Datasheet

For further information and full technical data, visit phoenixcontact.net/products
151PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
35 mm PTPOWER Power-Turn high-current terminal blocks
With PTPOWER35, the reducing bridge
enables terminal blocks with different
nominal cross sections to be connected
easily, e.g., to a PT2,5 or PT4 push-in
terminal block. Power blocks can be created
quickly using the reducing bridge.
Distribute potentials with the isolated
insertion bridges. They can be installed
easily without any tools and latch securely in
the clamping space. Thanks to their special
design, they can also be easily identified
following conductor connection.
The fully insulated and optional snap-on
tap-off terminal block enables easy voltage
tap-off for two conductors up to 16 mm.
With large-surface marking option and
integrated 2.3 mm test connection.
Test connection on both sides for
standard test plugs with a diameter of
2.3 mm. High-current terminal block
versions with 4 mm test connection in the
terminal center are available for the use of
4 mm test plugs.
Large-surface, clear marking of the
terminal points is essential for reliable and
time-saving installation. Furthermore, it
provides an optimum overview in the
control cabinet.
Pre-assembled terminal block bases
reduce mounting and storage costs. The
right terminal block base for DIN rail or
direct mounting is available for every
function.

Your web code: #0158