Datasheet
https://www.phoenixcontact.com/us/products/0829414
03/06/2018Page1/3
Zack marker strip-ZB 3,5:UNBEDRUCKT-0829414
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm
Why buy this product
Other pitches available on request
Labeling service: Phoenix Contact can custom-label all zack marker strip markers according to your requirements
The multi-section marking strips are easy to fit and can be easily separated if required
Unlabeled marking strips can be custom-labeled with a plotter or by hand
The ZB zack marker strip system is a marking solution for modular terminal blocks and electronics modules with tall marker grooves
Key Commercial Data
Packing unit 1 STK
Minimum order quantity 10 STK
GTIN
GTIN 4046356554152
Weight per Piece (excluding packing) 1.000 g
Custom tariff number 39269097
Country of origin Germany
Technical data
Dimensions
Width (a) 3.5 mm
Ambient conditions
Ambient temperature (operation) -40 °C ... 100 °C