Datasheet

PNOZmulti products
Analogue input module
PNOZ ma1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
243
Analogue inputs 773812 773813
Deviations from the measuring
range limit value
Output variable error at 25 ℃ 0,5 % 0,5 %
Temperature coefficient 0,0025 %/K 0,0025 %/K
Greatest transient deviation dur-
ing el. interference test 1,0 % 1,0 %
Max. measurement error at full
temperature range 0,5 % 0,5 %
Max. measurement error in the
case of a potential module error
1,5 % 1,5 %
Max. voltage between inputs I0 and
I1 with current or voltage measure-
ment
30 V 30 V
Filter time constant 2,0 ms 2,0 ms
Potential isolation No No
Times 773812 773813
Switch-on delay 5,00 s 5,00 s
Supply interruption before de-ener-
gisation
20 ms 20 ms
Max. reaction time when the input
signal changes
100 ms 100 ms
Environmental data 773812 773813
Ambient temperature
In accordance with the standard EN 60068-2-14 EN 60068-2-14
Temperature range 0 - 60 °C -25 - 60 °C
Forced convection in control
cabinet off
55 °C 55 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2 EN 60068-2-1/-2
Temperature range -25 - 70 °C -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78 EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C
Condensation during operation Not permitted Short-term
EMC EN 61131-2 EN 61131-2
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 150,0 Hz –
Acceleration 1g 1g
Broadband noise
In accordance with the standard – EN 60068-2-64
Frequency – 5 - 500 Hz
Acceleration – 1,9grms