User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
99
En
– [ ]: The curve quickly rises. (When the crossfader is moved
away from the edge of [A] side, the sound is immediately output
from the [B] side.)
– [ ]: This curve is between other curves.
– [ ]: The curve slowly rises. (When the crossfader is moved
away from the edge of [A] side, the volume on the [B] side slowly
rises and the volume on the [A] side slowly descends.)
Using the AUX function
1 Switch the AUX selector switch.
– OFF: Mutes the input sound.
– LINE: Use this when connected to other than a portable device.
– PORTABLE: Use this when connected to a portable device.
2 Turn the [TRIM] knob.
Adjust the level of sound input to the [AUX IN] channel.
Using a microphone
1 Connect a microphone to the [MIC1] input terminal or [MIC2] input
terminal.
2 Set the [MIC (OFF, ON)] switch to [ON].
• The [MIC (OFF, ON)] indicator lights up.
3 Turn the [MIC1 LEVEL] knob or [MIC2 LEVEL] knob.
Adjust the volume of the sound output from the [MIC] channel.
• The sound comes out at a loud volume if the knob is turned all the way to the
right.
4 Input audio to the microphone.
Adjusting the sound quality
Turn the [MIC EQ (HI, MID, LOW)] knob of the [MIC] channel.