Datasheet

          
Technical data
1
) Technical data
1
)
Dimensions Width Length Height Width Length Height
[mm] 5.2 59.5 44 (NS 35/7,5) 5.2 59 46.3 (NS 35/7,5)
Max. electrical data I
max.
[A]  U
max.
[V]  max. Ø [mm²] AWG (UL) I
max.
[A]  U
max.
[V]  max. Ø [mm²] AWG (UL)
 24 800 0.14 - 4 26-12 24 250 0.14 - 4 26-12
Max. bridge current [A] 24 (FBS) / 17.5 (FBSR)  24 (FBS) / 17.5 (FBSR)
Rated data IEC UL / CUL CSA Ex IEC UL / CUL CSA Ex
Rated voltage [V] 800 600 - - 250 600 - -
Nominal current / cross section [A] / [mm²] 24 / 4 20 / - - - 24 / 2.5 20 / - - -
Rated cross section [mm²] 4 4
Connection capacity solid stranded Ferrule
without/with plastic sleeve
solid stranded Ferrule
without/with plastic sleeve
1 conductor [mm²] 0.14 - 4 0.14 - 4 0.14 - 2.5 0.14 - 2.5 0.14 - 4 0.14 - 4 0.14 - 2.5 0.14 - 2.5
Ordering data Ordering data
Description Color Type  Order No.
Pcs. /
Pkt.
Type  Order No.
Pcs. /
Pkt.
Terminal block gray PTI 2,5 ① 3213968 50
blue PTI 2,5 BU ① 3213969 50
Ground terminal green-yellow PTI 2,5-PE ② 3213962 50
Neutral disconnect terminal block blue PTN 2,5 ① 3213963 50
Accessories
1
) Accessories
1
)
Cover, width 2.2 mm gray D-DTI 2,5 3034824 50 D-PTN 2,5 3213977 50
Support bracket, to hold the neutral busbar, set
every 20 cm, 2 mm wide
blue AB-PTI 3214006 50 AB-PTI 3214006 50
126 PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
2.5 mm PT... push-in connection terminal blocks
24 A, feed-through terminal block 24 A, neutral disconnect terminal block
Notes:
1
) For additional accessories and technical data, see page 110.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
Installation terminal blocks
②
①
①