Datasheet

  
386
PHOENIX CONTACT
Three-level and three-conductor
actuator terminal blocks with PE foot
DOK1,5...
Notes:
1
) Current and voltage are determined by the plug used.
2
) LED display: Voltage 15–30VDC, current 1–2.5mA
3
) The corresponding accessory is documented, see page 412.
– Same shape as the three-level initiator
terminal blocks DIK...
– The upper level accommodates the feed-
through terminals for the signal line which
can be marked
– The middle level supplies the connected
actuators with voltage
– Unlike the DIK terminal blocks, the lower
level of these output terminal blocks
makes direct contact with the DIN rail
and as a PE connection they are marked
green-yellow
– Convenient bridging of up to 80 terminal
blocks with divisible insertion bridges
– The forks of the insertion bridge can be
easily loosened for jumping bridging
– Alternate wiring of an actuator followed
by an initiator is easy
– Because the spine of the insertion bridge
can be snapped into place with the
terminal block housing, all the terminal
points can be wired freely and the bridge
can be securely positioned
– Terminal blocks with LED displays in red
and green are available for optical
identification of the initiator and actuator
wiring
– The component terminal block
DOKD 1,5-TG can accommodate the
fuse plug or the isolating connector
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 6.2 61.5 54.5 6.2 62.5 54.5 6.2 61 54.5 6.2 63 54.5
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
26 250 0.2 - 4 30-14 26 250 0.2 - 4 30-14 16
IEC 60947-7-1 / IEC 60947-7-2 
Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 250 300 300 - 250 300 300 - 250
Nominal current / cross section [A] / [mm²] 24 / 2.5 15 / - 15 / - - 24 / 2.5 15 / - 15 / - - 16
Rated cross section [mm²]2.5--- 2.5--- 2.5--- 2.5---
Cross section range AWG 24 - 12 30-14 28-14 - 24 - 12 30-14 28-14 - 24 - 12 30-14 28-14 - 24 - 12 30-14 28-14 -

Disconnect level rated data IEC UL / CUL CSA IEC/
EN60079-7
Nominal current / cross section [A] / [mm²] - - - - - - - - 16
Connection capacity Solid Stranded Ferrule
  without/with plastic sleeve
1 conductor [mm²] 0.2 - 4 0.2 - 2.5 0.25 - 2.5 0.25 - 2.5 0.2 - 4 0.2
2 conductors (of the same type) [mm²] 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1 0.2 - 1 0.25 - 1
2 stranded conductors with a TWIN ferrule [mm²] - - - 0.5 - 1 - - - 0.5 - 1 - - - 0.5 - 1 - - - 0.5 - 1
Max. cross section with insertion bridge [mm²] 4 2.5 - - 4 2.5 - - 4 2.5 - - 4 2.5 - -
General data
Stripping length [mm] 8
Screw thread M3
Tightening torque [Nm] 0.5 - 0.6
Insulating material PA
Inflammability class according to UL 94 V2
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Terminal block, for mounting on NS 35... gray DOK 1,5 2717016 50
Terminal block, with red (RD) LED between the
upper and middle levels, for mounting on NS35...
2
)
gray DOK 1,5-LA 24RD/O-M 2717029 50
Terminal block, with green (GN) LED between
the upper and middle levels, for mounting on
NS35...
2
)
gray DOK 1,5-LA 24GN/O-M 2717074 50
Terminal block, with through contacts in the
upper and lower levels, for mounting on NS35...
gray
Basic terminal block, for mounting on NS35...
3
) gray
Accessories
Insertion bridge, for middle and lower levels, fully insulated
10 gray EB 10- DIK GY 26 A 2715937 10
10 red EB 10- DIK RD 26 A 2716774 10
10 blue EB 10- DIK BU 26 A 2716680 10
80 blue EB 80- DIK BU 26 A 2715940 1
80 red EB 80- DIK RD 26 A 2715953 1
80 white EB 80- DIK WH 26 A 2715788 1
Fixed bridge, insulated
10 silver FBI 10- 6 26 A 0203250 10
Partition plate, 2mm width gray ATP-DIK 1,5 1413272 50
Screwdriver SF-SL 0,6X3,5-100 S-VDE 1212587 10
Marker strips,for middle and lower level SK 6,2/3,8 (see Catalog 5)
Marking for the upper level ZB 6 (see Catalog 5)
Terminal blocks
UK universal terminal blocks
2.5 (4) mm², 26 A, three-conductor actuator
terminal block with PE foot