Datasheet

https://www.phoenixcontact.com/us/produkte/2964322
Nov 9, 20132/7
Solid-state relay terminal block-DEK-OV- 24DC/ 24DC/
10-2964322
Technical data
Input data
Nominal input voltage U
N
24 V DC
Input voltage range in reference to U
N
0.8 ... 1.2
Switching threshold "0" signal in reference to U
N
≤ 0.4
Switching threshold "1" signal in reference to U
N
≥ 0.8
Typical input current at U
N
3.5 mA
Typical response time
250 µs
Typical turn-off time
800 µs
Operating voltage display
Yellow LED
Type of protection
Protection against polarity reversal
Type of protection
Surge protection
Transmission frequency
100 Hz
Output data
Output voltage range
5 V DC ... 30 V DC
Limiting continuous current
10 A (see derating curve)
Surge current
100 A (t = 20 ms)
Voltage drop at max. limiting continuous current
≤ 50 mV
Output circuit
3-conductor, ground-referenced
Type of protection
Protection against polarity reversal
Type of protection
Surge protection
Connection data
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
14
General
Test voltage input/output
2.5 kV AC
Mounting position
Any
Assembly instructions
In rows with zero spacing
Operating mode
100% operating factor
Name
Standards/regulations
Standards/regulations
IEC 60664
Standards/regulations
EN 50178
Standards/regulations
IEC 62103