Datasheet

For further information and full technical data, visit phoenixcontact.net/products
Ordering data
Description  Type Order No.
Pcs. /
Pkt.
Pre-assembled bridge, marked
3-pos., positions 1, 3 FBS 1/3-8 3032363 10
4-pos., positions 1, 4 FBS 1/4-8 3032376 10
5-pos., positions 1, 3, 5 FBS 1/3/5-8 3032389 10
10-pos., positions 1, 4, 7, 10 FBS 1/4/7/10-8 3032402 10
When using bridges in conjunction
with the FAME plug-in test system,
the maximum permissible bridge
current is 24A.
– Plug-in star-point jumpers or jumpers for
bridging several positions can be supplied
pre-configured without additional
expense
– The bridges are printed and provide
unique identification for bridging between
non-adjacent terminal blocks
Pre-assembled bridge, red, 8.2 mm
pitch
Sector-specific solutions
Solutions for energy technology
Technical data
General data
Material PVC
Ordering data
Description  Color Type  Order No.
Pcs. /
Pkt.
Cover profile, supply length 1m transparent AP-FTP METER 3069899 1
Cover profile, supply length 1m transparent AP-ME METER 3034361 10
Cover profile, supply length 1m transparent AP RSC-T 3059139 10
End bracket, for AP-ME cover profile gray APH-ME 3034374 10
Cover profile holder, can be snapped on and
sealed
gray APH-UTWE 6-2 3069057 10
539
PHOENIX CONTACT
– The AP–FTP cover profile prevents
undesired changes to the star point, feed-
through, and short-circuit jumpers on the
completely assembled test plug
– To mount, gently release the side screw
connection of the plug and snap the
profile into place
– The APH–ME end bracket is used in
conjunction with the AP–ME cover for
the DIN rail mounted test terminal strip
Cover profiles for test plug or test
terminal strip mounted on DIN rail