User Manual

PSEN cs4.1n
Operating Manual PSEN cs4.1n
22180-EN-03
20
Electrical data
Max. cable capacitance at the safety outputs
No-load, PNOZ with relay contacts 400 nF
PNOZmulti, PNOZelog, PSS 400 nF
Max. inrush current impulse
Current pulse, A1 0,58 A
Pulse duration, A1 1 ms
No-load current 20 mA
Semiconductor outputs
OSSD safety outputs 2
Switching current per output 100 mA
Breaking capacity per output 2,4 W
Potential isolation from system voltage No
Short circuit-proof ja
Residual current at outputs 20 µA
Voltage drop at OSSDs 3,5 V
Lowest operating current 0 mA
Utilisation category in accordance with EN 60947-1 DC-12
Times
Test pulse duration, safety outputs 450 µs
Switch-on delay
after UB is applied 1 s
Actuator typ. 45 ms
Actuator max. 120 ms
Delay-on de-energisation
Actuator typ. 40 ms
Actuator max. 260 ms
Supply interruption before de-energisation 10 ms
Simultaneity, channel 1 and 2 max. ∞
Environmental data
Ambient temperature
In accordance with the standard EN 60068-2-14
Temperature range -25 - 70 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2
Temperature range -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-78
Humidity 93 % r. h. at 40 °C
EMC EN 60947-5-3
Vibration
In accordance with the standard EN 60947-5-2
Frequency 10 - 55 Hz
Amplitude 1 mm