Datasheet

PNOZmulti products
Base units
PNOZ m2p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
128
Environmental data 773120 773123
Protection type
In accordance with the standard EN 60529 EN 60529
Mounting area (e.g. control cab-
inet) IP54 IP54
Housing IP20 IP20
Terminals IP20 IP20
Potential isolation 773120 773123
Potential isolation between SC output and system voltage SC output and system voltage
Type of potential isolation Protective separation Protective separation
Rated surge voltage 2500 V 2500 V
Potential isolation between RL output and system voltage RL output and system voltage
Type of potential isolation Protective separation Protective separation
Rated surge voltage 6000 V 6000 V
Mechanical data 773120 773123
Mounting position Horizontal on top hat rail Horizontal on top hat rail
DIN rail
Top hat rail 35 x 7,5 EN 50022 35 x 7,5 EN 50022
Recess width 27 mm 27 mm
Max. cable length
Max. cable length per input 1,0 km 1,0 km
Sum of individual cable lengths
at the test pulse output
40 km 40 km
Material
Bottom PPO UL 94 V0 PPO UL 94 V0
Front ABS UL 94 V0 ABS UL 94 V0
Connection type Spring-loaded terminal, screw
terminal
Spring-loaded terminal, screw
terminal
Conductor cross section with screw
terminals
1 core flexible 0,25 - 1,50 mm², 24 - 16 AWG 0,25 - 1,50 mm², 24 - 16 AWG
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,25 - 0,75 mm², 24 - 20 AWG 0,25 - 0,75 mm², 24 - 20 AWG
Conductor cross section with screw
terminals (relay outputs)
1 core flexible 0,25 - 2,50 mm², 24 - 12 AWG 0,25 - 2,50 mm², 24 - 12 AWG
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,25 - 1,50 mm², 24 - 16 AWG 0,25 - 1,50 mm², 24 - 16 AWG
Torque setting with screw terminals 0,25 Nm 0,25 Nm
Torque setting with screw terminals
(relay outputs)
0,50 Nm 0,50 Nm