegati secondo le impostazioni predefinite sopraindicate. Questi parametri indicano al ricevitore il componente collegato a un terminale specifico, in modo che corrisponda ai tasti del telecomando. Premere RETURN una volta terminato. Il menù Other serve per fare delle impostazioni personalizzate secondo l’utilizzo del ricevitore.
VSX_516_Italian.fm Page 38 Friday, January 6, 2006 2:46 PM Capitolo 8: Come usare il sintonizzatore 4 Ascolto della radio I seguenti punti spiegano come sintonizzare le stazioni radio FM e AM e come memorizzare le frequenze per poterle richiamare successivamente. 1 Premere AM o FM per selezionare la banda di sintonizzazione desiderata. 2 Sintonizzare una stazione. Ci sono tre modi per fare questo: Sintonizzazione automatica – Tenere premuto TUNING +/– per un secondo circa.
VSX_516_Italian.fm Page 39 Friday, January 6, 2006 2:46 PM Un’introduzione al sistema RDS • Radio Text (RT): messaggi inviati da una stazione radio. Ad esempio, un stazione radio di programmi parlati può fornire un numero di telefono come RT. • Program Service Name (PS): il nome della stazione radio. • Program Type (PTY): indica il tipo di programma in fase di trasmissione. • Frequenza corrente del sintonizzatore (FREQ).
VSX_516_Italian.fm Page 40 Friday, January 6, 2006 2:46 PM 5 Se desiderate continuare ad ascoltare la stazione, premere ENTER entro 5 secondi. Se non premete ENTER, la ricerca continua. Se l’indicazione NO PTY appare sul display, ciò significa che il sintonizzatore non è stato in grado di trovare il tipo del programma nel momento della ricerca.
VSX_516_Italian.fm Page 41 Friday, January 6, 2006 2:46 PM Capitolo 9: Come fare le registrazioni 5 Avviare la registrazione, poi avviare la riproduzione del componente fonte. Deutsch E’ possibile fare una registrazione audio o video dal sintonizzatore incorporato o da un’altra fonte audio o video collegata al ricevitore (ad esempio un lettore CD o un televisore). English Come fare una registrazione audio o video Vedere le istruzioni in dotazione con il registratore se non si sa come procedere.
VSX_516_Italian.fm Page 42 Friday, January 6, 2006 2:46 PM Capitolo 10: Riproduzione USB Uso dell’interfaccia USB Solo per il modello VSX-516 È possibile ascoltare audio a due canali 1 mediante l’interfaccia USB presente sul lato frontale del ricevitore. Collegare un dispositivo di archiviazione di massa USB2 come indicato di seguito. 1 Premere USB (SHIFT+CD). 2 Collegare il dispositivo USB. Il terminale USB si trova sul pannello frontale. 3 Premere (riproduzione) per avviare la riproduzione.
VSX_516_Italian.fm Page 43 Friday, January 6, 2006 2:46 PM Compatibilità dell’audio compresso • Riproduzione a velocità di bit variabile VBR (Variable Bit Rate) MP3/WMA/MPEG-4 AAC: Sì1 L’acronimo WMA sta per Windows Media Audio e si riferisce ad una tecnologia di compressione dati audio sviluppata da Microsoft Corporation. Questa unità riproduce i file WMA codificati usando Windows Media® Player, con estensione ‘.wma’.
VSX_516_Italian.fm Page 44 Friday, January 6, 2006 2:46 PM Capitolo 11: Informazioni addizionali Localizzazione dei guasti Le operazioni errate sono spesso interpretate come problemi o malfunzionamenti. Se si sospetta qualche problema nel componente, si prega di controllare i punti qui sotto. A volte, il problema rimane in un altro componente. Esaminare gli altri componenti ed apparecchi elettrici usati.
VSX_516_Italian.fm Page 45 Friday, January 6, 2006 2:46 PM • Spostare la piastra dal ricevitore finché non scompare il rumore. Non viene emesso alcun suono o rumore alla riproduzione di software con DTS. • Impostare il livello del volume digitale del lettore al massimo o nella posizione neutra. Quando viene effettuata la ricerca in riproduzione, il lettore CD DTS compatibile emette rumore.
VSX_516_Italian.fm Page 46 Friday, January 6, 2006 2:46 PM 2 Mantenendo premuto il tasto TONE, premere e mantenere premuto il tasto STANDBY/ON per tre secondi circa. mobile, ecc., sul cavo d’alimentazione o premere il cavo stesso. Non annodare mai il cavo e non bisogna mai legare il cavo d’alimentazione insieme ad altri cavi. Far passare i cavi d’alimentazione in modo tale che non sia possibile calpestare gli stessi. Un cavo d’alimentazione danneggiato può causare un incendio o dare scosse elettriche.
VSX_516_Italian.fm Page 47 Friday, January 6, 2006 2:46 PM Sezione video • Ingresso (Sensibilità/Impedenza) DVR/VCR, DVD/LD, TV/SAT. . . . . . . . 1 Vp-p/75 Ω • Uscita (Livello/Impedenza) DVR/VCR, MONITOR OUT. . . . . . . . . 1 Vp-p/75 Ω Risposta di frequenza DVR/VCR, DVD/LD, TV/SAT MONITOR. . . . . . .5 Hz a 7 MHz dB Rapporto segnale/rumore. . . . . . . . . . . . . . 55 dB Diafonia (crosstalk) . . . . . . . . . . . . . . . . . . .
VSX_516_Italian.
VSX_516_Italian.
VSX_516_Italian.fm Page 50 Friday, January 6, 2006 2:46 PM Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.