Datasheet

https://www.phoenixcontact.com/us/produkte/2708740
Nov 14, 20132/6
Interface converters-FL COM SERVER RS485-2708740
Technical data
Serial interface
Interface
RS-485 2-wire
Connection method
D-SUB-9 male connector
File format/coding
Serial asynchronous UART/NRZ, 7/8 data, 1/2 stop, 1 parity,
10/11-bit character length
Termination resistor
390 Ω - 180 Ω - 390 Ω (can be connected)
Data flow control/protocols
Automatic control // Modbus RTU/ASCII
Serial transmission speed
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,
187500 Bit/s, can be set with web-based management
Power supply
Nominal supply voltage
24 V AC/DC ±20 % (via pluggable COMBICON screw terminal
block)
Nominal supply voltage
24 V DC ±5 % (as an alternative or redundant, via backplane bus
contact and system current supply)
Typical current consumption
max. 100 mA
General
Electrical isolation
(VCC // Ethernet // RS-485)
Test voltage data interface/data interface
1.5 kV
rms
(50 Hz, 1 min.)
Test voltage data interface/power supply
1.5 kV
rms
Test voltage data interface/power supply
1.5 kV
rms
(50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Noise emission
EN 50081-2
Net weight
190 g
Housing material
PA V0, color green
Color
green
MTBF
666 Years (Telcordia standard, 25°C temperature, 21% operating
cycle (5 days a week, 8 hours a day))
MTBF
179 Years (Telcordia standard, 40°C temperature, 34.25%
operating cycle (5 days a week, 12 hours a day))
Function
Management
Web-based management, SNMP or Factory Manager Software FL
SWT
Status and diagnostic indicators
LEDs: UL (communication voltage), AC (data activity RS-485), FD
(full duplex): 100 (100Base-T (X) operation), COL (collision) link
and receive LED for Ethernet port
classifications
eCl@ss
eCl@ss 4.0
27250504
eCl@ss 4.1
27250504
eCl@ss 5.0
27250504
eCl@ss 5.1
27250504
eCl@ss 6.0
27250504