Datasheet

UNO-PS/1AC/24DC/150W
106261_en_02 PHOENIX CONTACT 10
7.3 Mounting on a DIN rail
The power supply unit can be installed on all 35 mm DIN rails
according to EN 60715.
Figure 6 Mounting on a DIN rail
7.4 Normal mounting position
When installed, the input terminal blocks must be at the bot-
tom and the output terminal blocks at the top.
If the power supply unit is installed in a mounting position
other than the normal mounting position, the output power
must be reduced.
Figure 7 Normal mounting position
BA
Input AC
100V-240V
L
N
++ ––
Output DC
24V 150W
24-28 V
DC OK
UNO POWER