Datasheet

 
Ex:  
SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SE
Technical data
Dimensions Width Length Height NS 35/15
[mm] 29 184 74.5 41 235 84.5 49 265 90.8 54.8 283.5 99.3
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
192 1500
2
) 6 - 70 - 309 1500
IEC 60947-7-1

Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 1500
2
) 600 - 690 1500
Nominal current / cross section [A] / [mm²] 192 / 70 175 / - - 187 / 70 309 / 150 310 / - 310 / - 309 / 150 415 / 240 420 / - 420 / - 415 /
Rated cross section [mm²] 70 - - 2.5 - 70 150 - - 6 - 150 240 - - 10 - 240 300 - - 25-300
Cross section range AWG 8 - 2/0 - - 8 - 2/0 10 - 300 10 - 350 10 - 350 10 - 300 8 - 500 8 - 600 8 - 600 8 - 500 4 - 600 4 - 1000 4 - 1000 4 - 60
Connection capacity, DIN 46234
Cable lugs, DIN 46234 [mm²] 2.5 - 70
Connection bolt / hole diameter / width [mm] 8 / 8.4 / 22
Connection capacity DIN 46235
Cable lugs, DIN 46235 [mm²] 16 - 70
Connection bolt / hole diameter / width [mm] 8 / 8.4 / 24
Connection capacity, DIN 46237
Cable lugs, DIN 46237 [mm²] 2.5 - 6
Connection bolt / hole diameter / width [mm] 8 / 8.4 / 14
blue 2.50 mm²
yellow 6.00 mm²
General data
Bolt thread M8
Tightening torque [Nm] 6 - 12
Insulating material PA
Inflammability class according to UL 94 V0
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Bolt connection terminal blocks, with covering
hood, for direct mounting or mounting on
NS35/15
gray RBO 8-HC 3247973 5
blue RBO 8-HC BU 3247974 5
black/yellow RBO 8-FE-HC 3247975 5
Block, 3-pos., (3x gray) gray RBO 8-3L-HC 3076044 2
Block, 4-pos., (3x gray, 1x blue) gray/blue RBO 8-3L/N-HC 3076086 2
Block, 4-pos., (3x gray, 1x black-yellow) gray/black-
yellow
RBO 8-3L/FE-HC 3076125 2
Block, 5-pos., (3x gray, 1x blue, 1x black-yellow) gray/blue/blac
k-yellow
RBO 8-3L/N/FE-HC 3076167 2
Accessories
1
)
Connection rail, for cross connection of high-current connectors
2 silver RBO 8-VS 2 192 A 3213179 10
3 silver RBO 8-VS 3 192 A 3213182 10
End bracket, aluminum, for screwing on, for end
support of 50 - 300mm² terminal blocks, can be
marked with ZB10, for mounting on NS35...
silver E/AL-NS 35 1201662 10
Terminal strip marker, adjustable height, for
CLIPFIX ... end clamp, can be marked with EML
(20x8) label or directly with B-STIFT or X-PEN
gray
Test plug, consisting of: metal part for 4 mm Ø
socket hole
And
Insulating sleeve for PS metal part red
Center groove marking UC-TM 12, UCT-TM 12 or ZB 12
(see Catalog 5)
484 PHOENIX CONTACT
RBO bolt connection terminal blocks
with covering hoods, for ring- and
fork-type cable lugs
Notes:
1
) For information on installation and using accessories for Ex
applications, see page 602.
2
) Cable lug must be insulated with shrink sleeve.
– With protective covers
– Compact connection with ring- and fork-
type cable lugs
– Potential distribution with connection
rails
– The covering hoods for the RBO 10,
RBO12, and RBO16 bolt terminal
blocks can be sealed to prevent
unauthorized opening. The lugs that can
be snapped on for this purpose are
supplied as standard.
– The RBO10, RBO12, and RBO16 have
a 4 mm test connection at the center of
the terminal block
– The covering hoods can be custom-
marked using the following labels:
0817028EML(51X25)R
0817031EML(51X25)RYE
0817002EML(51X25)RSR
Terminal blocks
RBO and RSC bolt connection terminal blocks
70 (70) mm², 192 A, feed-through terminal
block, for DIN rail and direct mounting