Datasheet

  
382
PHOENIX CONTACT
Three-level and three-conductor
initiator terminal blocks DIK1,5...
and DIKD1,5...
The sensor and actuator conductors are
wired in terminal boxes in order to reduce
wiring costs. The positive and negative
connections are grouped so that only the
signal lines and one pair of conductors for
the power supply need to be wired between
the terminal box and the control.
DIK1,5
– The upper level accommodates the feed-
through terminal blocks for the signal line
which can be marked
– The two bottom terminal points supply
the initiator with potential
– The lower terminal points can be bridged
using a divisible insertion bridge
DIKD1,5
– The positive and negative potential can be
fed into the insertion bridges via this
power terminal
– The first initiator can also be connected
to this three-conductor feed-through
terminal block
DIKD 1,5-PV
– Space-saving potential distributor
terminal block
– Bridgeable upper level makes potential
distribution over more than 6 terminal
points possible
– The potential distributor terminal block is
available with a gray, blue or black
insulating housing for clear potential
demarcation
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 6.2 55 54.5 6.2 72.5 54.5 6.2 72.5 54.5 6.2 72.5 54.5
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
26 250 0.2 - 4 30-14 30 250 0.2 - 4 30-14 30 250 0.2 - 4 30-14 32 250 0.2 - 4 30-14
IEC 60947-7-1 
Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 250 300 300 - 250 300 300 - 250 300 - - 250 300 300 -
Nominal current / cross section [A] / [mm²] 24 / 2.5 15 / - 15 / - - 24 / 2.5 15 / - 15 / - - 24 / 2.5 15 / - - - 24 / 2.5 15 / - 15 / - -
Rated cross section [mm²]2.5--- 2.5--- 2.5--- 2.5---
Cross section range AWG 24 - 12 30-14 28-14 - 24 - 12 30-14 28-14 - 24 - 12 30-14 - - 24 - 12 30-14 28-14 -
Connection capacity Solid Stranded Ferrule
  without/with plastic sleeve
1 conductor [mm²] 0.2 - 4 0.2 - 2.5 0.25 - 2.5 0.25 - 2.5 0.2 - 4 0.2
2 conductors (of the same type) [mm²] 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1 0.2 - 1 0.25 - 1
2 stranded conductors with a TWIN ferrule [mm²] - - - 0.5 - 1 - - - 0.5 - 1 - - - 0.5 - 1 - - - 0.5 - 1
Max. cross section with insertion bridge [mm²] 4 2.5 - - 4 2.5 - - 4 2.5 - - 4 2.5 - -
General data
Stripping length [mm] 8
Screw thread M3
Tightening torque [Nm] 0.5 - 0.6
Insulating material PA
Inflammability class according to UL 94 V2
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Terminal block, for mounting on NS 35... gray DIK 1,5 2715966 50
blue DIK 1,5 BU 2716059 50
Terminal block, with three through contacts, for
mounting on NS 35...
gray
blue
Terminal block, with through contacts in the
upper and middle levels, for mounting on NS35...
gray
Terminal block, with equipotential bonder, for
mounting on NS 35...
gray
blue
black
Accessories
Fixed bridge, insulated
10 silver FBI 10- 6 24 A 0203250 10
Insertion bridge, for middle and lower levels
10 blue EB 10- DIK BU 24 A 2716680 10
10 red EB 10- DIK RD 24 A 2716774 10
10 gray EB 10- DIK GY 24 A 2715937 10
80 blue EB 80- DIK BU 24 A 2715940 1
80 red EB 80- DIK RD 24 A 2715953 1
80 white EB 80- DIK WH 24 A 2715788 1
Partition plate, 2mm width gray ATP-DIK 1,5 1413272 50
Screwdriver SF-SL 0,6X3,5-100 S-VDE 1212587 10
Marker strips, for middle and lower level SK 6,2/3,8 (see Catalog 5)
Marking for upper level ZB 6 (see Catalog 5)
Terminal blocks
UK universal terminal blocks
2.5 (4) mm², 26 A, three-conductor initiator
terminal block