Owner`s manual
43
English
FM radio (on Station only)
Tuning to radio stations
1 Check the set is switched on or to standby
(See Basic functions)
2 Press SOURCE once or more to select Radio
(on the remote control, press TUNER/AUX
once or more)
➜ Playback screen appears. Display shows:
Radio, r adio station frequency and If
programmed, a preset number
3 Press and hold 3 or 4 until the frequency
in the display starts running
➜ The radio automatically tunes to a station of
sufficient reception. Display shows searching
during automatic tuning
➜ If a station is received in stereo, is
shown
4 Repeat step 3 if necessary until you find the
desired radio station
● To tune to a weak station, press 3 or 4
briefly and repeatedly until optimal reception is
found
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Autostore: automatic programming
Autostore automatically starts programming
radio stations from preset 1. Available stations
are programmed in the order of radio
frequencies.
● To select Autostore radio,
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
select
➜ Display shows: Autostore Please wait...
➜ After all stations are stored, the first autostore
preset station will then automatically play
Manual programming
1 Tune to your desired radio station (see Tuning
to radio stations)
2 On the remote control, press Program to
store the station
➜ The station is stored in the 1st vacant preset
position. Display shows its preset number
3 Repeat steps 1-2 to store other stations
SAME ARTIST
SMART EQ
Helpful hints:
– If you store more than 40 stations, the new
station will replace the 1st preset station.
p001-P052-WACS57_Eng_37 1/25/2006, 14:1243