Datasheet
For further information and full technical data, visit phoenixcontact.net/products
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 6.2 52 57.3
Dimensions Width Length Height NS 32
[mm] 6.2 52 62.3
Max. electrical data I
max.
[A] U
max.
[V] Max. Ø [mm²] AWG (UL)
41 500 0.2 - 6 24-10
IEC 60947-7-1
Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 500 600 - -
Nominal current / cross section [A] / [mm²] 32 / 4 30 / - - -
Rated cross section [mm²] 4 - - -
Cross section range AWG 24 - 10 24-10 - -
Connection capacity Solid Stranded Ferrule
without/with plastic sleeve
1 conductor [mm²] 0.2 - 6 0.2 - 4 0.25 - 4 0.25 - 2.5
2 conductors (of the same type) [mm²] 0.2 - 1.5 0.2 - 1.5 0.25 - 1.5 -
2 stranded conductors with a TWIN ferrule [mm²] - - - 0.5 - 2.5
General data
Stripping length [mm] 10
Screw thread M3
Tightening torque [Nm] 0.6 - 0.8
Insulating material PA
Inflammability class according to UL 94 V0
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Terminal block, for mounting on NS32... or
NS35...
gray USST 4 3070338 50
Accessories
Cover, width 2.2 mm gray D-USST 4/10 3070370 50
Partition plate, 2mm wide gray TPNS-UK 0706647 50
Fixed bridge, insulated
10 silver FBI 10- 6 38 A 0203250 10
Isolator bridge bar, can be separated, with 10 screws, for
switchable branches with IS-K...
10 silver ISSBI 10- 6 30 A 0301505 10
Bridge bar isolator, as distance piece for isolator
bridge bar
gray IS-K 4 1302338 100
Separating disk, for separation of neighboring
bridges, can be fitted later, no loss of pitch
gray TS-USST 4/10 3070383 50
Test socket silver PSB 3/10/4 0601292 10
Test socket, insulated, can be used only with FBI
and ISSBI
silver PSBJ 3/13/4 0201304 10
Screwdriver SF-SL 0,6X3,5-100 S-VDE 1212587 10
Lateral groove marking UC-TM 6, UCT-TM 6 or ZB 6
(see Catalog 5)
455
PHOENIX CONTACT
– The USST... terminal blocks were
developed especially for use in the energy
supply sector
– When combined with hook-type cable
lugs, the spring-assisted screw terminal
blocks optimally meet the technical
requirements of ENATS50-18
– Universal foot for mounting on NS32 and
or NS35 DIN rails
– The bridge bar isolator switching jumpers
ISSBI... enable switchable cross
connections with IS-K... . The screw
functions as a current-carrying switching
element
– Large marking option of every terminal
point
Space-saving conductor connection
The flat-ribbon cable lugs with
C-BCI ... SO hooks enable vertical crimping
(see figure below), which means that
conductors in the nominal cross-section
can be wired without loss of pitch in a way
that saves space. Further information about
flat-ribbon cable lugs with hooks can be
found at phoenixcontact.net/products.
Spring-assisted feed-through terminal
block USST4
Terminal blocks
USST spring-assisted screw terminal blocks
4 (6) mm², 41 A, feed-through terminal block
Notes:
Corresponding flat-ribbon cable lugs with C-BCI... hooks can be
found in Catalog 5 or at phoenixcontact.net/products