Datasheet

https://www.phoenixcontact.com/us/produkte/2865573
Nov 13, 20131/8
Temperature measuring transducer-MACX MCR-EX-SL-RTD-I-
NC-2865573
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Ex-i temperature measuring transducer: Converts signals from resistance thermometers installed in
Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way
isolation, SIL2

Product Features
Power supply possible via DIN rail connector
Input for resistance thermometers and resistance-type sensors, [Ex ia] IIC
Programming during operation with Ex measuring circuit connected and also voltage-free using IFS-USB-PROG-ADAPTER
programming adapter
Installation in zone 2, protection type "n" (EN 60079-15) permitted
Up to SIL 2 according to EN 61508
0 ... 20 mA or 4 ... 20 mA output
Configuration via software (FDT/DTM): sensor type, connection technology, measuring range, measuring unit, filter, alarm signal,
and output range
3-way electrical isolation
Status indicator for supply voltage, cable, sensor, and module errors
Key commercial data
package_quantity
1
GTIN
4046356160520
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (no condensation)
Degree of protection
IP20