Datasheet
Product range overview
2.5mm
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
31
Disconnect and knife disconnect terminal blocks 33
Diode and LED terminal blocks 35
Installation terminal blocks 36
Mini feed-through terminal blocks and ground terminals 39
4mm
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
41
Fuse terminal blocks and lever-type disconnect terminal blocks
of the same shape
43
Disconnect and knife disconnect terminal blocks 45
Test disconnect terminal blocks 49
Diode terminal blocks 50
Installation terminal blocks 51
Mini feed-through terminal blocks and ground terminals 51
6mm
Feed-through terminal blocks and ground terminals 53
Fuse terminal blocks 53
Disconnect and knife disconnect terminal blocks 54
Test disconnect terminal blocks 56
Installation terminal blocks 58
10mm
Feed-through terminal blocks and ground terminals 61
Installation terminal blocks 61
16mm
Feed-through terminal blocks and ground terminals 63
Installation terminal blocks 63
35mm
Feed-through terminal blocks and ground terminals 65
Installation terminal blocks 65
50mm - 240mm
High-current terminal blocks 67
25
PHOENIX CONTACT
The UT... screw connection terminal
blocks from the CLIPLINE complete system
satisfy the most stringent requirements and
cover a wide area of application. They
impress with their maintenance-free
conductor connection and offer maximum
flexibility with their multi-conductor
connection. You can connect conductors
with a nominal cross section either with or
without ferrules. It is not necessary to
tighten the terminal block screws, since
they are prevented from loosening by the
Reakdyn principle, a screw locking
technique developed by Phoenix Contact.
Very large conductor cross sections up to
240mm can also be wired gas-tight and
with long-term stability thanks to the high
contact forces.
UT... screw connection terminal blocks