Datasheet


Technical data
1
) Technical data
1
)
Dimensions Width Length Height Width Length Height
[mm] 5.2 101 50.5 (NS 35/7,5) 5.2 101 50.5 (NS 35/7,5)
Max. electrical data I
max.
[A] U
max.
[V] max. Ø [mm²] AWG (UL) I
max.
[A] U
max.
[V] max. Ø [mm²] AWG (UL)
30
2
) 400 0.14 - 4 26-12 30
2
) 400 0.14 - 4 26-12
Max. bridge current [A] 24 (FBS) / 17.5 (FBSR) 24 (FBS) / 17.5 (FBSR)
Rated data IEC UL / CUL CSA Ex IEC UL / CUL CSA Ex
Rated voltage [V] 400 300 - - 400 300 - -
Nominal current / cross section [A] / [mm²] 24 / 2.5 20 / - - - 24 / 2.5 20 / - - -
Nominal current / cross section [A] / [mm²] - 16 / 1.5 (disconnect level)
Connection capacity solid stranded Ferrule
without/with plastic sleeve
solid stranded Ferrule
without/with plastic sleeve
1 conductor [mm²] 0.14 - 4 0.14 - 4 0.14 - 2.5 0.14 - 2.5 0.14 - 4 0.14 - 4 0.14 - 2.5 0.14 - 2.5
Ordering data Ordering data
Description Color Type Order No.
Pcs. /
Pkt.
Type Order No.
Pcs. /
Pkt.
Terminal block, upper level blue gray PTI 2,5-L/N 3213954 50 PTI 2,5-PE/L/NTB 3213955 50
gray PTI 2,5-L/L 3213953 50 PTI 2,5-PE/L/LTB 3213957 50
gray/blue PTI 2,5-N 3213952 50
gray PTI 2,5-L 3213951 50
Accessories
1
) Accessories
1
)
Cover, width 2.2 mm gray D-PTI/3 3213975 50 D-PTI/3B 3213976 50
Support bracket, to hold the neutral busbar, set
every 20 cm, 2 mm wide
blue AB-PTI/3 3213974 50
128
PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
2.5 mm PT... push-in connection terminal blocks
30 A, three-level terminal block, 1 x L outer
conductor, 1 x N conductor
30 A, three-level terminal block, 1 x L outer
conductor, 1 x N conductor can be
disconnected, 1 x PE
Notes:
1
) For additional accessories and technical data, see page 110.
2
) 3-pos. termination block.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
Installation terminal blocks