Datasheet

PNOZmulti products
Input modules
PNOZ mi1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
160
Inputs 773400 773405
Input voltage in accordance with
EN 61131-2 Type 1
24 V DC 24 V DC
Min. pulse duration 18 ms 18 ms
Pulse suppression 0,6 ms 0,6 ms
Maximum input delay 4 ms 4 ms
Potential isolation No No
Times 773400 773405
Switch-on delay 5,00 s 5,00 s
Supply interruption before de-ener-
gisation
20 ms 20 ms
Simultaneity, channel 1 and 2 max. 3 s 3 s
Simultaneity in the two-hand circuit 0,5 s 0,5 s
Environmental data 773400 773405
Ambient temperature
In accordance with the standard EN 60068-2-14 EN 60068-2-14
Temperature range 0 - 60 °C -25 - 60 °C
Forced convection in control
cabinet off
55 °C –
Storage temperature
In accordance with the standard EN 60068-2-1/-2 EN 60068-2-1/-2
Temperature range -25 - 70 °C -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78 EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C
Condensation during operation Not permitted Short-term
EMC EN 61131-2 EN 61131-2
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 150,0 Hz 5,0 - 500,0 Hz
Acceleration 1g 1g
Broadband noise
In accordance with the standard – EN 60068-2-64
Frequency – 5 - 500 Hz
Acceleration – 1,9grms
Corrosive gas check
SO2: Concentration 10ppm,
duration 10days, passive – DIN V 40046-36
H2S: Concentration 1ppm, dur-
ation 10days, passive
– DIN V 40046-37