Datasheet

PNOZmulti products
Speed monitors
PNOZ ms2p TTL (Coated Version)
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
312
– SHAFT 2
– X12
– X22
Function description
Operation
The speed monitor can independently monitor two axes for standstill, speed and direction
of rotation. The speed monitor signals the status of the monitored values to the base unit.
Depending on the safety circuit loaded, the values can be transferred from the base unit,
e.g. to a relay output on the safety system. Incremental encoders and/or proximity detectors
can be used to record the values.
The configuration of the speed monitor is described in detail in the PNOZmulti Configur-
ator's online help.
Block diagram
RJ45 RJ45
Input device types
Proximity switch
Requirements of the proximity switches
} Only "pnp" type proximity switches may be used (N/O contact, switching to positive).
} The proximity switches require a 24 VDC supply.