Datasheet

PNOZmulti Mini products
Fieldbus modules
PNOZ mmc12p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
654
PNOZ mmc12p
Overview
Unit features
Using the product PNOZ mmc12p:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti Mini .
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for Ethernet POWERLINK (Ethernet POWERLINK V 2 protocol)
} Station addresses from 1 ... 239, selected via rotary switch
} The minimum cycle time for an application of 20 Byte Output and 20 Byte Input is
250µs. The minimum cycle time is 450 µs at the maximum PDO size of 254 Byte Input
and 20 Byte Output (the inputs and outputs in this case are viewed from the Managing
Node).
} 24 virtual inputs and outputs on the control system PNOZmulti can be defined in the
PNOZmulti Configurator for communication with the fieldbus Ethernet POWERLINK .
The number of inputs and outputs can be extended to 128. Please note that when the
extended inputs and outputs 24 - 127 are used they have different properties (see doc-
ument entitled "Communication Interfaces").
} Max. 1 PNOZ mmc12p can be connected to the base unit
} For details of the PNOZmulti Mini base units that can be connected, please refer to the
document "PNOZmulti System Expansion".