Datasheet

Software tool
PNOZmulti Configurator
PNOZmulti Configurator
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
904
} Enabling switch
} Operating mode selector switches
} Press functions
} Light beam device
} Light grid
} Pressure sensitive mat
} Speed monitoring
} Muting
Users can configure fieldbus inputs and outputs in conjunction with the fieldbus modules.
These inputs and outputs can only be used for standard functions.
Virtual inputs and outputs can be configured via the integrated interface. They are handled
in exactly the same way as fieldbus inputs and outputs.
Inputs and outputs for standard functions are supported.
The PNOZmulti Configurator contains a wide range of test and diagnostic options, such as:
} Dynamic program display
} Diagnostic word for evaluating the element status
} Display PNOZmulti error stack
The project can be protected through passwords.
Licences and versions
In order to use the full scope of the PNOZmulti Configurator, you will need a valid licence in
addition to the software package.
Without a licence, the PNOZmulti Configurator can only be used in a demo version.
A range of licences are available to meet varying requirements:
} Basic Licence
Single user licence, issued to one owner (company name and location/project must be
stated)
} User Licence
Discounted licence for an additional workstation, issued to the owner of a basic licence.
} Lite Licence
Licence limited to the base units PNOZ m0p and the base units PNOZmulti Mini, for
use on one workstation.
} Multi-user Licence
Multi-user licence, graduated according to the number of workstations (up to 25, 50,
100 and over 100)
} Project Licence
Licence to use the software within a contractually limited framework.