User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
106
En
PITCH
Changes the pitch of the original sound.
Buttons & knobs
[BEAT , ] buttons (parameter: -50% to 100%)
[TIME] knob (parameter: -50% to 100%)
[LEVEL/DEPTH] knob (parameter: Sets the pitch of the effect sound.
When you turn the knob all the way counterclockwise, the setting
returns to the pitch of the original sound.)
[X-PAD] (parameter: Sets the pitch of the effect sound.)
SLIP ROLL
The sound being input at the point when you press the [ON/OFF]
button is recorded, and the recorded sound comes out repeatedly
according to the beat you set with the [BEAT , ] buttons.
• When the effect time changes, the input sound is recorded again.
Buttons & knobs
[BEAT , ] buttons (parameter: 1/16 to 16 beats)
[TIME] knob (parameter: 10 msec to 4 000 msec)
[LEVEL/DEPTH] knob (parameter: Sets the balance between the
original sound and Roll sound.)
[X-PAD] (parameter: Sets the effect time.)
ROLL
The sound being input at the point when you press the [ON/OFF]
button is recorded, and the recorded sound comes out repeatedly
according to the beat you set with the [BEAT , ] buttons.
Buttons & knobs
[BEAT , ] buttons (parameter: 1/16 to 16 beats)
[TIME] knob (parameter: 10 msec to 4 000 msec)
[LEVEL/DEPTH] knob (parameter: Sets the balance between the
original sound and Roll sound.)
[X-PAD] (parameter: Sets the effect time.)