Datasheet

        CCA 
398
PHOENIX CONTACT
Fuse terminal blocks with screw cap
UK 10-DREHSI
Notes:
For further technical notes on power dissipation, refer to page 616.
1
) If the fuse is faulty, the downstream circuit is not off load.
2
) The current is determined by the fuse used, the voltage by the
LED display. Observe max. power dissipation.
– Bridgeable with FBI ... fixed bridge
– Fuse terminal block with screw cap for
5x20, 5x25 or 6.3x32mm fuse
inserts
– Versions with LED display for indicating
that a fuse has blown
– When selecting and using cartridge fuse
terminal inserts, IEC60127-6/
DINEN60127-6 should be observed
– UK10-DREHSI/K is suitable for fuse
inserts with indicator pins. The
transparent screen on the screw cap
allows the blown fuse to be quickly
identified in these inserts.
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 12 62 57.2 12 62 57.2 12 62 57.2
Dimensions Width Length Height NS 32
[mm] 12 62 62.2 12 62 62.2 12 62 62.2
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
10
2
) 500
2
) 0.5 - 16 24-6 10
IEC 60947-7-3 
Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 500
2
) 300 300 - 500
Nominal current / cross section [A] / [mm²] 10
2
) / 1.5 20 / - 20 / - - 10
Rated cross section [mm²]16--- 16--- 16---
Cross section range AWG 20 - 6 24-6 22-6 - 20 - 6 24-6 - - 20 - 6 24-6 22-6 -
Connection capacity Solid Stranded Ferrule
  without/with plastic sleeve
1 conductor [mm²] 0.5 - 16 0.5 - 16 0.5 - 10 0.5 - 10 0.5 - 16 0.5 - 16 0.5 - 10 0.5 - 10 0.5 - 16 0.5 - 16 0.5 - 10 0.5 - 10
2 conductors (of the same type) [mm²] 0.5 - 4 0.5 - 4 0.5 - 4 - 0.5 - 4 0.5 - 4 0.5 - 4 - 0.5 - 4 0.5 - 4 0.5 - 4 -
2 stranded conductors with a TWIN ferrule [mm²] - - - 0.5 - 10 - - - 0.5 - 10 - - - 0.5 - 10
Max. cross section with insertion bridge [mm²] 10 10 - - 10 10 - - 10 10 - -
General data
Fuse type / dimensions – / [mm] G / 5 x 20
Stripping length [mm] 11
Screw thread M4
Tightening torque [Nm] 1.5 - 1.8
Insulating material PA
Inflammability class according to UL 94 V0
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Fuse terminal block, for mounting on NS32... or
NS35..., for cartridge fuse inserts 5x20, 5x25,
6.3x32mm
black UK 10-DREHSI (5X20) 3005109 50
.../K with indicator pin black
Fuse terminal block, for mounting on NS32... or
NS35..., for cartridge fuse inserts 5x20,
6.3x32mm, with LED display for 5 – 15VDC
1
)
black UK 10-DREHSILED 12 (5X20) 3005112 50
Fuse terminal block, for mounting on NS32... or
NS35..., for cartridge fuse inserts 5x20,
6.3x32mm, with LED display for 15 – 30VDC
1
)
black UK 10-DREHSILED 24 (5X20) 3005138 50
Fuse terminal block, for mounting on NS32... or
NS35..., for cartridge fuse inserts 5x20,
6.3x32mm, with LED display for 30 – 60VDC
1
)
black UK 10-DREHSILED 60 (5X20) 3005154 50
Fuse terminal block, for mounting on NS32... or
NS35..., for cartridge fuse inserts 5x20,
6.3x32mm, with LED display for 110 –
250VDC
1
)
black UK 10-DREHSILA 250 (5X20) 3005170 50
Accessories
Fixed bridge, insulated
10 silver FBI 10-12 63 A 0203454 10
Insertion bridge, fully insulated
10 gray EB 10-12 63 A 3006137 10
Test socket, for test connection with test plug PS silver PSB 4/7/6 0303299 10
Test socket, insulated, for UK6N, UK10N and
URTK/SP and USST10 terminal blocks, M4 thread
transparent PSBJ 4/15/6 FARBLOS 0303419 10
Screwdriver SZS 1,0X4,0 VDE 1205066 10
Lateral groove marking ZB 6 (see Catalog 5)
Terminal blocks
UK universal terminal blocks
16 (16) mm², 10 A, fuse terminal block for
5 x 20 mm cartridge fuses