Datasheet

For further information and full technical data, visit phoenixcontact.net/products
561PHOENIX CONTACT
Sector-specific solutions
Solutions for energy technology
The compact and modular design of the
system, as well as the plugs and test blocks,
provides the right number of positions for
every application.
The patented wall fastening is easy to use
and has a robust design. Large tolerances in
the plate cutout of up to 4mm are
compensated for by the eccentric tappet
function.
Thanks to the optional use of jumpers, all
test circuits can be implemented in the plug.
Staggered test sockets enable the use of
safety test leads in a confined space.
The transducer block offers two function
shafts for short-circuit jumpering on the
control cabinet exterior. The operating plug
safely covers the short-circuit jumpers in
normal operation.
In addition to the two marking grooves,
the test blocks also offer two function
shafts inside the control cabinet, which are
used, forexample, to form the star point
with the help of jumpers.
The robust latching of the operating plug
can only be released with two-hand
operation.
The operating plug is protected against
unauthorized actuation thanks to the
optional seal.
Large-surface marking options on the
inside and outside of the control cabinet
enable the clear identification of each
terminal point.
The pre-assembled test terminal strips
can be mounted in a space-saving way in the
control cabinet by simply snapping the
E-UTWE6 adapter onto standard NS35
DIN rails.